EN IEC 62769-150-1:2023

Field device integration (FDI)® - Part 150-1: Profiles - ISA100

IEC 62769-150-1:2023 is available as IEC 62769-150-1:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 62769-150-1:2023 specifies an FDI profile of IEC 62769 for IEC 62734 (ISA100.11a)[1]. [1] ISA100 WIRELESSTM is a trade name of the non-profit consortium Wireless Compliance Institute. This information is given for the convenience of users of this standard and does not constitute an endorsement by IEC of the trademark holder or any of its products. Compliance does not require use of the trade name. Use of the trade name requires permission of the trade name holder.

Feldgeräteintegration (FDI) - Teil 150-1: Profile - ISA100 WIRELESS

Intégration des appareils de terrain (FDI)® - Partie 150-1: Profils - ISA100

IEC 62769-150-1:2023 est disponible sous forme de IEC 62769-150-1:2023 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.L'IEC 62769-150-1:2023 spécifie un profil FDI de l'IEC 62769 pour le profil ISA100.11a[1] défini dans l'IEC 62734. [1] ISA100 WIRELESSTM est une appellation commerciale du consortium Wireless Compliance Institute, une organisation à but non lucratif. Cette information est donnée à l'intention des utilisateurs de la présente norme et ne signifie nullement que l'IEC approuve le détenteur des appellations commerciales ou l'emploi de ses produits. La conformité n'exige pas l'utilisation de l'appellation commerciale. L'utilisation de l'appellation commerciale exige l'autorisation du détenteur de l'appellation commerciale.

Integracija procesne naprave (FDI)® - 150-1. del: Profili - ISA100 (IEC 62769-150-1:2023)

Ta del standarda IEC 62769 določa profil FDI® 1 standarda IEC 62769 za IEC 62734 (ISA100.11a) 2.

General Information

• Status: Published
• Publication Date: 25-May-2023
• ICS: 25.040.40 - Industrial process measurement and control
• ICS: 35.100.05 - Multilayer applications
• ICS: 35.240.50 - IT applications in industry
• Technical Committee: CLC/TC 65X - Industrial-process measurement, control and automation
• Drafting Committee: IEC/SC 65E - IEC_SC_65E
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 26-May-2023
• Due Date: 28-Oct-2022
• Completion Date: 26-May-2023
• Ref Project: SIST EN IEC 62769-150-1:2023 - Field device integration (FDI)® - Part 150-1: Profiles - ISA100 (IEC 62769-150-1:2023)

Relations

• Replaces: EN IEC 62769-150-1:2021 - Field device integration (FDI) - Part 150-1: Profiles - ISA100 WIRELESS
• Effective Date: 09-Nov-2021

Overview

EN IEC 62769-150-1:2023 (also published as IEC 62769-150-1:2023 RLV) defines an FDI (Field Device Integration) profile for ISA100 wireless field devices. This second-edition standard specifies how ISA100 (IEC 62734 / ISA100.11a) devices are represented, discovered and managed within the FDI framework, including catalog profiles, information-model mappings, topology elements and service methods. The publication includes the international standard and a redline (RLV) showing technical changes versus the previous edition.

Key Topics

• FDI profile for ISA100 WIRELESS: formalizes an FDI profile aligned with IEC 62734 (ISA100.11a), enabling consistent device integration.
• Catalog profile & protocol support file: defines capability files and protocol version information required to present ISA100 device capabilities to FDI tools.
• Device-package association: rules for mapping FDI packages to device types and revisions (device type identification mapping).
• Information model mapping: mapping of device types, functional groups, BlockType properties and object parameter sets to the FDI information model.
• Topology elements & schemas: formal definitions for connection points, communication devices, network descriptions and a normative Topology Scan result schema (Annex A).
• Methods and transfer services: standardized FDI methods for communication servers, gateways and devices (Connect, Disconnect, Transfer, GetPublishedData), plus Transfer service parameters (Annex B).
• Conventions & syntax: EDDL and XML syntax, capitalizations and namespace usage (notable addition in this edition).

Applications

This standard is intended to enable interoperable, vendor-neutral integration of ISA100 wireless field devices into host systems and engineering tools by:

• Allowing FDI host tools to discover ISA100 networks and devices using a consistent topology schema.
• Enabling device manufacturers to supply FDI packages and protocol files so their ISA100 devices integrate seamlessly into control systems.
• Allowing system integrators and automation engineers to manage ISA100 device configuration, diagnostics and data access through FDI-compliant software.
• Supporting gateway and communication server implementations that bridge ISA100 wireless networks with plant automation and OPC UA infrastructures.

Who should use this standard

• Device vendors developing ISA100 wireless field instruments
• FDI tool and host software developers
• System integrators and plant automation engineers
• Certification and compliance organizations working with industrial wireless devices

Related standards

• IEC 62734 (ISA100.11a) - Wireless communication network and communication profiles
• IEC 62769 (FDI) series - Parts 4–7 (FDI Packages, Information Model, Technology Mappings, Communication Devices)
• IEC 61804 series (EDDL / Function Blocks)
• IEC 62541-100 (OPC UA Device Interface)

Keywords: EN IEC 62769-150-1:2023, FDI profile, Field Device Integration, ISA100, IEC 62734, wireless field devices, industrial automation, device profiles, topology schema.

Standards Content (Sample)

SLOVENSKI STANDARD
01-november-2023
Integracija procesne naprave (FDI)® - 150-1. del: Profili - ISA100 (IEC 62769-150-
1:2023)
Field device integration (FDI)® - Part 150-1: Profiles - ISA100 (IEC 62769-150-1:2023)
Feldgeräteintegration (FDI) - Teil 150-1: Profile - ISA100 WIRELESS (IEC 62769-150-
1:2023)
Intégration des appareils de terrain (FDI)® - Partie 150-1: Profils - ISA100 (IEC 62769-
150-1:2023)
Ta slovenski standard je istoveten z: EN IEC 62769-150-1:2023
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.240.50 Uporabniške rešitve IT v IT applications in industry
industriji
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 62769-150-1

NORME EUROPÉENNE
EUROPÄISCHE NORM May 2023
ICS 25.040.40; 35.100.05; 35.240.50 Supersedes EN IEC 62769-150-1:2021
English Version
Field device integration (FDI)® - Part 150-1: Profiles - ISA100
(IEC 62769-150-1:2023)
Intégration des appareils de terrain (FDI)® - Partie 150-1: Feldgeräteintegration (FDI) - Teil 150-1: Profile - ISA100
Profils - ISA100 WIRELESS
(IEC 62769-150-1:2023) (IEC 62769-150-1:2023)
This European Standard was approved by CENELEC on 2023-05-24. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62769-150-1:2023 E

European foreword
The text of document 65E/866/CDV, future edition 2 of IEC 62769-150-1, prepared by SC 65E
"Devices and integration in enterprise systems" of IEC/TC 65 "Industrial-process measurement,
control and automation" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN IEC 62769-150-1:2023.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2024-02-24
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2026-05-24
document have to be withdrawn
This document supersedes EN IEC 62769-150-1:2021 and all of its amendments and corrigenda (if
any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 62769-150-1:2023 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 62769 (series) NOTE Approved as EN IEC 62769 (series)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the
relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cencenelec.eu.
Publication Year Title EN/HD Year
IEC 62734 2014 Industrial networks - Wireless EN 62734 2015
communication network and
communication profiles - ISA 100.11a
IEC 61804 series Function blocks (FB) for process control EN IEC 61804 series
and electronic device description language
(EDDL)
IEC/TR 62541-2 - OPC unified Architecture - Part 2: Security CLC IEC/TR 62541-2 -
Model
IEC 62541-100 2015 OPC Unified Architecture - Part 100: EN 62541-100 2015
Device Interface
IEC 62769-4 - Field Device Integration (FDI®) - Part 4: EN IEC 62769-4 -
FDI Packages
IEC 62769-5 - Field Device Integration (FDI®) - Part 5: EN IEC 62769-5 -
FDI Information Model
IEC 62769-6 - Field Device Integration (FDI®) - Part 6: EN IEC 62769-6 -
FDI Technology Mappings
IEC 62769-7 - Field Device Integration (FDI®) - Part 7: EN IEC 62769-7 -
Communication Devices
IEC 62769-150-1 ®
Edition 2.0 2023-04
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Field device integration (FDI)® –
Part 150-1: Profiles – ISA100
Intégration des appareils de terrain (FDI)® –
Partie 150-1: Profils – ISA100
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 25.040.40; 35.100.05; 35.240.50 ISBN 978-2-8322-6358-7
– 2 – IEC 62769-150-1:2023 © IEC 2023
CONTENTS
FOREWORD . 4
1 Scope . 6
2 Normative references . 6
3 Terms, definitions, abbreviated terms and acronyms . 7
3.1 Terms and definitions . 7
3.2 Abbreviated terms and acronyms . 7
4 Conventions . 7
4.1 EDDL syntax . 7
4.2 XML syntax . 7
4.3 Capitalizations . 8
5 Profile for ISA100 WIRELESS. 8
5.1 General . 8
5.2 Catalog profile . 8
5.2.1 Protocol support file . 8
5.2.2 CommunicationProfile definition . 9
5.2.3 Profile device . 9
5.2.4 Protocol version information . 9
5.3 Associating a Package with a device . 9
5.3.1 Device type identification mapping . 9
5.3.2 Device type revision mapping . 10
5.4 Information Model mapping . 10
5.4.1 ProtocolType definition . 10
5.4.2 DeviceType mapping . 11
5.4.3 FunctionalGroup identification definition . 11
5.4.4 BlockType property mapping . 11
5.4.5 Mapping to Object ParameterSet . 12
5.5 Topology elements . 12
5.5.1 ConnectionPoint definition . 12
5.5.2 Communication Device definition . 14
5.5.3 Communication service provider definition . 15
5.5.4 Network definition . 16
5.6 Methods . 17 ®
5.6.1 Methods for FDI Communication Servers . 17
5.6.2 Methods for Gateways . 21
Annex A (normative) Topology Scan result schema . 22
A.1 General . 22
A.2 Target Namespace . 22
A.3 Network . 22
A.4 ISA100_WirelessNetworkT . 22
A.5 ISA100_WirelessConnectionPointT . 23
A.6 ISA100_WirelessIdentificationT. 23
A.7 ISA100_WirelessAddressT . 24
A.8 ISA_WirelessObjIdentificationT . 24
Annex B (normative) Transfer service parameters . 26
B.1 General . 26
B.2 sendData . 26

IEC 62769-150-1:2023 © IEC 2023 – 3 –
B.3 receiveData . 26
B.4 TransferSendDataT . 26
B.5 OperationT . 27
B.6 TransferResultDataT . 27
Bibliography . 28

Table 1 – Capability file part . 8
Table 2 – Protocol Version Information . 9
Table 3 – Device identification information mapping . 10
Table 4 – Device type catalog mapping . 10
Table 5 – Protocol type ISA100 WIRELESS . 11
Table 6 – Inherited DeviceType property mapping . 11
Table 7 – ISA100 Wireless Device Types identification attributes . 11
Table 8 – Inherited BlockType property mapping. 12
Table 9 – ConnectionPointType ConnnectionPoint_ISA100_Wireless definition . 13
Table 10 – Method Connect arguments . 17
Table 11 – Method Disconnect arguments . 18
Table 12 – Method Transfer arguments . 19
Table 13 – Method GetPublishedData arguments. 20
Table A.1 – Elements of ISA100_WirelessNetworkT . 22
Table A.2 – Elements of ISA100_WirelessConnectionPointT . 23
Table A.3 – Attributes of ISA100_WirelessIdentificationT . 24
Table A.4 – Attributes of ISA100_WirelessObjIdentificationT . 25
Table B.1 – Attributes of TransferSendDataT . 27
Table B.2 – Enumerations of OperationT . 27
Table B.3 – Attributes of TransferResultDataT . 27

– 4 – IEC 62769-150-1:2023 © IEC 2023
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________ ®
FIELD DEVICE INTEGRATION (FDI ) –

Part 150-1: Profiles – ISA100
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
rights. IEC shall not be held responsible for identifying any or all such patent rights.
IEC 62769-150-1 has been prepared by subcommittee 65E: Devices and integration in
enterprise systems, of IEC technical committee 65: Industrial-process measurement, control
and automation. It is an International Standard.
This second edition cancels and replaces the first edition published in 2021. This edition
constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous
edition:
a) added namespace to Annex A.

IEC 62769-150-1:2023 © IEC 2023 – 5 –
The text of this International Standard is based on the following documents:
Draft Report on voting
65E/866/CDV 65E/923/RVC
Full information on the voting for its approval can be found in the report on voting indicated in
the above table.
The language used for the development of this International Standard is English.
This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in
accordance with ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC Supplement, available
at www.iec.ch/members_experts/refdocs. The main document types developed by IEC are
described in greater detail at www.iec.ch/standardsdev/publications.
A list of all parts in the IEC 62769 series, published under the general title Field device ®
integration (FDI ), can be found on the IEC website.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under "http://webstore.iec.ch" in the data related to
the specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
– 6 – IEC 62769-150-1:2023 © IEC 2023 ®
FIELD DEVICE INTEGRATION (FDI ) –

Part 150-1: Profiles – ISA100
1 Scope
®1 2
This part of IEC 62769 specifies an FDI profile of IEC 62769 for IEC 62734 (ISA100.11a) .
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies.
For undated references, the latest edition of the referenced document (including any
amendments) applies.
IEC 62734:2014: Industrial networks – Wireless communication network and communication
profiles – ISA 100.11a
IEC 61804 (all parts), Devices and integration in enterprise systems – Function blocks (FB) for
process control and electronic device description language (EDDL)
IEC TR 62541-2, OPC unified architecture – Part 2: Security Model
IEC 62541-100:2015, OPC unified architecture – Part 100: Device Interface
IEC 62734:2014, Industrial networks – Wireless communication network and communication
profiles – ISA 100.11a
® ®
IEC 62769-4, Field device integration (FDI ) – Part 4: FDI Packages ®
IEC 62769-5, Field device integration (FDI ) – Part 5: Information Model ®
IEC 62769-6, Field device integration (FDI ) – Part 6: Technology Mapping ®
IEC 62769-7, Field device integration (FDI ) – Part 7: Communication devices
___________
FDI is a registered trademark of the non-profit organization Fieldbus Foundation, Inc. This information is given
for the convenience of users of this document and does not constitute an endorsement by IEC of the trademark
holder or any of its products. Compliance does not require use of the trade name. Use of the trade name requires
permission of the trade name holder.
2 TM
ISA100 WIRELESS is a trade name of the non-profit consortium Wireless Compliance Institute. This information is given
for the convenience of users of this standard and does not constitute an endorsement by IEC of the trademark holder or any
of its products. Compliance does not require use of the trade name. Use of the trade name requires permission of the trade
name holder.
IEC 62769-150-1:2023 © IEC 2023 – 7 –
3 Terms, definitions, abbreviated terms and acronyms
3.1 Terms and definitions
For the purposes of this document, the terms and definitions given in, IEC 61804 (all parts),
IEC TR 62541-2, IEC 62541-100, IEC 62734, IEC 62769-4, IEC 62769-5, IEC 62769-7 and the
following apply.
ISO and IEC maintain terminological databases for use in standardization at the following
addresses:
• IEC Electropedia: available at http://www.electropedia.org/
• ISO Online browsing platform: available at http://www.iso.org/obp
3.1.1
Object
basic entity which defines standardized behavior and features in a ISA100 WIRELESS device
3.2 Abbreviated terms and acronyms
For the purposes of this specification, the following abbreviations apply.
EDD Electronic Device Description
EDDL Electronic Device Description Language (see IEC 61804 (all parts)) ®
FDI Field Device Integration
FCG FieldComm Group
XML Extensible markup language (see REC-xml-20081126)
CFF Common file format
UAP User Application Process
UAPMO User Application Process Management Object
DMO Device Management Object
IM  Information Model
SM  System Manager
WCI Wireless Compliance Institute
CP  Communication profile
4 Conventions
4.1 EDDL syntax ®
This part of IEC 62769 specifies content for the EDD component that is part of FDI
Communication Packages. The specification content using EDDL syntax uses the font Courier
New. The EDDL syntax is used for method signature, variable, data structure and component
declarations.
4.2 XML syntax
XML syntax examples use font Courier New. The XML syntax is used to describe XML
document schema.
Example:

– 8 – IEC 62769-150-1:2023 © IEC 2023
4.3 Capitalizations ®
The IEC 62769 series uses capitalized terms to emphasize that these terms have a FDI
specific meaning.
Some of these terms using an acronym as a prefix for example ®
• FDI Client, or ®
• FDI Server.
Some of these terms are compound terms such as:
• Communication Servers, or
• Profile Package.
Parameter names or attributes are concatenated to a single term, where the original terms start
in this term with a capital letter such as:
• ProtocolSupportFile or
• ProtocolType.
Parameter names or attributes can also be constructed by using an underscore character to
concatenate two or more terms such as:
• DEVICE_REV or
• DEVICE_MODEL
5 Profile for ISA100 WIRELESS
5.1 General ®
This profile specifies the protocol specifics needed for FDI Packages describing
communication servers, gateways and devices.
Annex B defines the XML schema for Direct Access Services.
5.2 Catalog profile
5.2.1 Protocol support file
5.2.1.1 Capability file ®
Each ISA100 WIRELESS FDI Device Package shall contain a capability file. The capability file
part is described in Table 1.
Table 1 – Capability file part
Parameter Description
Content Type: txt/plain
Root Namespace: Not applicable
Source Relationship: http://fdi-cooperation.com/2010/relationships/attachment-protocol
Filename: Use file extension .CFF

IEC 62769-150-1:2023 © IEC 2023 – 9 –
5.2.2 CommunicationProfile definition
IEC 62769-4 defines a CommunicationProfileT string for the Catalog XML schema. The ISA100
WIRELESS specific value shall be “ISA100_Wireless”.
5.2.3 Profile device
Not supported in this document.
5.2.4 Protocol version information
IEC 62769-4 defines an element type named InterfaceT for the Catalog XML schema. The
element type InterfaceT contains an element named Version which is supposed to provide
version information about the applied communication protocol profile. The value has to follow
the IEC 62769-4 defined version information schema defined in the element type VersionT.
ISA100 WIRELESS defines the version of the protocol as a value of the parameter
DMO.Comm_SW_Minor_Version. A value of 0 indicates protocol version 2009 and a value of 1
indicates protocol version 2011. The general rule is to use the value of
DMO.Comm_SW_Minor_Version parameter as the major version part of VersionT and the value
“0” for the minor version and build parts Table 2 shows the protocol version information:
Table 2 – Protocol Version Information
Protocol Version InterfaceT Version value
ISA100 WIRELESS 2009 1.0.0
ISA100 WIRELESS 2011 2.0.0
The Protocol Version defined in a package is provided for informational purposes
only, and shall not be used to determine the compatibility or applicability of a package
to a device.
5.3 Associating a Package with a device
5.3.1 Device type identification mapping ®
The purpose of device type identification mapping is to enable FDI host systems to compare ®
the scan result against the topology representation in the Information Model. FDI host systems ®
shall also be enabled to determine the FDI Device Package that fits for a device entry ®
contained in the scan result. This will enable the user of an FDI host system to synchronize
the Information Model with the actual installation.
The Communication Server implemented scan service (defined in 5.6.1.7 provides the scan
result through an XML document (the schema is defined in Clause A.6).
The scan result contains device type identification and device instance identification. ®
FDI host systems comparing the actual network topology configuration against the topology
representation in the Information Model shall be enabled to handle the following situations:
a) The physical Device instance identified at a specific device address is not logically present ®
in the Information Model (as Instance): Enable the FDI Host system to find the appropriate ®
FDI Device Package according to the device catalog information.
b) The physical Device instance identified by the device address is logically present in the ®
Information Model (as Instance): Enable the FDI Host system to compare device type
information presented in scan result (see the identification in Clause A.6) and the device
type specific information of the Instance present in the Information Model.

– 10 – IEC 62769-150-1:2023 © IEC 2023 ®
The FDI Device Package contains device type identification information that can be compared
to scan result based on the Catalog Schema in IEC 62769-4 defining the XML (simple) element
types “DeviceModel” and “Manufacturer”.
® ®
As a result of the FDI Package deployment the FDI Package information is then present in
the Information Model as the specified FunctionalGroup Identification containing SerialNumber
and Tag (see 5.4.3).
The mapping between different device identification data sources is described in Table 3. Since
scan results provided by the Communication Server can convey data that is produced by the
device (firmware) the device type identification mapping shall be supported by providing ®
corresponding data in the FDI Device Package contained Catalog and Information Model.
Table 3 – Device identification information mapping
® Information Model Communication Server provided
FDI Device Package
scan result
Catalog specified type FunctionalGroup: Element (path):
Identification ConnectionPoint/Identification
Manufacturer
Browse Name: Manufacturer Attribute: Manufacturer
Catalog specified type FunctionalGroup: Element (path):
Identification ConnectionPoint/Identification
DeviceModel
Browse Name: DeviceModel Attribute: DeviceModel

ISA100 WIRELESS device types are uniquely identified by the parameters
UAPMO.IDENT_NUMBER found in the UAPMO. The IDENT_NUMBER parameter contains the
Vendor ID, Model ID and Device Revision. These parameters are used to associate a given
® ®
device instance to an FDI Device Package. These parameters are mapped to the FDI Device
Package Catalog according to Table 4.
Table 4 – Device type catalog mapping
Catalog Element CP Mapping
Manufacturer element of InterfaceT (IEC 62769-4) UAPMO.IDENT_NUMBER 0x00FFFFFF00000000
String format “0xdddddd” where dddddd is theVendor ID
number in hexadecimal format.
DeviceModel element of InterfaceT (IEC 62769-4) UAPMO.IDENT_NUMBER 0x00000000FFFF0000String
format “0xdddd” where dddd is the Model ID number in
hexadecimal format.
DeviceRevision element UAPMO.IDENT_NUMBER 0x000000000000FFFF
ListOfSupportedDeviceRevisionsT (IEC 62769-4)
String format “x.0.0” where x is the Device Revision in
decimal format (no leading zeros).

5.3.2 Device type revision mapping ®
IEC 62769-4 envisions a concept that allows to determine the compatibility between an FDI
Device Package and a Device. IEC 62769-4 specifies a life cycle management process bearing
on a single version information provided for the entire device. Mapping of version information
is defined in Table 4.
5.4 Information Model mapping
5.4.1 ProtocolType definition
In Table 5 a subtype of ProtocolType is defined to identify network communication using this
profile.
SIST EN IE
...