CLC/TS 61496-3:2008

Safety of machinery - Electro-sensitive protective equipment - Part 3: Particular requirements for Active Opto-electronic Protective Devices responsive to Diffuse Reflection (AOPDDR)

Specifies additional requirements for the design, construction and testing of electro-sensitive protective equipment (ESPE) for the safeguarding of machinery, employing active opto-electronic protective devices responsive to diffuse reflection (AOPDDRs) for the sensing function.

Sicherheit von Maschinen - Berührungslos wirkende Schutzeinrichtungen - Teil 3: Besondere Anforderungen an aktive optoelektronische diffuse Reflektion nutzende Schutzeinrichtungen (AOPDDR)

Sécurité des machines - Equipements de protection électro-sensibles - Partie 3: Exigences particulières pour les équipements utilisant des dispositifs protecteurs optoélectroniques actifs sensibles aux réflexions diffuses (AOPDDR)

Définit les prescriptions supplémentaires de conception, deconstruction et dessais déquipements de protection électro-sensibles (ESPE) pour la sécurité des machines, utilisant pour la fonction de détection des systèmes actifs optoélectroniques sensibles aux réflexions diffuses (AOPDDR).

Varnost strojev - Električno občutljiva zaščitna oprema - 3. del: Posebne zahteve za aktivne optoelektronske zaščitne elemente, ki se odzivajo na difuzni odboj (AOPDDR) (IEC 61496-3:2008)

General Information

• Status: Withdrawn
• Publication Date: 22-May-2008
• ICS: 13.110 - Safety of machinery
• ICS: 29.260 - Electrical equipment for working in special conditions
• ICS: 31.260 - Optoelectronics. Laser equipment
• Technical Committee: CLC/TC 44X - Safety of machinery: electrotchnical aspects
• Drafting Committee: IEC/TC 44 - IEC_TC_44
• Parallel Committee: IEC/TC 44 - IEC_TC_44
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 11-Jan-2022
• Completion Date: 11-Jan-2022
• Ref Project: SIST-TS CLC/TS 61496-3:2009 - Safety of machinery - Electro-sensitive protective equipment -- Part 3: Particular requirements for Active Opto-electronic Protective Devices responsive to Diffuse Reflection (AOPDDR)

Relations

• Replaces: CLC/TS 61496-3:2003 - Safety of machinery - Electro-sensitive protective equipment - Part 3: Particular requirements for Active Opto-electronic Protective Devices responsive to Diffuse Reflection (AOPDDR)
• Effective Date: 28-Jan-2023
• Replaced By: EN IEC 61496-3:2019 - Safety of machinery - Electro-sensitive protective equipment - Part 3: Particular requirements for active opto-electronic protective devices responsive to diffuse Reflection (AOPDDR)
• Effective Date: 23-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-TS CLC/TS 61496-3:2009
01-januar-2009
1DGRPHãþD
SIST-TS CLC/TS 61496-3:2005
9DUQRVWVWURMHY(OHNWULþQRREþXWOMLYD]DãþLWQDRSUHPDGHO3RVHEQH]DKWHYH
]DDNWLYQHRSWRHOHNWURQVNH]DãþLWQHHOHPHQWHNLVHRG]LYDMRQDGLIX]QLRGERM
$23''5,(&
Safety of machinery - Electro-sensitive protective equipment -- Part 3: Particular
requirements for Active Opto-electronic Protective Devices responsive to Diffuse
Reflection (AOPDDR)
Sicherheit von Maschinen - Berührungslos wirkende Schutzeinrichtungen -- Teil 3:
Besondere Anforderungen an aktive optoelektronische diffuse Reflektion nutzende
Schutzeinrichtungen (AOPDDR)
Sécurité des machines - Equipements de protection électro-sensibles -- Partie 3:
Exigences particulières pour les équipements utilisant des dispositifs protecteurs
optoélectroniques actifs sensibles aux réflexions diffuses (AOPDDR)
Ta slovenski standard je istoveten z: CLC/TS 61496-3:2008
ICS:
13.110 Varnost strojev Safety of machinery
31.260 Optoelektronika, laserska Optoelectronics. Laser
oprema equipment
SIST-TS CLC/TS 61496-3:2009 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST-TS CLC/TS 61496-3:2009

---------------------- Page: 2 ----------------------

SIST-TS CLC/TS 61496-3:2009

TECHNICAL SPECIFICATION
CLC/TS 61496-3

SPÉCIFICATION TECHNIQUE
May 2008
TECHNISCHE SPEZIFIKATION

ICS 13.110; 31.260 Supersedes CLC/TS 61496-3:2003


English version


Safety of machinery -
Electro-sensitive protective equipment -
Part 3: Particular requirements for Active Opto-electronic Protective
Devices responsive to Diffuse Reflection (AOPDDR)
(IEC 61496-3:2008)


Sécurité des machines -  Sicherheit von Maschinen -
Equipements de protection Berührungslos wirkende
électro-sensibles - Schutzeinrichtungen -
Partie 3: Exigences particulières pour les Teil 3: Besondere Anforderungen an
équipements utilisant des dispositifs aktive optoelektronische diffuse Reflektion
protecteurs optoélectroniques actifs nutzende Schutzeinrichtungen (AOPDDR)
sensibles aux réflexions diffuses (IEC 61496-3:2008)
(AOPDDR)
(CEI 61496-3:2008)





This Technical Specification was approved by CENELEC on 2008-03-01.

CENELEC members are required to announce the existence of this TS in the same way as for an EN and to
make the TS available promptly at national level in an appropriate form. It is permissible to keep conflicting
national standards in force.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.



CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2008 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. CLC/TS 61496-3:2008 E

---------------------- Page: 3 ----------------------

SIST-TS CLC/TS 61496-3:2009
CLC/TS 61496-3:2008 - 2 -
Foreword
The text of document 44/572/FDIS, future edition 2 of IEC 61496-3, prepared by IEC TC 44, Safety of
machinery - Electrotechnical aspects, in collaboration with the Technical Committee CENELEC TC 44X,
Safety of machinery: electrotechnical aspects, was submitted to the IEC-CENELEC parallel vote and was
approved by CENELEC as CLC/TS 61496-3 on 2008-03-01.
This Technical Specification supersedes CLC/TS 61496-3:2003.
The most important changes and improvements compared to CLC/TS 61496-3:2003 are:
– extension of the range of detection capability covered by this part of the standard from 50 mm to
100 mm to the range of 30 mm to 200 mm;
– clarification of requirements for the selection of multiple detection zones (Clause A.10);
– more detailed information about the use of an AOPDDR as a whole body trip device by extension of
Clause A.12 and a new Clause A.13;
– improved description of the relationship between ranging accuracy and probability of detection
(Annex BB).
This Technical Specification is to be used in conjunction with EN 61496-1.
The following date was fixed:
– latest date by which the existence of the CLC/TS
has to be announced at national level (doa) 2008-06-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61496-3:2008 was approved by CENELEC as a Technical
Specification without any modification.
In the official version, for Bibliography, the following note has to be added for the standard i
...