iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN IEC 62506:2023

(Main)

Methods for product accelerated testing

Methods for product accelerated testing

IEC 62506:2023 provides guidance on the application of various accelerated test techniques for measurement or improvement of item reliability. Identification of potential failure modes that can be experienced in the use of an item and their mitigation is instrumental to ensure dependability of an item. The object of the methods is to either identify potential design weakness or provide information on item reliability, or to achieve necessary reliability and availability improvement, all within a compressed or accelerated period of time. This document addresses accelerated testing of non-repairable and repairable systems. It can be used for probability ratio sequential tests, fixed duration tests and reliability improvement/growth tests, where the measure of reliability can differ from the standard probability of failure occurrence. This document also extends to present accelerated testing or production screening methods that would identify weakness introduced into the item by manufacturing error, which can compromise item reliability. Services and people are however not covered by this document.

Verfahren für beschleunigte Produktprüfungen

Méthodes d'essais accélérés de produits

L'IEC 62506:2023 fournit des recommandations pour l’application de diverses techniques d’essais accélérés permettant de mesurer ou d’améliorer la fiabilité de l’entité. L’identification des modes de défaillance potentiels qui peuvent être rencontrés lors de l’utilisation d’une entité donnée et la manière d’y remédier contribuent à assurer la sûreté de fonctionnement d’une entité. L’objectif de ces méthodes est soit d’identifier les faiblesses potentielles de la conception et fournir des informations sur la fiabilité de l’entité, soit d’atteindre l’amélioration nécessaire de la fiabilité et de la disponibilité, dans les deux cas en comprimant ou en accélérant la durée. Le présent document couvre les essais accélérés de systèmes non réparables et de systèmes réparables. Elle peut être utilisée pour des essais de rapport de probabilité progressifs, des essais à durée fixe et des essais d’amélioration/croissance de la fiabilité, lorsque la mesure de la fiabilité peut être différente de la probabilité normale d’occurrence de défaillance. Le présent document décrit également des méthodes d’essais accélérés ou de déverminage de la production qui permettraient d’identifier les faiblesses induites par une éventuelle erreur de fabrication de l’entité et qui peuvent de ce fait d’en compromettre la fiabilité. Les services et les personnes ne sont cependant pas couverts par le présent document.

Metode za pospešeno preskušanje proizvodov (IEC 62506:2023)

General Information

Status
Published
Publication Date
14-Dec-2023
ICS
03.120.01 - Quality in general
21.020 - Characteristics and design of machines, apparatus, equipment
Technical Committee
CLC/SR 56 - Dependability
Drafting Committee
IEC/TC 56 - IEC_TC_56
Current Stage
6060 - Document made available - Publishing
Start Date
15-Dec-2023
Completion Date
15-Dec-2023
Ref Project
SIST EN IEC 62506:2024 - Methods for product accelerated testing (IEC 62506:2023)

Relations

Replaces
EN 62506:2013 - Methods for product accelerated testing
Effective Date
04-Jun-2020

Buy Standard

EN IEC 62506:2024 - BARVEEN IEC 62506:2024 - BARVE
PreviousNext
Standard
EN IEC 62506:2024 - BARVE
English language
94 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 62506:2024
01-februar-2024
Metode za pospešeno preskušanje proizvodov (IEC 62506:2023)
Methods for product accelerated testing (IEC 62506:2023)
Verfahren für beschleunigte Produktprüfungen (IEC 62506:2023)
Méthodes d'essais accélérés de produits (IEC 62506:2023)
Ta slovenski standard je istoveten z: EN IEC 62506:2023
ICS:
03.120.01 Kakovost na splošno Quality in general
19.020 Preskuševalni pogoji in Test conditions and
postopki na splošno procedures in general
21.020 Značilnosti in načrtovanje Characteristics and design of
strojev, aparatov, opreme machines, apparatus,
equipment
SIST EN IEC 62506:2024 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 62506:2024

---------------------- Page: 2 ----------------------
SIST EN IEC 62506:2024


EUROPEAN STANDARD EN IEC 62506

NORME EUROPÉENNE

EUROPÄISCHE NORM December 2023
ICS 03.120.01; 21.020 Supersedes EN 62506:2013
English Version
Methods for product accelerated testing
(IEC 62506:2023)
Méthodes d'essais accélérés de produits Verfahren für beschleunigte Produktprüfungen
(IEC 62506:2023) (IEC 62506:2023)
This European Standard was approved by CENELEC on 2023-12-12. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 62506:2023 E

---------------------- Page: 3 ----------------------
SIST EN IEC 62506:2024
EN IEC 62506:2023 (E)
European foreword
The text of document 56/2000/FDIS, future edition 2 of IEC 62506, prepared by IEC/TC 56
"Dependability" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
EN IEC 62506:2023.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2024-09-12
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2026-12-12
document have to be withdrawn

This document supersedes EN 62506:2013 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 62506:2023 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standard indicated:
IEC 62740:2015 NOTE Approved as EN 62740:2015 (not modified)
IEC 60812 NOTE Approved as EN IEC 60812
IEC 61163-2 NOTE Approved as EN IEC 61163-2
IEC 60300-3-4 NOTE Approved as EN IEC 60300-3-4
IEC 60068 (series) NOTE Approved as EN 60068 (series)
IEC 61014 NOTE Approved as EN 61014
IEC 61163-1 NOTE Approved as EN 61163-1
IEC 61164:2004 NOTE Approved as EN 61164:2004 (not modified)
IEC 61125:2018 NOTE Approved as EN IEC 61125:2018 (not modified)
2

---------------------- Page: 4 ----------------------
SIST EN IEC 62506:2024
EN IEC 62506:2023 (E)
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this docu
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN IEC 61123:2020(Main)
Reliability testing - Compliance test plans for success ratio
SIST EN IEC 61123:2020

IEC 61123:2019 is intended to define a procedure to verify if a reliability of an item/system complies with the stated requirements. The requirement is assumed to be specified as the percentage of success (success ratio) or the percentage of failures (failure ratio). This document can be used where a number of items are tested (number of trials performed) and classified as passed or failed. It can also be used where one or a number of items are tested repeatedly. The procedures are based on the assumption that the probability of success or failure is the same from trial to trial (statistically independent events). Plans for fixed trial/failure terminated tests as well as truncated sequential probability ratio tests (SPRTs) are included. This document contains extensive tables with ready-to-use SPRT plans and their characteristics for equal and non-equal risks for supplier and customer. In the case of the reliability compliance tests for constant failure rate/intensity, IEC 61124 applies. This second edition cancels and replaces the first edition published in 1991. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: The sequential probability ratio test (SPRT) [1, 2][1] has been significantly developed in recent years [3, 4, 5]. This edition contains shorter and accurate tests, a wide range of test plans, and significant additional characteristic data, as follows: the tests are significantly truncated (the maximum trial numbers are low) without substantially increasing the expected number of trials to decision (ENT); the true producer’s and consumer’s risks (α', β') are given and very close to the nominal (α, β); the range of the test parameters is wide (failure ratio, risks and discrimination ratio); the test plans include various risk ratios (not restricted to equal risks only); the values of ENT are accurate and given in the relevant region (for practical use); guidelines for extension of the test sets (interpolation and extrapolation) are included. In Annex C, the use of the cumulative binomial distribution function of Excel that simplifies the procedure of designing has been added (Clause C.3). Keywords: verify if a reliability of an item/system complies with the stated requirements

  • Standard
    52 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60812:2018(Main)
Failure modes and effects analysis (FMEA and FMECA)
SIST EN IEC 60812:2018

IEC 60812:2018 explains how failure modes and effects analysis (FMEA), including the failure modes, effects and criticality analysis (FMECA) variant, is planned, performed, documented and maintained. The purpose of failure modes and effects analysis (FMEA) is to establish how items or processes might fail to perform their function so that any required treatments could be identified. An FMEA provides a systematic method for identifying modes of failure together with their effects on the item or process, both locally and globally. It may also include identifying the causes of failure modes. Failure modes can be prioritized to support decisions about treatment. Where the ranking of criticality involves at least the severity of consequences, and often other measures of importance, the analysis is known as failure modes, effects and criticality analysis (FMECA). This document is applicable to hardware, software, processes including human action, and their interfaces, in any combination. An FMEA can be used in a safety analysis, for regulatory and other purposes, but this being a generic standard, does not give specific guidance for safety applications. This third edition cancels and replaces the second edition published in 2006. This edition constitutes a technical revision.This edition includes the following significant technical changes with respect to the previous edition: a) the normative text is generic and covers all applications; b) examples of applications for safety, automotive, software and (service) processes have been added as informative annexes; c) tailoring the FMEA for different applications is described; d) different reporting formats are described, including a database information system; e) alternative means of calculating risk priority numbers (RPN) have been added; f) a criticality matrix based method has been added; g) the relationship to other dependability analysis methods have been described. Keywords: failure modes and effects analysis (FMEA), failure modes effects and criticality analysis (FMECA)

  • Standard
    80 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62853:2018(Main)
Open systems dependability
SIST EN IEC 62853:2018

IEC 62853:2018 provides guidance in relation to a set of requirements placed upon system life cycles in order for an open system to achieve open systems dependability. This document elaborates on IEC 60300-1 by providing details of the changes needed to accommodate the characteristics of open systems. It defines process views based on ISO/IEC/IEEE 15288:2015, which identifies the set of system life cycle processes. This document is applicable to life cycles of products, systems, processes or services involving hardware, software and human aspects or any integrated combinations of these elements. For open systems, security is especially important since the systems are particularly exposed to attack. This document can be used to improve the dependability of open systems and to provide assurance that the process views specific to open systems achieve their expected outcomes. It helps an organization define the activities and tasks that need to be undertaken to achieve dependability objectives in an open system, including dependability related communication, dependability assessment and evaluation of dependability throughout system life cycles. Keywords: dependability of open systems

  • Standard
    74 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 62550:2017(Main)
Spare parts provisioning
SIST EN 62550:2017

IEC 62550:2017 describes requirements for spare parts provisioning as a part of supportability activities that affect dependability performance so that continuity of operation of products, equipment and systems for their intended application can be sustained. This document is intended for use by a wide range of suppliers, maintenance support organizations and users and can be applied to all items.
Keywords: necessary spare parts

  • Standard
    56 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 62741:2015(Main)
Demonstration of dependability requirements - The dependability case
SIST EN 62741:2015

IEC 62741:2015 gives guidance on the content and application of a dependability case and establishes general principles for the preparation of a dependability case. This standard is written in a basic project context where a customer orders a system that meets dependability requirements from a supplier and then manages the system until its retirement. The methods provided in this standard may be modified and adapted to other situations as needed. The dependability case is normally produced by the customer and supplier but can also be used and updated by other organizations. For example, certification bodies and regulators may examine the submitted case to support their decisions and users of the system may update/expand the case, particularly where they use the system for a different purpose. Keywords: dependability, reliability, availability, maintainability, supportability, usability, testability, durability.

  • Standard
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    48 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60300-1:2014(Main)
Dependability management - Part 1: Guidance for management and application
SIST EN 60300-1:2014

IEC 60300-1:2014 establishes a framework for dependability management. It provides guidance on dependability management of products, systems, processes or services involving hardware, software and human aspects or any integrated combinations of these elements. It presents guidance on planning and implementation of dependability activities and technical processes throughout the life cycle taking into account other requirements such as those relating to safety and the environment. This standard gives guidelines for management and their technical personnel to assist them to optimize dependability. This third edition cancels and replaces the second edition published in 2003 and constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - an updating of definitions to reflect IEC 60050-191:2014; - an enhanced description of dependability and its attributes; - a more generic approach to dependability management; - revised guidelines for application of dependability management; - a more generic approach to the life cycle; - a framework for dependability standards. Keywords: dependability management

  • Standard
    45 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 62506:2013(Main)
Methods for product accelerated testing
SIST EN 62506:2014

IEC 62506:2013 provides guidance on the application of various accelerated test techniques for measurement or improvement of product reliability. Identification of potential failure modes that could be experienced in the use of a product/item and their mitigation is instrumental to ensure dependability of an item. The object of the methods is to either identify potential design weakness or provide information on item dependability, or to achieve necessary reliability/availability improvement, all within a compressed or accelerated period of time. This standard addresses accelerated testing of non-repairable and repairable systems. It can be used for probability ratio sequential tests, fixed duration tests and reliability improvement/growth tests, where the measure of reliability may differ from the standard probability of failure occurrence. This standard also extends to present accelerated testing or production screening methods that would identify weakness introduced into the product by manufacturing error, which could compromise product dependability. Keywords: test techniques for measurement or improvement of product reliability

  • Standard
    91 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60706-5:2007(Main)
Maintainability of equipment - Part 5: Testability and diagnostic testing
SIST EN 60706-5:2008

This guide has for purpose to provide guidance for the early consideration of testability aspects in design and development, and to assist in determining effective test procedures as an integral part of operation and maintenance. This second edition constitutes a technical revision. It expands and provides more detail on the techniques and systems broadly outlined in the first edition.

  • Standard
    66 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61163-1:2006(Main)
Reliability stress screening - Part 1: Repairable assemblies manufactured in lots
SIST EN 61163-1:2008

This part of IEC 61163 describes particular methods to apply and optimize reliability stress screening processes for lots of repairable hardware assemblies, in cases where the assemblies have an unacceptably low reliability in the early failure period, and when other methods, such as reliability growth programmes and quality control techniques, are not applicable.

  • Standard
    84 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61165:2006(Main)
Application of Markov techniques
SIST EN 61165:2007

This International Standard provides guidance on the application of Markov techniques to model and analyze a system and estimate reliability, availability, maintainability and safety measures. This standard is applicable to all industries where systems, which exhibit state-dependent behaviour, have to be analyzed. The Markov techniques covered by this standard assume constant time-independent state transition rates. Such techniques are often called homogeneous Markov techniques.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day