prEN IEC 60335-2-108:2025
(Main)Household and similar electrical appliances - Safety - Part 2-108: Particular requirements for electrolysers
Household and similar electrical appliances - Safety - Part 2-108: Particular requirements for electrolysers
This European standards Deals with the safety of electrolysers that produce low viscosity, ionized liquids intended for use as detergent free wash water in appliances for household and similar purposes and which conform with the standards applicable to such appliances. It applies to electrolysers tested separately, under the most severe conditions that may be expected to occur in normal use, their rated voltage being not more than 250 V.
Sicherheit elektrischer Geräte für den Hausgebrauch und ähnliche Zwecke - Teil 2-108: Besondere Anforderungen für Elektrolysatoren
Appareils électrodomestiques et analogues - Sécurité - Partie 2-108: Règles particulières pour les électrolyseurs
L’IEC 60335-2-108:2024 traite de la sécurité des électrolyseurs qui produisent des liquides ionisés à faible viscosité destinés à être utilisés comme eau de lavage sans détergent dans les appareils à usages domestiques et analogues et qui sont conformes aux normes applicables à de tels appareils. Elle s’applique aux électrolyseurs soumis aux essais séparément, dans les conditions les plus sévères qui peuvent se produire en utilisation normale, et dont la tension assignée est inférieure ou égale à 250 V, y compris les appareils alimentés en courant continu et les appareils alimentés par batteries. Exemples d’appareils qui peuvent contenir des électrolyseurs: - les lave-vaisselle (IEC 60335-2-5); - les machines à laver le linge (IEC 60335-2-7); - les appareils produisant de l’eau de lavage à caractère hygiénique. La présente norme ne remplace pas les exigences des normes applicables aux appareils particuliers qui utilisent un électrolyseur. Toutefois, si l’électrolyseur utilisé est conforme à la présente norme, les essais spécifiés pour l’électrolyseur dans la norme de l’appareil particulier peuvent ne pas être nécessaires s’il est intégré dans l’appareil particulier ou fait partie d’un assemblage. Si le dispositif de commande de l’électrolyseur est associé au dispositif de commande de l’appareil particulier, des essais supplémentaires peuvent être nécessaires sur l’appareil final. Des recommandations pour les exigences supplémentaires à prendre en considération pour être rajoutées dans les normes de produit fini des appareils utilisant des électrolyseurs sont données à l’Annexe BB informative. L’attention est attirée sur le fait que: - pour les appareils destinés à être utilisés dans des véhicules ou à bord de navires ou d'aéronefs, des exigences supplémentaires peuvent être nécessaires; - dans de nombreux pays, des exigences supplémentaires sont spécifiées par les organismes nationaux de la santé, par les organismes nationaux responsables de la protection des travailleurs, par les organismes nationaux responsables de l'alimentation en eau et par des organismes similaires. La présente norme ne s'applique pas: - aux appareils prévus exclusivement pour des usages industriels; - aux appareils destinés à être utilisés dans des locaux qui présentent des conditions particulières, telles que la présence d'une atmosphère corrosive ou explosive (poussière, vapeur ou gaz). Cette deuxième édition annule et remplace la première édition parue en 2008. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: a) le texte a été aligné sur l'IEC 60335-1:2020; b) certaines notes ont été converties en texte normatif (Article 1, 22.012); c) introduction de l’application du calibre d’essai 19 (8.1.1, 20.2, B22.3, B22.4); d) ajout d’exigences relatives aux températures des surfaces accessibles extérieures (Article 11). La présente partie 2 doit être utilisée conjointement avec la dernière édition de l'IEC 60335-1:2020 et ses amendements sauf si cette édition l'exclut; dans ce cas, la dernière édition qui n'exclut pas la présente partie 2 est utilisée. Elle a été établie sur la base de la sixième édition (2020) de cette norme.
Gospodinjski in podobni električni aparati - Varnost - 2-108. del: Posebne zahteve za elektrolizatorje
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-maj-2025
Gospodinjski in podobni električni aparati - Varnost - 2-108. del: Posebne zahteve
za elektrolizatorje
Household and similar electrical appliances - Safety - Part 2-108: Particular requirements
for electrolysers
Sicherheit elektrischer Geräte für den Hausgebrauch und ähnliche Zwecke - Teil 2-108:
Besondere Anforderungen für Elektrolysatoren
Appareils électrodomestiques et analogues - Sécurité - Partie 2-108: Règles particulières
pour les électrolyseurs
Ta slovenski standard je istoveten z: prEN IEC 60335-2-108:2025
ICS:
13.120 Varnost na domu Domestic safety
97.060 Aparati za nego perila Laundry appliances
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD DRAFT
prEN IEC 60335-2-108
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2025
ICS 13.120; 97.060 Will supersede EN 60335-2-108:2008
English Version
Household and similar electrical appliances - Safety - Part 2-108:
Particular requirements for electrolysers
(IEC 60335-2-108:2024)
Appareils électrodomestiques et analogues - Sécurité - Sicherheit elektrischer Geräte für den Hausgebrauch und
Partie 2-108: Règles particulières pour les électrolyseurs ähnliche Zwecke - Teil 2-108: Besondere Anforderungen für
(IEC 60335-2-108:2024) Elektrolysatoren
(IEC 60335-2-108:2024)
This draft European Standard is submitted to CENELEC members for enquiry.
Deadline for CENELEC: 2025-06-13.
The text of this draft consists of the text of IEC 60335-2-108:2024 (61/6955/CDV).
If this draft becomes a European Standard, CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CENELEC in three official versions (English, French, German).
A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to
the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2025 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Project: 80665 Ref. No. prEN IEC 60335-2-108:2025 E
European foreword
This document (prEN IEC 60335-2-108:2025) consists of the text of document IEC 60335-2-108:2024,
prepared by IEC/TC 61 "Safety of household and similar electrical appliances".
This document is currently submitted to the Enquiry.
The following dates are proposed:
• latest date by which the existence of this document (doa) dav + 6 months
has to be announced at national level
• latest date by which this document has to be (dop) dav + 12 months
implemented at national level by publication of an
identical national standard or by endorsement
• latest date by which the national standards (dow) dav + 36 months
conflicting with this document have to be withdrawn (to be confirmed or
modified when voting)
This document will supersede EN 60335-2-108:2008 and all of its amendments and corrigenda (if any).
This document is read in conjunction with prEN IEC 60335-2-108:2025/prAA:2025.
IEC 60335-2-108 ®
Edition 2.0 2024-03
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Household and similar electrical appliances – Safety –
Part 2-108: Particular requirements for electrolysers
Appareils électrodomestiques et analogues – Sécurité –
Partie 2-108: Règles particulières pour les électrolyseurs
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 13.120, 97.060 ISBN 978-2-8322-8460-5
– 2 – IEC 60335-2-108:2024 © IEC 2024
CONTENTS
FOREWORD . 4
INTRODUCTION . 7
1 Scope . 9
2 Normative references . 10
3 Terms and definitions . 10
4 General requirement . 10
5 General conditions for the tests . 10
6 Classification . 11
7 Marking and instructions . 11
8 Protection against access to live parts . 11
9 Starting of motor-operated appliances . 12
10 Power input and current . 12
11 Heating . 12
12 Charging of metal-ion batteries . 13
13 Leakage current and electric strength at operating temperature . 13
14 Transient overvoltages . 13
15 Moisture resistance . 13
16 Leakage current and electric strength . 13
17 Overload protection of transformers and associated circuits . 14
18 Endurance . 14
19 Abnormal operation . 14
20 Stability and mechanical hazards . 14
21 Mechanical strength . 14
22 Construction . 14
23 Internal wiring . 16
24 Components . 16
25 Supply connection and external flexible cords . 16
26 Terminals for external conductors . 16
27 Provision for earthing . 16
28 Screws and connections . 16
29 Clearances, creepage distances and solid insulation . 16
30 Resistance to heat and fire . 16
31 Resistance to rusting . 16
32 Radiation, toxicity and similar hazards . 17
Annexes . 18
Annex B (normative) Battery-operated appliances, separable batteries and detachable
batteries for battery-operated appliances . 19
Annex AA (normative) Ageing test for elastomeric parts . 20
Annex BB (informative) Guidance for additional requirements to be considered for
inclusion in the end product standards for appliances that incorporate electrolysers . 22
Bibliography . 23
IEC 60335-2-108:2024 © IEC 2024 – 3 –
Figure 101 – Probe for measuring surface temperatures . 17
Table 101 – Maximum temperature rises for specified external accessible surfaces
under normal operating conditions . 13
– 4 – IEC 60335-2-108:2024 © IEC 2024
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES –
SAFETY –
Part 2-108: Particular requirements for electrolysers
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as "IEC Publication(s)"). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) IEC draws attention to the possibility that the implementation of this document may involve the use of (a)
patent(s). IEC takes no position concerning the evidence, validity or applicability of any claimed patent rights in
respect thereof. As of the date of publication of this document, IEC had not received notice of (a) p
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.