EN IEC 62769-6-100:2023

Field Device Integration (FDI®) - Part 6-100: Technology Mapping - .Net

IEC 62769-6-100:2023 specifies the technology mapping for the concepts described in the Field Device Integration (FDI®[1]) standard. The technology mapping focuses on implementation regarding the components FDI® Client and User Interface Plug-in (UIP) using the Runtime .NET. This runtime is specific only to the WORKSTATION platform as defined in IEC 62769‑4. [1] FDI is a registered trademark of the non-profit organization Fieldbus Foundation, Inc. This information is given for the convenience of users of this document and does not constitute an endorsement by IEC of the trademark holder or any of its products. Compliance does not require use of the trade name. Use of the trade name requires permission of the trade name holder.

Feldgeräteintegration (FDI®) - Teil 6-100: FDI-Technologieabbildungen - .Net

Intégration des appareils de terrain (FDI®) - Partie 6-100: Mapping de technologies - .Net

L'IEC 62769-6-100:2023 spécifie le mapping de technologies pour les concepts décrits dans la norme d'intégration des appareils de terrain (FDI®[1], Field Device Integration). Le mapping de technologies porte essentiellement sur la mise en œuvre des composants Client FDI® et Plugiciel d'interface utilisateur (UIP, User Interface Plug-in) à l'aide de l'environnement d'exécution .NET. Cet environnement d'exécution n'est spécifique qu'à la plateforme WORKSTATION définie dans l'IEC 62769‑4. [1] FDI est une marque déposée de l’organisation à but non lucratif Fieldbus Foundation, Inc. Cette information est donnée à l'intention des utilisateurs du présent document et ne signifie nullement que l'IEC approuve le détenteur de la marque ou l'emploi de ses produits. La conformité n'exige pas l'utilisation de la marque. L'utilisation de la marque exige l'autorisation du détenteur de la marque.

Integracija procesne naprave (FDI®) - 6-100. del: Preslikava tehnologije - .Mreža (IEC 62769-6-100:2023)

Standard IEC 62769-6-100:2023 določa preslikavo tehnologije za koncepte, opisane v standardu za integracijo procesne naprave (FDI®[1]). Preslikava tehnologije se osredotoča na izvajanje v zvezi z odjemalcem FDI® in vtičnikom uporabniškega vmesnika (UIP), ki uporabljata čas izvajanja .NET. Ta čas izvajanja je specifičen samo za platformo DELOVNE POSTAJE, kot je opredeljeno v standardu IEC 62769-4.

General Information

• Status: Published
• Publication Date: 01-Jun-2023
• ICS: 25.040.40 - Industrial process measurement and control
• ICS: 35.100.05 - Multilayer applications
• Technical Committee: CLC/TC 65X - Industrial-process measurement, control and automation
• Drafting Committee: IEC/SC 65E - IEC_SC_65E
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 02-Jun-2023
• Due Date: 28-Oct-2022
• Completion Date: 02-Jun-2023
• Ref Project: SIST EN IEC 62769-6-100:2023 - Field Device Integration (FDI®) - Part 6-100: Technology Mapping - .Net (IEC 62769-6-100:2023)

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 62769-6-100:2023
01-november-2023
Integracija procesne naprave (FDI®) - 6-100. del: Preslikava tehnologije - .Mreža
(IEC 62769-6-100:2023)
Field Device Integration (FDI®) - Part 6-100: Technology Mapping - .Net (IEC 62769-6-
100:2023)
Feldgeräteintegration (FDI®) - Teil 6-100: FDI-Technologieabbildungen - .Net (IEC
62769-6-100:2023)
Intégration des appareils de terrain (FDI®) - Partie 6-100: Mapping de technologies -
.Net (IEC 62769-6-100:2023)
Ta slovenski standard je istoveten z: EN IEC 62769-6-100:2023
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.240.50 Uporabniške rešitve IT v IT applications in industry
industriji
SIST EN IEC 62769-6-100:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 62769-6-100:2023

---------------------- Page: 2 ----------------------
SIST EN IEC 62769-6-100:2023


EUROPEAN STANDARD EN IEC 62769-6-100

NORME EUROPÉENNE

EUROPÄISCHE NORM June 2023
ICS 25.040.40; 35.100.05

English Version
Field Device Integration (FDI®) - Part 6-100: Technology
Mapping - .Net
(IEC 62769-6-100:2023)
Intégration des appareils de terrain (FDI®) - Partie 6-100: Feldgeräteintegration (FDI®) - Teil 6-100: FDI-
Mapping de technologies - .Net Technologieabbildungen - .Net
(IEC 62769-6-100:2023) (IEC 62769-6-100:2023)
This European Standard was approved by CENELEC on 2023-05-19. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 62769-6-100:2023 E

---------------------- Page: 3 ----------------------
SIST EN IEC 62769-6-100:2023
EN IEC 62769-6-100:2023 (E)
European foreword
The text of document 65E/868/CDV, future edition 1 of IEC 62769-6-100, prepared by SC 65E
"Devices and integration in enterprise systems" of IEC/TC 65 "Industrial-process measurement,
control and automation" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN IEC 62769-6-100:2023.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2024-02-19
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2026-05-19
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 62769-6-100:2023 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 61804 (series) NOTE Approved as EN IEC 61804 (series)
2

---------------------- Page: 4 ----------------------
SIST EN IEC 62769-6-100:2023
EN IEC 62769-6-100:2023 (E)
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest editio
...