EN 60684-3-284:2014

Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 284: Heat-shrinkable sleevings, for oil barrier applications

IEC 60684-3-284:2014 gives the requirements for heat-shrinkable sleevings for oil barrier, medium voltage cable jointing and termination applications, with nominal shrink ratios of up to 3:1. These sleevings have been found suitable for use up to temperatures of 80 °C. Included are Type A: polyolefin based and Type B: fluoropolymer based, enhanced oil resistance. These sleevings are normally supplied as translucent. Since these types of sleevings cover a significantly large range of sizes and wall thicknesses, Annex A, Tables A.1 and A.2, in this document, provide a guide to the range of sizes available. The actual size will be agreed between the purchaser and supplier. Materials which conform to this standard meet established levels of performance. However, the selection of a material by a user for a specific application should be based on the actual requirements necessary for adequate performance in that application and not based on this standard alone. This sleeving is designed to be used in MV cable accessories and as such, electrical performance as defined as part of the assembly. Examples of this are described in HD 629 and IEC 60502 series. Keywords: heat-shrinkable sleevings, oil barrier, medium voltage cable jointing, termination applications

Isolierschläuche - Teil 3: Anforderungen für einzelne Schlauchtypen - Blatt 284: Wärmeschrumpfschläuche mit ölsperrenden Eigenschaften

Gaines isolantes souples - Partie 3: Spécifications pour types particuliers de gaines - Feuille 284: Gaines thermorétractables pour applications de barrière résistant à l'huile

L'IEC 60684-3-284:2014 fournit les exigences relatives aux gaines thermorétractables pour applications de jonction et de terminaison de câble moyenne tension avec barrière résistant à l'huile, possédant des rapports de rétr-eint nominaux jusqu'à 3:1. Ces gaines se sont révélées être adaptées à une utilisation à des températures allant jusqu'à 80 °C Type A; à base de polyoléfine. Type B; à base de fluoropolymère, résistance améliorée à l'huile. Ces gaines sont normalement fournies en matériau translucide. Comme ces types de gaines couvrent une gamme très large de dimensions et d'épaisseurs de paroi, l'Annexe A, les Tableaux A.1 et A.2, du présent document fournissent des lignes directrices sur la gamme des dimensions disponibles. La dimension réelle fera l'objet d'un accord entre l'acheteur et le fournisseur. Les matériaux conformes à la présente norme satisfont à des niveaux de performance établis. Cependant, il convient que le choix d'un matériau par un utilisateur pour une application particulière soit fondé sur les exigences réelles nécessaires pour obtenir les performances satisfaisantes pour cette application, et qu'il ne soit pas fondé uniquement sur la présente norme. Ces gaines sont conçues pour être utilisées dans des accessoires de câbles moyenne tension et, en conséquence, les performances électriques sont définies dans le cadre de l'assemblage concerné. De tels exemples sont décrits dans le HD 629 et l'IE applications de jonction et de terminaison de câble moyenne tension C 60502. Mots clés: Gaines thermorétractables, barrière résistant à l'huile, de terminaison de câble moyenne tension applications

Gibke izolacijske cevi - 3. del: Specifikacije za posamezne vrste cevi - 284. list: Toplotno skrčljive cevi za oljne pregrade

Ta del standarda IEC 60684 določa zahteve za toplotno skrčljive cevi za oljne pregrade, srednjenapetostne kabelske spoje in zaključke, z nazivnimi razmerji krčenja do 3:1. Te cevi so primerne za uporabo pri temperaturah do 80 °C.
Tip A: na poliolefinski podlagi.
Tip B: na fluoropolimerni podlagi, boljša odpornost proti olju.
Te cevi se običajno dobavljajo prosojne.
Ker ta tipa cevi zajemata bistveno velik razpon velikosti in debelin sten, so v tabelah A.1 in A.2 v dodatku A tega dokumenta zagotovljena navodila glede razpona razpoložljivih velikosti. O dejanski velikosti se dogovorita kupec in dobavitelj.
Materiali, ki so skladni s tem standardom, ustrezajo določenim ravnem delovanja. Vendar mora uporabnik material za določeno uporabo izbrati glede na dejanske zahteve, ki omogočajo ustrezno delovanje pri tej uporabi, in ne samo na podlagi tega standarda. Ta cev je zasnovana za uporabo s srednjenapetostnimi kabli, kot taka pa tudi električna zmogljivost, kot je določena kot del sestava. Primeri so opisani v skupini standardov HD 629 in IEC 60502.

General Information

• Status: Published
• Publication Date: 11-Dec-2014
• Withdrawal Date: 26-Nov-2017
• ICS: 29.035.20 - Plastics and rubber insulating materials
• Technical Committee: CLC/SR 15 - Insulating materials
• Drafting Committee: IEC/TC 15 - IEC_TC_15
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 12-Dec-2014
• Completion Date: 12-Dec-2014
• Ref Project: SIST EN 60684-3-284:2015 - Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 284: Heat-shrinkable, sleevings, for oil barrier applications

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 60684-3-284:2015
01-september-2015
*LENHL]RODFLMVNHFHYLGHO6SHFLILNDFLMH]DSRVDPH]QHYUVWHFHYLOLVW
7RSORWQRVNUþOMLYHFHYL]DROMQHSUHJUDGH
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet
284: Heat-shrinkable, sleevings, for oil barrier applications
Isolierschläuche - Teil 3: Anforderungen für einzelne Schlauchtypen - Blatt 284:
Wärmeschrumpfschläuche mit ölsperrenden Eigenschaften
Gaines isolantes souples - Partie 3: Spécifications pour types particuliers de gaines -
Feuille 284: Gaines thermorétractables pour applications de barrière résistant à l'huile
Ta slovenski standard je istoveten z: EN 60684-3-284:2014
ICS:
29.035.20 3ODVWLþQLLQJXPHQLL]RODFLMVNL Plastics and rubber insulating
PDWHULDOL materials
SIST EN 60684-3-284:2015 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 60684-3-284:2015

---------------------- Page: 2 ----------------------

SIST EN 60684-3-284:2015


EUROPEAN STANDARD EN 60684-3-284

NORME EUROPÉENNE

EUROPÄISCHE NORM
December 2014
ICS 29.035.20

English Version
Flexible insulating sleeving - Part 3: Specifications for individual
types of sleeving - Sheet 284: Heat-shrinkable, sleevings, for oil
barrier applications
(IEC 60684-3-284:2014)
Gaines isolantes souples - Partie 3: Spécifications pour Isolierschläuche - Teil 3: Anforderungen für einzelne
types particuliers de gaines - Feuille 284: Gaines Schlauchtypen - Blatt 284: Wärmeschrumpfschläuche mit
thermorétractables pour applications de barrière résistant à ölsperrenden Eigenschaften
l'huile (IEC 60684-3-284:2014)
(CEI 60684-3-284:2014)
This European Standard was approved by CENELEC on 2014-11-27. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 60684-3-284:2014 E

---------------------- Page: 3 ----------------------

SIST EN 60684-3-284:2015
EN 60684-3-284:2014 - 2 -
Foreword
The text of document 15/693/CDV, future edition 1 of IEC 60684-3-284, prepared by IEC/TC 15 "Solid
electrical insulating materials" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN 60684-3-284:2014.
The following dates are fixed:
(dop) 2015-08-27
• latest date by which the document has to be implemented at
national level by publication of an identical national
standard or by endorsement
(dow) 2017-11-27
• latest date by which the national standards conflicting with
the document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 60684-3-284:2014 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60684-3 (all sheets) NOTE Harmonized as EN 60684-3 (all sheets) (not modified).
IEC 60757:1983 NOTE Harmonized as HD 457 S1:1985 (not modified).

---------------------- Page: 4 ----------------------

SIST EN 60684-3-284:2015
- 3 - EN 60684-3-284:2014
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indi
...