Electromagnetic compatibility (EMC) - Part 4-15: Testing and measurement techniques - Flickermeter - Functional and design specifications

IEC 61000-4-15:2010 gives a functional and design specification for flicker measuring apparatus intended to indicate the correct flicker perception level for all practical voltage fluctuation waveforms. Information is presented to enable such an instrument to be constructed. A method is given for the evaluation of flicker severity on the basis of the output of flickermeters complying with this standard. The flickermeter specifications in this part of IEC 61000 relate only to measurements of 120 V and 230 V, 50 Hz and 60 Hz inputs. Characteristics of some incandescent lamps for other voltages are sufficiently similar to the values in Table 1 and Table 2, that the use of a correction factor can be applied for those other voltages. Some of these correction factors are provided in the Annex B. Detailed specifications for voltages and frequencies other than those given above, remain under consideration. The object of this part of IEC 61000 is to provide basic information for the design and the instrumentation of an analogue or digital flicker measuring apparatus. It does not give tolerance limit values of flicker severity. This second edition cancels and replaces the first edition published in 1997 and its Amendment 1 (2003) and constitutes a technical revision. This new edition, in particular, adds or clarifies the definition of several directly measured parameters, so that diverging interpretations are avoided. It has the status of a basic EMC publication in accordance with IEC Guide 107. NEW! IEC 61000-4-15:2010 is also available as IEC Standards+ 61000-4-15:2010 which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.

Elektromagnetische Verträglichkeit (EMV) - Teil 4-15: Prüf- und Messverfahren - Flickermeter - Funktionsbeschreibung und Auslegungsspezifikation

Compatibilité électromagnétique (CEM) - Partie 4-15: Techniques d'essai et de mesure - Flickermètre - Spécifications fonctionnelles et de conception

La CEI 61000-4-15:2010 traite des spécifications fonctionnelles et de conception d'un appareil mesurant le flicker, destiné à indiquer le niveau correct de perception du flicker du flux lumineux (le flicker) pour toutes les formes d'ondes de fluctuation de la tension rencontrées dans la pratique. On y présente des informations permettant de construire un tel instrument. Une méthode d'évaluation de la sévérité du flicker est fournie à partir des résultats obtenus avec des flickermètres en conformité avec cette norme. Les spécifications du flickermètre dans cette partie concernent uniquement les mesures des entrées de 120 V et 230 V, 50 Hz et 60 Hz. Les caractéristiques de certaines lampes à incandescence pour d'autres tensions sont suffisamment similaires aux valeurs des Tableaux 1 et 2 pour que l'utilisation d'un facteur de correction puisse être appliquée à ces autres tensions. Certains de ces facteurs de correction sont fournis à l'Annexe B. Des spécifications détaillées pour des tensions et des fréquences autres que celles données ci-dessus sont à l'étude. L'objet de la présente partie de la CEI 61000 est de fournir les informations nécessaires à la conception et à la réalisation d'un flickermètre analogique ou numérique. Elle ne spécifie pas les valeurs limites tolérables du flicker. Cette deuxième édition annule et remplace la première édition publiée en 1997 et son amendement 1 (2003), et constitue une révision technique. Cette nouvelle édition, en particulier, ajoute ou clarifie la définition de plusieurs paramètres mesurés directement, de telle façon que l'on évite des interprétations divergentes. Elle a le statut de publication fondamentale en CEM en accord avec le Guide 107 de la CEI. NEW! La CEI 61000-4-15:2010 est également disponible sous forme de IEC Standards+ 61000-4-15:2010 qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.

Elektromagnetna združljivost (EMC) - 4-15. del: Preskusne in merilne tehnike - Flikermeter - Specifikacije funkcij in zasnove (IEC 61000-4-15:2010 (EQV))

Ta del IEC 61000 podaja specifikacije funkcij in zasnove za aparat za merjenje flikerja, ki kaže pravilno raven zaznavanja flikerja pri vseh praktičnih valovnih oblikah nihanja napetosti. Informacije so navedene zato, da se omogoči izdelava takega instrumenta. Podana je metoda za vrednotenje intenzitete flikerja na osnovi izhodnih signalov flikermetrov, ki so v skladu s tem standardom. Specifikacije flikermetrov v tem delu IEC 61000 se nanašajo samo na meritve pri vhodnih napetostih 120 V in 230 V ter frekvencah 50 Hz in 60 Hz. Značilnosti nekaterih svetilk z žarilno nitko za druge napetosti so dovolj podobne vrednostim v preglednici 1 in 2, tako da se lahko pri teh napetostih uporabi korekcijski faktor. Nekateri od teh korekcijskih faktorjev so navedeni v dodatku B. Podrobne specifikacije za napetosti in frekvence, ki niso navedene zgoraj, se še obravnavajo. Namen tega dela IEC 61000 je zagotoviti osnovne informacije za načrtovanje, izdelavo in uporabo analognih ali digitalnih aparatov za merjenje flikerja. Ne navaja tolerančnih mejnih vrednosti za intenzivnost flikerja.

General Information

Status
Published
Publication Date
09-Jun-2011
Withdrawal Date
01-Jan-2014
Current Stage
6060 - Document made available - Publishing
Start Date
10-Jun-2011
Completion Date
10-Jun-2011

Relations

Buy Standard

Standard
EN 61000-4-15:2011
English language
43 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Elektromagnetna združljivost (EMC) - 4-15. del: Preskusne in merilne tehnike - Flikermeter - Specifikacije funkcij in zasnove (IEC 61000-4-15:2010 (EQV))Compatibilité électromagnétique (CEM) - Partie 4-15: Techniques d'essai et de mesure - Flickermètre - Spécifications fonctionnelles et de conceptionElectromagnetic compatibility (EMC) - Part 4-15: Testing and measurement techniques - Flickermeter - Functional and design specifications33.100.01Elektromagnetna združljivost na splošnoElectromagnetic compatibility in generalICS:Ta slovenski standard je istoveten z:EN 61000-4-15:2011SIST EN 61000-4-15:2011en01-september-2011SIST EN 61000-4-15:2011SLOVENSKI
STANDARDSIST EN 61000-4-15:2001/A1:2003SIST EN 61000-4-15:20011DGRPHãþD



SIST EN 61000-4-15:2011



EUROPEAN STANDARD EN 61000-4-15 NORME EUROPÉENNE
EUROPÄISCHE NORM June 2011
CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2011 CENELEC -
All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61000-4-15:2011 E
ICS 33.100.20 Supersedes EN 61000-4-15:1998 + A1:2003
English version
Electromagnetic compatibility (EMC) -
Part 4-15: Testing and measurement techniques -
Flickermeter -
Functional and design specifications (IEC 61000-4-15:2010)
Compatibilité électromagnétique (CEM) - Partie 4-15: Techniques d'essai et de mesure -
Flickermètre -
Spécifications fonctionnelles et de conception (CEI 61000-4-15:2010)
Elektromagnetische Verträglichkeit (EMV) -
Teil 4-15: Prüf- und Messverfahren -
Flickermeter -
Funktionsbeschreibung und Auslegungsspezifikation (IEC 61000-4-15:2010)
This European Standard was approved by CENELEC on 2011-01-02. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
SIST EN 61000-4-15:2011



EN 61000-4-15:2011 - 2 - Foreword The text of document 77A/722/FDIS, future edition 2 of IEC 61000-4-15, prepared by SC 77A, Low frequency phenomena, of IEC TC 77, Electromagnetic compatibility was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61000-4-15 on 2011-01-02. This European Standard supersedes EN 61000-4-15:1998 + A1:2003. EN 61000-4-15:2011, in particular, adds or clarifies the definition of several directly measured parameters, so that diverging interpretations are avoided. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent rights. The following dates were fixed: – latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement
(dop)
2011-10-02 – latest date by which the national standards conflicting
with the EN have to be withdrawn
(dow)
2014-01-02 Annex ZA has been added by CENELEC. __________ Endorsement notice The text of the International Standard IEC 61000-4-15:2010 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following note has to be added for the standard indicated: IEC 61000-4-30 NOTE
Harmonized as EN 61000-4-30. __________ SIST EN 61000-4-15:2011



- 3 - EN 61000-4-15:2011 Annex ZA
(normative)
Normative references to international publications with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
NOTE
When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies.
Publication Year Title EN/HD Year
IEC 60068 Series Environme
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.