EN 62421:2007
(Main)Electronics assembly technology - Electronic modules
Electronics assembly technology - Electronic modules
Provides a generic standard of electronic modules on which their sectional standards are based. Also provides a definition, business model, interface between the trading partners, and related areas of standardization of electronic modules. In addition a generic set of test method is provided.
Montageverfahren für elektronische Baugruppen - Elektronikmodule
Techniques d'assemblage des composants électroniques - Modules électroniques
L'IEC 62421:2007 consiste en une norme générique relative aux modules électroniques sur laquelle sont fondées les normes intermédiaires associées. Il fournit une définition, un modèle commercial, une interface entre les partenaires commerciaux, et les domaines concernés par la normalisation des modules électroniques. De plus une série de méthode d'essai générique est fournie.
Tehnologija elektronskega sestavljanja - Elektronski moduli (IEC 62421:2007)
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 62421:2008
01-februar-2008
Tehnologija elektronskega sestavljanja - Elektronski moduli (IEC 62421:2007)
Electronics assembly technology - Electronic modules
Montageverfahren für elektronische Baugruppen - Elektronikmodule
Techniques d'assemblage des composants électroniques - Modules électroniques
Ta slovenski standard je istoveten z: EN 62421:2007
ICS:
31.190
SIST EN 62421:2008 en,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
EUROPEAN STANDARD
EN 62421
NORME EUROPÉENNE
October 2007
EUROPÄISCHE NORM
ICS 31.190
English version
Electronics assembly technology -
Electronic modules
(IEC 62421:2007)
Techniques d'assemblage Montageverfahren
des composants électroniques - für elektronische Baugruppen -
Modules électroniques Elektronikmodule
(CEI 62421:2007) (IEC 62421:2007)
This European Standard was approved by CENELEC on 2007-10-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2007 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62421:2007 E
---------------------- Page: 2 ----------------------
EN 62421:2007 - 2 -
Foreword
The text of document 91/689/FDIS, future edition 1 of IEC 62421, prepared by IEC TC 91, Electronics
assembly technology, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC
as EN 62421 on 2007-10-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2008-07-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2010-10-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 62421:2007 was approved by CENELEC as a European
Standard without any modification.
__________
---------------------- Page: 3 ----------------------
- 3 - EN 62421:2007
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
IEC 60068 Series Environmental testing EN 60068-1 Series
1)
IEC 60068-1 1988 Environmental testing - EN 60068-1 1994
Part 1: General and guidance
2) 3)
IEC 60068-2-1 - Environmental testing - EN 60068-2-1 2007
Part 2-1: Tests - Test A: Cold
2) 3)
IEC 60068-2-2 - Environmental testing - EN 60068-2-2 2007
Part 2-2: Tests - Test B: Dry heat
2) 3)
IEC 60068-2-6 - Environmental testing - EN 60068-2-6 1995
Part 2-6: Tests - Test Fc: Vibration
(sinusoidal)
2) 3)
IEC 60068-2-14 - Environmental testing - EN 60068-2-14 1999
Part 2-14: Tests - Test N: Change of
temperature
2) 3)
IEC 60068-2-20 - Environmental testing - HD 323.2.20 S3 1988
Part 2-20: Tests - Test T: Soldering
2) 3)
IEC 60068-2-21 - Environmental testing - EN 60068-2-21 2006
Part 2-21: Tests - Test U: Robustness of
terminations and integral mounting devices
2) 3)
IEC 60068-2-27 - Environmental testing - EN 60068-2-27 1993
Part 2-27: Tests - Test Ea and guidance:
Shock
2) 3)
IEC 60068-2-45 - Environmental testing -
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.