EN 61987-21:2016
(Main)Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 21: List of Properties (LOP) of automated valves for electronic data exchange - Generic structures
Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 21: List of Properties (LOP) of automated valves for electronic data exchange - Generic structures
IEC 61987-21:2015 provides a characterization for the integration of automated valves, including control valves, automated on/off-valves and process regulators, in the Common Data Dictionary (CDD); generic structures in conformance with IEC 61987-10 for Operating Lists of Properties (OLOPs) and Device Lists of Properties (DLOPs) of final control elements.
Industrielle Leittechnik - Datenstrukturen und -elemente in Katalogen der Prozessleittechnik - Teil 21: Merkmalleisten (ML) für Stellventile für den elektronischen Datenaustausch - Allgemeine Strukturen
Mesure et commande dans les processus industriels - Structures de données et éléments dans les catalogues d'équipements de processus - Partie 21: Liste de propriétés (LOP) des vannes automatisées pour l'échange électronique de données - Structures génériques
L'IEC 61987-21:2015 fournit une caractérisation pour l'intégration des vannes automatisées, y compris des vannes de régulation, des vannes tout ou rien automatisées et des régulateurs de processus, dans le dictionnaire de données commun (CDD); les structures génériques, conformément à l'IEC 61987-10 pour les listes de propriétés fonctionnelles (OLOP) et les listes de propriétés d'appareils (DLOP), des éléments finaux de commande.
Merjenje in nadzor industrijskega procesa - Strukture podatkov in elementi v katalogih procesne opreme - 21. del: Seznam lastnosti avtomatskih ventilov za elektronsko izmenjavo podatkov - Splošne strukture (IEC 61987-21:2015)
Ta del standarda IEC 61987 zajema
• karakterizacijo za integracijo avtomatskih ventilov, vključno z nadzornimi ventili, avtomatskimi zapornimi ventili in procesnimi regulatorji, v slovar s pogostimi podatki (CDD);
• rodovne strukture v skladu s standardom IEC 61987-10 za operativne sezname lastnosti (OLOP) in sezname lastnosti naprav (DLOP) končnih nadzornih elementov.
Rodovne strukture za operativne sezname lastnosti in sezname lastnosti naprav vsebujejo najpomembnejše bloke za končne nadzorne elemente. Bloki, ki se nanašajo na določeno vrsto opreme, bodo opisani v ustreznem delu skupine standardov IEC 61987. Podobno tudi lastnosti opreme niso del tega dela standarda IEC 61987. Operativne sezname lastnosti in sezname lastnosti naprav za zasune ter rotacijske ventile boste na primer našli v delu IEC 61987-22.
OPOMBA: V okviru klasifikacije (glej tudi sliko 1) ima »končni nadzorni element« samo specializacije avtomatskih ventilov in procesnih regulatorjev. V praksi obstajajo tudi druge specializacije, ki niso obravnavane v tem standardu.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-junij-2016
Merjenje in nadzor industrijskega procesa - Strukture podatkov in elementi v
katalogih procesne opreme - 21. del: Seznam lastnosti avtomatskih ventilov za
elektronsko izmenjavo podatkov - Splošne strukture (IEC 61987-21:2015)
Industrial-Process Measurement and Control - Data Structures and Elements in Process
Equipment Catalogues - Part 21: List of Properties (LOP) of automated valves for
electronic data exchange - General structures (IEC 61987-21:2015)
Industrielle Leittechnik - Datenstrukturen und -elemente in Katalogen der
Prozessleittechnik - Teil 21: Merkmalleisten (ML) für Stellventile für den elektronischen
Datenaustausch - Allgemeine Strukturen (IEC 61987-21:2015)
Mesure et commande dans les processus industriels - Structures de données et
éléments dans les catalogues d'équipement de processus - Partie 21: Listes de
propriétés (LOP) des vannes automatisées pour l'échange électronique de données -
Structures générales (IEC 61987-21:2015)
Ta slovenski standard je istoveten z: EN 61987-21:2016
ICS:
01.110 7HKQLþQDGRNXPHQWDFLMD]D Technical product
L]GHONH documentation
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.240.50 Uporabniške rešitve IT v IT applications in industry
industriji
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN 61987-21
NORME EUROPÉENNE
EUROPÄISCHE NORM
January 2016
ICS 01.110; 25.040.40; 35.240.50
English Version
Industrial-process measurement and control - Data structures
and elements in process equipment catalogues - Part 21: List of
Properties (LOP) of automated valves for electronic data
exchange - Generic structures
(IEC 61987-21:2015)
Mesure et commande dans les processus industriels - Industrielle Leittechnik - Datenstrukturen und -elemente in
Structures de données et éléments dans les catalogues Katalogen der Prozessleittechnik - Teil 21: Merkmalleisten
d'équipements de processus - Partie 21: Liste de propriétés (ML) für Stellventile für den elektronischen Datenaustausch -
(LOP) des vannes automatisées pour l'échange électronique Allgemeine Strukturen
de données - Structures génériques (IEC 61987-21:2015)
(IEC 61987-21:2015)
This European Standard was approved by CENELEC on 2015-10-20. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 61987-21:2016 E
European foreword
The text of document 65B/996/FDIS, future edition 1 of IEC 61987-21, prepared by SC 65B
"Measurement and control devices", of IEC/TC 65 "Industrial-process measurement, control and
automation" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
The following dates are fixed:
• latest date by which the document has to be implemented at (dop) 2016-07-20
national level by publication of an identical national
standard or by endorsement
(dow) 2018-10-20
• latest date by which the national standards conflicting with
the document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
Endorsement notice
The text of the International Standard IEC 61987-21:2015 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60534-7 NOTE Harmonized as EN 60534-7.
IEC 60770-1 NOTE Harmonized as EN 60770-1.
IEC 61360-1 NOTE Harmonized as EN 61360-1.
IEC 61360-2 NOTE Harmonized as EN 61360-2.
IEC 62424 NOTE Harmonized as EN 62424.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is
available here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60534-1 - Industrial-process control valves - EN 60534-1 -
Part 1: Control valve terminology and
general considerations
IEC 61069-5 - Industrial-process measurement and EN 61069-5 -
control - Evaluation of system properties
for the purpose of system assessment -
Part 5: Assessment of system
dependability
IEC 61508-6 - Functional safety of EN 61508-6 -
electrical/electronic/programmable
electronic safety-related systems -
Part 6: Guidelines on the application of
IEC 61508-2 and IEC 61508-3
IEC 61987-1 2006 Industrial-process measurement and EN 61987-1 2007
control - Data structures and elements in
process equipment catalogues -
Part 1: Measuring equipment with
analogue and digital output
IEC 61987-10 - Industrial-process measurement and EN 61987-10 -
control - Data structures and elements in
process equipment catalogues -
Part 10: Lists of Properties (LOPs) for
Industrial-Process Measurement and
Control for Electronic Data Exchange -
Fundamentals
IEC 61987-11 - Industrial-process measurement and EN 61987-11 -
control - Data structures and elements in
process equipment catalogues -
Part 11: List of Properties (LOP) of
measuring equipment for electronic data
exchange - Generic structures
IEC 61987-21 ®
Edition 1.0 2015-09
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Industrial-process measurement and control – Data structures and elements in
process equipment catalogues –
Part 21: List of Properties (LOP) of automated valves for electronic data
exchange – Generic structures
Mesure et commande dans les processus industriels – Structures de données et
éléments dans les catalogues d’équipement de processus –
Partie 21: Liste de propriétés (LOP) des vannes automatisées pour l'échange
électronique de données – Structures génériques
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 01.110; 25.040.40; 35.240.50 ISBN 978-2-8322-2891-3
– 2 – IEC 61987-21:2015 © IEC 2015
CONTENTS
FOREWORD . 5
INTRODUCTION . 7
General. 7
Device type dictionary . 7
1 Scope . 8
2 Normative references . 8
3 Terms and definitions . 9
4 General . 9
4.1 Characterization scheme. 9
4.2 OLOP and DLOP . 10
4.3 Cardinality and polymorphism . 11
5 Operating List of Properties (OLOP) . 11
5.1 Generic block structure . 11
5.2 Base conditions . 12
5.3 Process case . 12
5.3.1 General . 12
5.3.2 Process conditions for final control elements . 13
5.3.3 Other process case variable . 13
5.4 Operating conditions for device design. 13
5.4.1 General . 13
5.4.2 Installation design conditions . 14
5.4.3 Environmental design conditions. 14
5.4.4 Process design conditions . 15
5.4.5 Design conditions for valve body assembly . 15
5.4.6 Pressure-temperature design conditions . 15
5.5 Process equipment . 15
5.5.1 General . 15
5.5.2 Line or nozzle . 16
5.6 Physical location . 16
5.6.1 General . 16
5.6.2 Available power supply . 16
5.6.3 Process criticality classification . 16
5.6.4 Area classification . 16
6 Device List of Properties (DLOP) . 17
6.1 Basic structure . 17
6.1.1 General . 17
6.1.2 Generic block structure . 17
6.1.3 Relationship to IEC 61987-1 . 19
6.2 Identification . 19
6.3 Application . 19
6.4 Parameters of . 19
6.5 Function and system design . 19
6.5.1 General . 19
6.5.2 Dependability . 19
IEC 61987-21:2015 © IEC 2015 – 3 –
6.6 Input . 19
6.6.1 General . 19
6.6.2 Control input . 20
6.6.3 Type of auxiliary input.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.