EN 61347-2-13:2014

Lamp controlgear - Part 2-13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules

IEC 61347-2-13:2014 specifies particular safety requirements for electronic controlgear for use on d.c. or a.c. supplies up to 1 000 V (a.c. at 50 Hz or 60 Hz) and at an output frequency which can deviate from the supply frequency, associated with LED modules. Controlgear for LED modules specified in this standard are designed to provide constant voltage or current at SELV or higher voltages. Deviations from the pure voltage and current types do not exclude the gear from this standard. This second edition cancels and replaces the first edition published in 2006. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition. a) Replacement of the SELV-equivalent requirements by SELV requirements and reference to the SELV requirements of Annex L in IEC 61347-1:2007/AMD2:2012. b) Reference to IEC 61347-1 for the protection against accidental contact with live parts, moisture resistance and insulation and electric strength. c) New Annex J for emergency lighting requirements.

Geräte für Lampen - Teil 2-13: Besondere Anforderungen an gleich- oder wechselstromversorgte elektronische Betriebsgeräte für LED-Module

Appareillages de lampes - Partie 2-13: Exigences particulières pour les appareillages électroniques alimentés en courant continu ou alternatif pour les modules de LED

L'IEC 61347-2-13:2014 spécifie les exigences particulières de sécurité pour les appareillages électroniques pour l'utilisation sur des alimentations en courant continu ou en courant alternatif jusqu'à 1 000 V (en courant alternatif à 50 Hz ou 60 Hz) et avec une fréquence de sortie qui peut être différente de la fréquence d'alimentation, en association avec des modules de LED. Les appareillages pour les modules de LED spécifiés dans cette norme sont conçus pour fournir une tension ou un courant constant à une tension correspondant à une TBTS ou à des tensions supérieures. Des déviations par rapport aux types de tension et courant purs n'excluent pas l'appareillage de la présente norme. Cette deuxième édition annule et remplace la première édition parue en 2006. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente. a) Remplacement des exigences relatives aux équivalents TBTS par des exigences relatives aux TBTS et référence aux exigences relatives aux TBTS de l'Annexe L de l'IEC 61347 1:2007/AMD2:2012. b) Référence à l'IEC 61347-1 en ce qui concerne la protection contre le contact accidentel avec des parties actives, la résistance à l'humidité et l'isolement et la rigidité diélectrique. c) Nouvelle Annexe J relative aux exigences s'appliquant aux éclairages de secours.

Krmilne stikalne naprave za sijalke - 2-13. del: Posebne zahteve za enosmerno ali izmenično napajane elektronske krmilne stikalne naprave za module LED (IEC 61347-2-13:2014)

Ta del standarda IEC 61347 določa posebne varnostne zahteve za elektronske krmilne stikalne naprave za uporabo pri enosmernem ali izmeničnem napajanju do 1000 V (izmenično pri 50 Hz ali 60 Hz) in pri izhodni frekvenci, ki lahko odstopa od napajalne frekvence, povezane z moduli LED. Krmilne stikalne naprave za module LED iz tega standarda so namenjene zagotavljanju konstantne napetosti ali toka pri SELV ali višjih napetostih. Odstopanja od tipov čiste napetosti in toka ne izključujejo naprav iz tega standarda.
Dodatki k standardu IEC 61347-1, ki se uporabljajo v skladu z 2. do 13. delom in uporabljajo besedo »sijalka«, naj bi prav tako zajemali module LED.
Posebne zahteve za krmilne stikalne naprave SELV so podane v dodatku I.
Zahteve glede zmogljivosti so obravnavane v standardu IEC 62384.
Vtične krmilne stikalne naprave, ki so del svetilke, so kot vgrajene krmilne stikalne naprave zajete v dodatnih zahtevah standarda za svetilke.

General Information

• Status: Published
• Publication Date: 16-Oct-2014
• Withdrawal Date: 07-Oct-2017
• ICS: 29.140.99 - Other standards related to lamps
• Technical Committee: CLC/TC 34 - 'Lamps and related equipment
• Drafting Committee: IEC/SC 34C - IEC_SC_34C
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 17-Oct-2014
• Completion Date: 17-Oct-2014
• Directive: 2006/95/EC - Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits (codified version)
• Directive: 2014/35/EU - Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits
• Directive: 2014/53/EU - Directive 2014/53/EU of The European Parliament and of the Council of 16 April 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC
• Ref Project: SIST EN 61347-2-13:2014 - Lamp controlgear - Part 2-13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules

Relations

• Replaces: EN 61347-2-13:2006 - Lamp controlgear - Part 2-13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules
• Effective Date: 28-Jan-2023
• Amended By: EN 61347-2-13:2014/A1:2017 - Lamp controlgear - Part 2-13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules
• Effective Date: 23-Jan-2023
• Revised: FprEN IEC 61347-2-13:2024 - Controlgear for electric light sources - Safety - Part 2-11: Particular requirements - Miscellaneous electronic circuits used with luminaires
• Effective Date: 19-Mar-2019

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61347-2-13:2014
01-december-2014
1DGRPHãþD
SIST EN 61347-2-13:2007
.UPLOQHVWLNDOQHQDSUDYH]DVLMDONHGHO3RVHEQH]DKWHYH]DHQRVPHUQRDOL
L]PHQLþQRQDSDMDQHHOHNWURQVNHNUPLOQHVWLNDOQHQDSUDYH]DPRGXOH/(',(&

Lamp controlgear - Part 2-13: Particular requirements for d.c. or a.c. supplied electronic
controlgear for LED modules
Geräte für Lampen - Teil 2-13: Besondere Anforderungen an gleich- oder
wechselstromversorgte elektronische Betriebsgeräte für LED-Module
Appareillages de lampes - Partie 2-13: Exigences particulières pour les appareillages
électroniques alimentés en courant continu ou en courant alternatif pour modules de
LED
Ta slovenski standard je istoveten z: EN 61347-2-13:2014
ICS:
29.130.01 Stikalne in krmilne naprave Switchgear and controlgear
na splošno in general
29.140.99 Drugi standardi v zvezi z Other standards related to
žarnicami lamps
SIST EN 61347-2-13:2014 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61347-2-13:2014

---------------------- Page: 2 ----------------------

SIST EN 61347-2-13:2014


EUROPEAN STANDARD EN 61347-2-13

NORME EUROPÉENNE

EUROPÄISCHE NORM
October 2014
ICS 29.140.99 Supersedes EN 61347-2-13:2006
English Version
Lamp controlgear - Part 2-13: Particular requirements for d.c. or
a.c. supplied electronic controlgear for LED modules
(IEC 61347-2-13:2014)
Appareillages de lampes - Partie 2-13: Exigences Geräte für Lampen - Teil 2-13: Besondere Anforderungen
particulières pour les appareillages électroniques alimentés an gleich- oder wechselstromversorgte elektronische
en courant continu ou alternatif pour les modules de LED Betriebsgeräte für LED-Module
(CEI 61347-2-13:2014) (IEC 61347-2-13:2014)
This European Standard was approved by CENELEC on 2014-10-08. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.



European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN 61347-2-13:2014 E

---------------------- Page: 3 ----------------------

SIST EN 61347-2-13:2014
EN 61347-2-13:2014 - 2 -

Foreword
The text of document 34C/1092/FDIS, future edition 2 of IEC 61347-2-13, prepared by SC 34C,
"Auxiliaries for lamps", of IEC TC 34, "Lamps and related equipment", was submitted to the IEC-
CENELEC parallel vote and approved by CENELEC as EN 61347-2-13:2014.
The following dates are fixed:
(dop) 2015-07-08
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2017-10-08
• latest date by which the national
standards conflicting with the
document have to be withdrawn

This document supersedes EN 61347-2-13:2006

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.

This standard covers the Principle Elements of the Safety Objectives for Electrical Equipment Designed
for Use within Certain Voltage Limits (LVD - 2006/95/EC).

Endorsement notice
The text of the International Standard IEC 61347-2-13:2014 was approved by CENELEC as a European
Standard without any modification.

In the official version, for Bibliography, the following notes have to be added for the standards indicated:

IEC 60051 Series NOTE Harmonised in EN 60051 Series.
IEC 60085:2004 NOTE Harmonised as EN 60085:2008.
IEC 60364-4-41:2005 NOTE Harmonised as HD 6
...