iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN IEC 60728-11:2023

(Main)

Cable networks for television signals, sound signals and interactive services - Part 11: Safety

Cable networks for television signals, sound signals and interactive services - Part 11: Safety

This part of IEC 60728 deals with the safety requirements applicable to fixed sited systems and equipment. As far as applicable, it is also valid for mobile and temporarily installed systems, for example, caravans. Additional requirements may be applied, for example, referring to: • electrical installations of buildings and overhead lines, • other telecommunication services distribution systems, • water distribution systems, • gas distribution systems, • lightning systems. This document is intended to provide requirements specifically for the safety of the system, personnel working on it, subscribers and subscriber equipment. It deals only with safety aspects and is not intended to define a standard for the protection of the equipment used in the system.

Kabelnetze für Fernsehsignale, Tonsignale und interaktive Dienste - Teil 11: Sicherheitsanforderungen

Réseaux de distribution par câbles pour signaux de télévision, signaux de radiodiffusion sonore et services interactifs - Partie 11: Sécurité

IEC 60728-11:2023 est disponible sous forme de IEC 60728-11:2023 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.

Kabelska omrežja za televizijske in zvokovne signale ter interaktivne storitve - 11. del: Varnost (IEC 60728-11:2023)

General Information

Status
Published
Publication Date
29-Jun-2023
ICS
33.060.40 - Cabled distribution systems
Technical Committee
CLC/TC 209 - Cable networks for television signals, sound signals and interactive services
Drafting Committee
IEC/TC 100 - IEC_TC_100
Current Stage
6060 - Document made available - Publishing
Start Date
30-Jun-2023
Completion Date
30-Jun-2023
Directive
2014/35/EU - Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits
Mandate
M/511 - Mandate to CEN, CENELEC and ETSI relating to harmonised standards in the field of the Low Voltage Directive
Ref Project
SIST EN IEC 60728-11:2024 - Cable networks for television signals, sound signals and interactive services - Part 11: Safety (IEC 60728-11:2023)

Relations

Replaces
EN 60728-11:2017 - Cable networks for television signals, sound signals and interactive services - Part 11: Safety
Effective Date
20-Mar-2018
Replaces
EN 60728-11:2017/A11:2018 - Cable networks for television signals, sound signals and interactive services - Part 11: Safety
Effective Date
20-Mar-2018

Buy Standard

EN IEC 60728-11:2024 - BARVEEN IEC 60728-11:2024 - BARVE
PreviousNext
Standard
EN IEC 60728-11:2024 - BARVE
English language
96 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 60728-11:2024
01-februar-2024
Kabelska omrežja za televizijske in zvokovne signale ter interaktivne storitve - 11.
del: Varnost (IEC 60728-11:2023)
Cable networks for television signals, sound signals and interactive services - Part 11:
Safety (IEC 60728-11:2023)
Kabelnetze für Fernsehsignale, Tonsignale und interaktive Dienste - Teil 11:
Sicherheitsanforderungen (IEC 60728-11:2023)
Réseaux de distribution par câbles pour signaux de télévision, signaux de radiodiffusion
sonore et services interactifs - Partie 11: Sécurité (IEC 60728-11:2023)
Ta slovenski standard je istoveten z: EN IEC 60728-11:2023
ICS:
33.060.40 Kabelski razdelilni sistemi Cabled distribution systems
SIST EN IEC 60728-11:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 60728-11:2024

---------------------- Page: 2 ----------------------
SIST EN IEC 60728-11:2024


EUROPEAN STANDARD EN IEC 60728-11

NORME EUROPÉENNE

EUROPÄISCHE NORM June 2023
ICS 33.060.40 Supersedes EN 60728-11:2017; EN 60728-
11:2017/A11:2018
English Version
Cable networks for television signals, sound signals and
interactive services - Part 11: Safety
(IEC 60728-11:2023)
Réseaux de distribution par câbles pour signaux de Kabelnetze für Fernsehsignale, Tonsignale und interaktive
télévision, signaux de radiodiffusion sonore et services Dienste - Teil 11: Sicherheitsanforderungen
interactifs - Partie 11: Sécurité (IEC 60728-11:2023)
(IEC 60728-11:2023)
This European Standard was approved by CENELEC on 2023-05-23. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 60728-11:2023 E

---------------------- Page: 3 ----------------------
SIST EN IEC 60728-11:2024
EN IEC 60728-11:2023 (E)
European foreword
The text of document 100/3866/FDIS, future edition 5 of IEC 60728-11, prepared by IEC/TC 100
"Audio, video and multimedia systems and equipment" was submitted to the IEC-CENELEC parallel
vote and approved by CENELEC as EN IEC 60728-11:2023.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2024-02-23
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2026-05-23
document have to be withdrawn
This document supersedes EN 60728-11:2017 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 60728-11:2023 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standard indicated:
IEC 60364 (series) NOTE Approved as HD 60364 (series)
IEC 60728-1 NOTE Approved as EN 60728-1
2

---------------------- Page: 4 ----------------------
SIST EN IEC 60728-11:2024
EN IEC 60728-11:2023 (E)
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or a
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN IEC 60728-106:2023(Main)
Cable networks for television signals, sound signals and interactive services - Part 106: Optical equipment for systems loaded with digital channels only
SIST EN IEC 60728-106:2024

IEC 60728-106:2023 lays down the measuring methods, performance requirements and data publication requirements of optical equipment of cable networks for television signals, sound signals and interactive services loaded with digital channels only. This document • applies to all optical transmitters, receivers, amplifiers, directional couplers, isolators, multiplexing devices, connectors and splices used in cable networks; • covers the frequency range 5 MHz to 3 300 MHz; • identifies guaranteed performance requirements for certain parameters; • lays down data publication requirements with guaranteed performance; • describes methods of measurement for compliance testing. All requirements and published data relate to minimum performance levels within the specified frequency range and in well-matched conditions as might be applicable to cable networks for television signals, sound signals and interactive services.

  • Standard
    51 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60728-113:2023(Main)
Cable networks for television signals, sound signals and interactive services - Part 113: Optical systems for broadcast signal transmissions loaded with digital channels only
SIST EN IEC 60728-113:2024

IEC 60728-113:2023 is applicable to optical transmission systems for broadcast signal transmission that consist of headend equipment, optical transmission lines, in-house wirings and system outlets. These systems are primarily intended for television and sound signals using digital transmission technology. This document specifies the basic system parameters and methods of measurement for optical distribution systems between headend equipment and system outlets in order to assess the system performance and its performance limits. In this document, the upper signal frequency is limited to about 3 300 MHz. The purpose of this part of IEC 60728 is to describe the system specifications of FTTH (fibre to the home) networks for digitally modulated broadcast signal transmission. This document is also applicable to broadcast signal transmission using a telecommunication network if it satisfies the performance of the optical portion of the system defined in this document. This document describes RF transmission for fully digitalized broadcast and narrowcast (limited area distribution of broadcast) signals over FTTH, and introduces the xPON system as a physical layer media. The detailed description of the physical layer is out of scope of this document. The scope is limited to downstream RF video signal transmission over FTTH; IP transport technologies, such as IP Multicast and associate protocols, which require a two-way optical transmission system, are out of scope of this document. Some interference effects occurring between the telecommunication system and the broadcast system are addressed in Clause 7. IEC 60728-113:2023 cancels and replaces the first edition published in 2018 and IEC 60728-13-1:2017. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) IEC 60728-13-1, which deals with the bandwidth expansion for broadcast signal over FTTH systems, has been merged with this document; b) a table containing the digital signal level at the system outlet has been added.

  • Standard
    107 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60728-115:2022(Main)
Cable networks for television signals, sound signals and interactive services - Part 115: In-building optical systems for broadcast signal transmissions
SIST EN IEC 60728-115:2022

This part of IEC 60728 is applicable to in-building optical transmission systems for broadcast signal transmission that consist of optical transmitter, optical amplifiers, splitters, V-ONUs, etc. These systems are primarily intended for television and sound signals using digital transmission technology. This document specifies the basic system parameters and methods of measurement for in-building optical distribution systems between building network interface (BNI) and home network interface (HNI) in order to assess the system performance and its performance limits. This document is also applicable to broadcast signal transmission using a telecommunication network if it satisfies the requirements of optical section of this document. This document describes RF transmission for fully digitalized broadcast and narrowcast (limited area distribution of broadcast) signals over an FTTH network and introduces xPON system as a physical layer media. The detailed description of the physical layer is out of the scope of this document. The scope is limited to RF signal transmission over optical network, thus, it does not include IP transport technologies, such as IP Multicast and associate protocols. This standard specifies the required system performance of all-optical building networks in order to connect with FTTH networks which are defined by IEC60728-113 and IEC60728-13-1. Use of In-building optical networks is very effective for saving cost (installation and maintenance) and enabling future network up-grades, especially in huge apartment buildings. In this document, the optical wavelengths and electrical frequency bands listed in Table 1 - and Table 2 - are considered to be used. [Table 1 and Table 2]

  • Standard
    70 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50083-2-4:2019(Main)
Cable networks for television signals, sound signals and interactive services - Part 2-4: Interference Mitigation Filters operating in the 700 MHz and 800 MHz bands for DTT reception
SIST EN 50083-2-4:2020

This document provides requirements for passive filters intended to reduce RF interference from mobile Base Stations (BS) and User Equipment (UE) to receiving equipment and master antenna cable distribution systems of broadcast DVB-T and DVB-T2 signals in the VHF and UHF bands. While primarily intended to be used with VHF/UHF DVB-T and DVB-T2 receivers and signal distribution systems, filters can also be useful for mitigation of interference to VHF FM or DAB radio.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60728-113:2018/AC:2018-12(Corrigendum)
Cable networks for television signals, sound signals and interactive services - Part 113: Optical systems for broadcast signal transmissions loaded with digital channels only
SIST EN IEC 60728-113:2019/AC:2019

IEC - Corrected version

  • Corrigendum
    3 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60728-11:2017/A11:2018(Amendment)
Cable networks for television signals, sound signals and interactive services - Part 11: Safety
SIST EN 60728-11:2018/A11:2019

contains Common Modifications to IEC 60728-11:2016 (the RD for EN 60728-11:2017) in response to the comments raised by the LVD New Approach Consultant in his negative assessment of IEC 60728-11.

  • Amendment
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60728-113:2018(Main)
Cable networks for television signals, sound signals and interactive services - Part 113: Optical systems for broadcast signal transmissions loaded with digital channels only
SIST EN IEC 60728-113:2019

IEC 60728-113:2018 is applicable to optical transmission systems for broadcast signal transmission that consist of headend equipment, optical transmission lines, in-house wirings and system outlets. These systems are primarily intended for television and sound signals using digital transmission technology. This document specifies the basic system parameters and methods of measurement for optical distribution systems between headend equipment and system outlets in order to assess the system performance and its performance limits. In this document, the upper signal frequency is limited at about 1 000 MHz. For systems requiring more bandwidth, refer to IEC 60728-13-1. The purpose of this part of IEC 60728 is to describe the system specifications of FTTH (fibre to the home) networks for digitally modulated broadcast signal transmission. This document is also applicable to broadcast signal transmission using a telecommunication network if it satisfies the optical portion of this document. This document describes RF transmission for fully digitalized broadcast and narrowcast (limited area distribution of broadcast) signals over FTTH, and introduces xPON system as a physical layer media. The detailed description of the physical layer is out of the scope of this document. The scope is limited to RF signal transmission over FTTH, thus, it does not include IP transport technologies, such as IP Multicast and associate protocols. Some interference descriptions between the telecommunication system and the broadcast system are addressed in Clause 7.

  • Standard
    90 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
CLC/TS 50083-2-3:2018(Main)
Cable networks for television signals, sound Signals and interactive services - Part 2-3: LTE (4G) Interference Mitigation Filters
SIST-TS CLC/TS 50083-2-3:2019

This Technical Specification provides requirements to passive filters intended to reduce RF interference from LTE Base Stations (LTE-BS) and LTE User Equipment (LTE-UE) to receiving equipment and cable distribution systems of broadcast DVB-T and DVB-T2 signals in the VHF and UHF bands. While primarily intended to be used with VHF/UHF DVB-T and DVB-T2 receivers and signal distribution systems, filters can also be useful for mitigation of interference to VHF FM or DAB radio.

  • Technical specification
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60728-3:2018(Main)
Cable networks for television signals, sound signals and interactive services - Part 3: Active wideband equipment for cable networks (TA 5)
SIST EN IEC 60728-3:2018

NEW!IEC 60728-3:2017 is available as IEC 60728-3:2017 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 60728-3:2017 specifies the measuring methods, performance requirements and data publication requirements for active wideband equipment of cable networks for television signals, sound signals and interactive services. This fifth edition cancels and replaces the fourth edition published in 2010. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) extension of upper frequency range limit for cable network equipment in the forward path from 1 000 MHz to 1 218 MHz (optional up to 1 794 MHz); b) extension of upper frequency range limit for cable network equipment in the return path from 85 MHz to 204 MHz; c) integration and update of IEC 60728-3-1 content; d) integration and update of the Technical Specification CLC/TS 50083-3-3 content; e) deletion of specifications and test methods for obsolete analogue parameters; f) additional normative references; g) additional terms and definitions and abbreviations.

  • Standard
    56 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    56 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60728-11:2017(Main)
Cable networks for television signals, sound signals and interactive services - Part 11: Safety
SIST EN 60728-11:2018

IEC 60728-11:2016 deals with the safety requirements applicable to fixed sited systems and equipment. As far as applicable, it is also valid for mobile and temporarily installed systems, for example, caravans. This fourth edition cancels and replaces the third edition published in 2010. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - Correction of minimum cross-section of bonding conductor in Figure 6, Figure 14 and Figure 17. - Creation of new symbols for "overvoltage protective device - (OPD)" and for "coaxial overvoltage protective device - (COPD)". - Introduction of new OPD symbol to 3.2, Figure 3 and Figure 6. - Introduction of new COPD symbol to 3.2 and Figure 19. - In 3.1 replacement of terms CATV, MATV and SMATV by new terms and definitions due to changes in technology and use of cable networks. - Extension for remote feeding voltage on subscriber feeder. - Adaption to Edition 2.0 of the IEC 62305 series. - Deletion of informative Annex C and normative reference to the simplified software for the calculation of risk due to lightning (Annex J of IEC 62305-2:2006.) - New subclause 10.2.6 Fully-isolated system outlet provided by means of a FTTH system.

  • Standard
    94 pages
    English language
    sale 10% off
    e-Library read for
    1 day