Electric vehicle conductive charging system - Part 21-1: Electric vehicle on-board charger EMC requirements for conductive connection to an AC/DC supply

IEC 61851-21-1:2017(E), together with IEC 61851-1:2010, gives requirements for conductive connection of an electric vehicle (EV) to an AC or DC supply. It applies only to on-board charging units either tested on the complete vehicle or tested on the charging system component level (ESA - electronic sub assembly). This document covers the electromagnetic compatibility (EMC) requirements for electrically propelled vehicles in any charging mode while connected to the mains supply. This first edition, together with IEC 61851-21-2, cancels and replaces IEC 61851-21:2001. It constitutes a technical revision. This edition includes the following significant technical changes with respect to IEC 61851‑21:2001: a) this document addresses now only EMC tests instead of other electrical tests; b) test setups are defined more precisely; c) Annex A "Artificial networks, asymmetric artificial networks and integration of charging stations into the test setup" was added.

Konduktive Ladesysteme für Elektrofahrzeuge – Teil 21-1: EMV-Anforderungen an Bordladegeräte für Elektrofahrzeuge mit Wechselstrom-/Gleichstromversorgung

Système de charge conductive pour véhicules électriques - Partie 21-1: Exigences relatives à la CEM concernant les chargeurs embarqués pour véhicules électriques pour la connexion conductive à une alimentation en courant alternatif ou continu

L'IEC 61851-21-1:2017 , ainsi que l’IEC 61851-1:2010, spécifient les exigences relatives à la connexion conductive d’un véhicule électrique (VE) à une alimentation en courant alternatif ou continu. Elle ne s’applique qu’aux unités de charge embarquées soumises à essai soit sur le véhicule complet, soit au niveau des composants du système de charge (SEEE – sous-ensemble électrique/électronique). Le présent document couvre les exigences de compatibilité électromagnétique (CEM) pour les véhicules à propulsion électrique, quel que soit le mode de charge, lorsqu’ils sont connectés au réseau électrique. Il ne s’applique pas aux trolleybus, véhicules ferroviaires, camions et véhicules industriels conçus principalement pour une exploitation non routière, tels que les engins forestiers et de construction. L'IEC 61851-21-1:2017, conjointement avec l’IEC 61851-21-2, annule et remplace l’IEC 61851 21:2001. Elle constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l’IEC 61851 21:2001: a) le présent document traite désormais uniquement des essais CEM, et non plus des autres essais électriques; b) les configurations d’essai sont définies de manière plus précise; c) l’Annexe A "Réseaux fictifs, réseaux fictifs asymétriques et intégration des bornes de charge dans la configuration d’essai" a été ajoutée.

Sistem kabelskega napajanja električnih vozil - 21-1. del: Zahteve EMC za vgrajen napajalnik pri kabelski priključitvi na izmenično/enosmerno napajanje

Ta del standarda IEC 61851 skupaj s standardom IEC 61851-1:2010 podaja zahteve za kabelsko priključitev električnega vozila (EV) na izmenično/enosmerno napajanje. Uporablja se samo za notranje napajalne enote, preskušene na celotnem vozilu ali na ravni sestavnih delov napajalnega sistema (ESA – elektronski podsklop).
Ta dokument zajema zahteve glede elektromagnetne združljivosti (EMC) za vozila z električnim pogonom v katerem koli načinu napajanja med priključitvijo na električno omrežje.
Ta dokument se ne uporablja za trolejbuse, železniška vozila, industrijske kamione in vozila, zasnovana predvsem za terensko uporabo, kot so gozdarski in gradbeni stroji.
OPOMBA 1: Posebne varnostne zahteve, ki se uporabljajo za opremo na vozilu med napajanjem, so obravnavane v ločenih dokumentih, kot je navedeno v ustreznih točkah tega dokumenta.
OPOMBA 2: Električno vozilo (EV) vključuje vozila, ki so izključno električna, in hibridna električna vozila s priključkom ter dodatnim motorjem z notranjim izgorevanjem.

General Information

Status
Published
Publication Date
26-Oct-2017
Withdrawal Date
26-Oct-2020
Current Stage
6060 - Document made available - Publishing
Start Date
27-Oct-2017
Completion Date
27-Oct-2017

Relations

Buy Standard

Standard
EN 61851-21-1:2018
English language
51 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.DQMHElectric vehicle conductive charging system - Part 21-1: Electric vehicle onboard charger EMC requirements for conductive connection to an a.c./d.c. supply43.120Electric road vehiclesICS:Ta slovenski standard je istoveten z:EN 61851-21-1:2017SIST EN 61851-21-1:2018en01-januar-2018SIST EN 61851-21-1:2018SLOVENSKI
STANDARDSIST EN 61851-21:20021DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 61851-21-1
October 2017 ICS 43.120
English Version
Electric vehicle conductive charging system -
Part 21-1: Electric vehicle on-board charger EMC requirements for conductive connection to an AC/DC supply (IEC 61851-21-1:2017)
Système de charge conductive pour véhicules électriques - Partie 21-1: Exigences relatives à la CEM concernant les chargeurs embarqués pour véhicules électriques pour la connexion conductive à une alimentation en courant alternatif ou continu (IEC 61851-21-1:2017)
Konduktive Ladesysteme für Elektrofahrzeuge -
Teil 21-1: EMV-Anforderungen an Bordladegeräte für Elektrofahrzeuge mit Wechselstrom/Gleichstrom-Versorgung (IEC 61851-21-1:2017) This European Standard was approved by CENELEC on 2017-07-24. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17,
B-1000 Brussels © 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 61851-21-1:2017 E SIST EN 61851-21-1:2018

The following dates are fixed: • latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2018-04-27 • latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2020-10-27
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Association.
Endorsement notice The text of the International Standard IEC 61851-21-1:2017 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 61851-21-2:—1 NOTE Harmonized as EN 61851-21-2:—2. ISO 15118-3 NOTE Harmonized as EN ISO 15118-3. CISPR 16-1-4:2010 NOTE Harmonized as EN 55016-1-4:2010 (not modified). CISPR 16-1-4:2010/A1:2012 NOTE Harmonized as EN 55016-1-4:2010/A1:2012 (not modified). CISPR 16-1-4:2010/A2:2017 NOTE Harmonized as EN 55016-1-4:2010/A2:2017 (not modified).
1 Under preparation. Stage at the time of publication: IEC PRVC 61851-21-2:2017. 2 Under preparation. Stage at the time of publication: FprEN 61851-21-2:2017. SIST EN 61851-21-1:2018

(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1
Where an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies.
NOTE 2
Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60038 (mod) 2009
IEC standard voltages EN 60038 3 2011
IEC 61000-3-2 2014
Electromagnetic compatibility (EMC) -
Part 3-2: Limits - Limits for harmonic current emissions (equipment input current ≤ 16 A per phase) EN 61000-3-2 2014
IEC 61000-3-3 2013
Electromagnetic compatibility (EMC) -
Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current ≤ 16 A per phase and not subject to conditional connection EN 61000-3-3 2013
IEC 61000-3-11 2000
Electromagnetic compatibility (EMC) -
Part 3-11: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems - Equipment with rated current ≤ 75 A and subject to conditional connection EN 61000-3-11 2000
IEC 61000-3-12 2011
Electromagnetic compatibility (EMC) -
Part 3-12: Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current > 16 A and ≤ 75 A per phase EN 61000-3-12 2011
IEC 61000-4-4 2012
Electromagnetic compatibility (EMC) -
Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test EN 61000-4-4 2012
IEC 61000-4-5 2014
Electromagnetic compatibility (EMC) -
Part 4-5: Testing and measurement techniques - Surge immunity test EN 61000-4-5 2014
IEC 61000-6-3 2006
Electromagnetic compatibility (EMC) -
Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments EN 61000-6-3 2007
+A1 2010
+A1 2011 IEC 61851-1 2010
Electric vehicle conductive charging system - Part 1: General requirements EN 61851-1 2011
3 The title of EN 60038 is "CENELEC standard voltages". SIST EN 61851-21-1:2018

CISPR 12 2007
Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of off-board receivers EN 55012 2007
+A1 2009
+A1 2009
CISPR 16-1-2 2014
Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-2: Radio disturbance and immunity measuring apparatus - Coupling devices for conducted disturbance measurements EN 55016-1-2 2014
CISPR 16-2-1 2014
Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-1: Methods of measurement of disturbances and immunity - Conducted disturbance measurements EN 55016-2-1 2014
CISPR 22 (mod) 2008
Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement EN 55022 +AC 2010 4 2011 4 CISPR 25 2016
Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of on-board receivers EN 55025 2017
ISO/TR 8713 2012
Electrically propelled road vehicles - Vocabulary - -
ISO 7637-2 2011
Road vehicles - Electrical disturbances from conduction and coupling -
Part 2: Electrical transient conduction along supply lines only - -
ISO 11451-1 2015
Road vehicles - Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy -
Part 1: General principles and terminology - -
ISO 11451-2 2015
Road vehicles - Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy -
Part 2: Off-vehicle radiation sources - -
ISO 11452-1 2015
Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -
Part 1: General principles and terminology - -
ISO 11452-2 2004
Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -
Part 2: Absorber-lined shielded enclosure - -
ISO 11452-4 2011
Road vehicles - Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -
Part-4: Harness excitation methods - -
4 Superseded by EN 55032:2012 (CISPR 32:2012) and EN 50561-1:2013. SIST EN 61851-21-1:2018

IEC 61851-21-1 Edition 1.0 2017-06 INTERNATIONAL STANDARD
Electric vehicle conductive charging system –
Part 21-1: Electric vehicle on-board charger EMC requirements for conductive connection to an AC/DC supply
INTERNATIONAL ELECTROTECHNICAL COMMISSION
ICS 43.120
ISBN 978-2-8322-4432-6
– 2 – IEC 61851-21-1:2017 © IEC 2017 CONTENTS FOREWORD . 5 1 Scope . 7 2 Normative references . 7 3 Terms and definitions . 8 4 General test conditions . 9 5 Test methods and requirements . 10 5.1 General . 10 5.1.1 Overview . 10 5.1.2 Exceptions . 10 5.2 Immunity . 10 5.2.1 General . 10 5.2.2 Function performance criteria . 11 5.2.3 Test severity level . 11 5.2.4 Immunity of vehicles to electrical fast transient/burst disturbances conducted along AC and DC power lines . 12 5.2.5 Immunity of vehicles to surges conducted along AC and DC power lines . 12 5.2.6 Immunity to electromagnetic radiated RF-fields . 15 5.2.7 Immunity to pulses on supply lines . 20 5.2.8 Immunity test and severity level overview . 20 5.3 Emissions . 23 5.3.1 Test conditions . 23 5.3.2 Emissions of harmonics on AC power lines . 23 5.3.3 Emission of voltage changes, voltage fluctuations and flicker on AC power lines . 26 5.3.4 High-frequency conducted disturbances on AC or DC power lines . 27 5.3.5 High-frequency conducted disturbances on network and telecommunication access . 30 5.3.6 High-frequency radiated disturbances . 32 5.3.7 Radiated disturbances on supply lines . 37 Annex A (normative)
Artificial networks, asymmetric artificial networks and integration
of charging stations into the test setup . 38 A.1 Overview. 38 A.2 Charging station and power mains connection . 38 A.3 Artificial networks (AN) . 39 A.3.1 General . 39 A.3.2 Low voltage (LV) powered component . 39 A.3.3 High voltage (HV) powered component . 40 A.3.4 Components involved in charging mode connected to DC power supply . 42 A.4 Artificial mains networks (AMN) . 43 A.5 Asymmetric artificial networks (AAN) . 43 A.5.1 General . 43 A.5.2 Symmetric communication lines (e.g. CAN) . 43 A.5.3 PLC on power lines. 44 A.5.4 PLC (technology) on control pilot . 45 Bibliography . 47
Figure 1 – Electrical fast transient/burst test vehicle setup . 12 SIST EN 61851-21-1:2018

IEC 61851-21-1:2017 © IEC 2017 – 3 –
Figure 2 – Vehicle in co
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.