EN IEC 62149-4:2023

Fibre optic active components and devices - Performance standards - Part 4: 1 300 nm fibre optic transceivers for Gigabit Ethernet application

IEC 62149-4:2022 is available as IEC 62149-4:2022 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 62149-4:2022 defines performance specifications for 1 300 nm fibre optic transceiver modules used for the ISO/IEC/IEEE 8802-3 Gigabit Ethernet application. This document contains definitions for product performance requirements as well as a series of tests and measurements, for which clearly defined conditions, severities and pass/fail criteria are provided. The tests are intended to be run on a "once-off" basis to prove any product’s ability to satisfy the performance standard’s requirements. A product that has been shown to meet all the requirements of a performance standard can be declared as complying with the performance standard but will then be controlled by a quality assurance/quality conformance program. This third edition cancels and replaces the second edition published in 2010. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - the normative references are updated; - the condition "for short periods" in 4.1 is removed; - the absolute limiting rating for soldering temperature in Table 1 is modified; - the maximal optical output power (multimode fibre) in Table 4 is increased from −3,5 dBm to −3 dBm, to align value with the referenced document; - a note is added to Table 7 to clarify that out-of-specification products are not allowed to pass the performance tests.

Aktive Lichtwellenleiterbauelemente und -geräte - Betriebsverhalten - Teil 4: 1 300-nm-Lichtwellenleiter-Sende- und Empfangsmodule für Gigabit-Ethernet-Anwendungen

Composants et dispositifs actifs fibroniques - Normes de performance - Partie 4: Émetteurs-récepteurs fibroniques de 1 300 nm pour application Gigabit Ethernet

IEC 62149-4:2022 est disponible sous forme de IEC 62149-4:2022 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.L'IEC 62149-4:2022 définit les spécifications de performance pour les modules d'émetteur-récepteur fibroniques de 1 300 nm utilisés pour l'application Gigabit Ethernet de l’ISO/IEC/IEEE 8802-3. Ce document contient des définitions des exigences de performance de produit ainsi qu'une série d'essais et de mesures, pour lesquels des conditions, sévérités et critères de réussite/d’échec clairement définis sont fournis. Chaque essai est destiné à être effectué une seule fois pour prouver la capacité des produits à satisfaire aux exigences des normes de performance. Un produit dont la conformité à toutes les exigences d’une norme de performance a été démontrée peut être déclaré conforme à la norme de performance, mais il sera ensuite contrôlé selon un programme d’assurance de la qualité/de conformité de la qualité. Cette troisième édition annule et remplace la deuxième édition parue en 2010. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: - mise à jour des références normatives; - suppression de la condition "pour de courtes périodes" au 4.1; - modification des valeurs limites absolues pour la température de brasage au Tableau 1; - augmentation de la puissance de sortie optique maximale (fibre multimodale) du Tableau 4, de −3,5 dBm à −3 dBm, afin d’aligner la valeur par rapport au document de référence; - ajout d’une note au Tableau 7, pour clarifier le fait que les produits non conformes à la spécification ne sont pas autorisés à réussir les essais de performance.

Aktivne komponente in naprave optičnih vlaken - Izvedbeni standardi - 4. del: 1300 nm oddajnikov in sprejemnikov optičnih vlaken za Gigabit Ethernet uporabo (IEC 62149-4:2022)

Standard IEC 62149-4:2022 je na voljo kot IEC 62149-4:2022, ki vsebuje mednarodni standard in njegovo različico z revizijami, ki prikazujejo vse spremembe tehnične vsebine v primerjavi s prejšnjo izdajo. Standard IEC 62149-4:2022 opredeljuje specifikacije zmogljivosti za 1300 nm optične module za oddajnike-sprejemnike vlaken, ki se uporabljajo za uporabo Gigabit Ethernet po standardu ISO/IEC/IEEE 8802-3. Ta dokument vsebuje opredelitve zahtev glede učinkovitosti izdelka ter vrsto preskusov in meritev, za katere so jasno opredeljeni pogoji, zahtevnost in merila za uspešno/neuspešno opravljen preskus. Preskusi so namenjeni enkratnemu izvajanju, z njimi pa se dokaže, ali lahko izdelek izpolnjuje zahteve tehničnega standarda. Izdelek, ki dokazano izpolnjuje vse zahteve izvedbenega standarda, je mogoče šteti za skladen z izvedbenim standardom, vendar ga bo v tem primeru nadzoroval program za zagotavljanje skladnosti/skladnost s kakovostjo. Tretja izdaja razveljavlja in nadomešča drugo izdajo, objavljeno leta 2010. Ta izdaja je tehnično popravljena izdaja. Ta izdaja v primerjavi s prejšnjo vključuje naslednje pomembne tehnične spremembe:
– posodobljene zveze s standardi;
– v 4.1 se črta pogoj "za krajša obdobja";
– spremeni se absolutna mejna vrednost za temperaturo mehkega spajkanja v preglednici 1;
– največja izhodna optična moč (večrodna vlakna) v preglednici 4 se poveča s -3,5 dBm na -3 dBm, da se vrednost uskladi s sklicevanim dokumentom;
– v preglednico 7 se doda opomba, ki pojasnjuje, da izdelki, ki ne ustrezajo specifikacijam, ne smejo uspešno opraviti preskusov učinkovitosti.

General Information

• Status: Published
• Publication Date: 02-Feb-2023
• ICS: 33.180.20 - Fibre optic interconnecting devices
• Technical Committee: CLC/SR 86C - Fibre optic systems and active devices
• Drafting Committee: IEC/SC 86C - IEC_SC_86C
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 03-Feb-2023
• Due Date: 28-Feb-2023
• Completion Date: 03-Feb-2023
• Ref Project: SIST EN IEC 62149-4:2023 - Fibre optic active components and devices - Performance standards - Part 4: 1 300 nm fibre optic transceivers for Gigabit Ethernet application (IEC 62149-4:2022)

Relations

• Replaces: EN 62149-4:2010 - Fibre optic active components and devices - Performance standards - Part 4: 1 300 nm fibre optic transceivers for Gigabit Ethernet application
• Effective Date: 26-Jan-2023
• Amended By: EN IEC 62149-4:2023/prA1:2024 - Amendment 1 - Fibre optic active components and devices - Performance standards - Part 4: 1 300 nm fibre optic transceivers for Gigabit Ethernet application
• Effective Date: 18-Jun-2024

Standards Content (Sample)

SLOVENSKI STANDARD
01-april-2023
Aktivne komponente in naprave optičnih vlaken - Izvedbeni standardi - 4. del: 1300
nm oddajnikov in sprejemnikov optičnih vlaken za Gigabit Ethernet uporabo (IEC
62149-4:2022)
Fibre optic active components and devices - Performance standards - Part 4: 1 300 nm
fibre optic transceivers for Gigabit Ethernet application (IEC 62149-4:2022)
Aktive Lichtwellenleiterbauelemente und -geräte - Betriebsverhalten - Teil 4: 1 300-nm-
Lichtwellenleiter-Sende- und Empfangsmodule für Gigabit-Ethernet-Anwendungen (IEC
62149-4:2022)
Composants et dispositifs actifs fibroniques - Normes de performance - Partie 4:
Emetteurs-récepteurs fibroniques de 1 300 nm pour application Gigabit Ethernet (IEC
62149-4:2022)
Ta slovenski standard je istoveten z: EN IEC 62149-4:2023
ICS:
33.180.20 Povezovalne naprave za Fibre optic interconnecting
optična vlakna devices
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 62149-4

NORME EUROPÉENNE
EUROPÄISCHE NORM February 2023
ICS 33.180.20 Supersedes EN 62149-4:2010
English Version
Fibre optic active components and devices - Performance
standards - Part 4: 1 300 nm fibre optic transceivers for Gigabit
Ethernet application
(IEC 62149-4:2022)
Composants et dispositifs actifs fibroniques - Normes de Aktive Lichtwellenleiterbauelemente und -geräte -
performance - Partie 4: Émetteurs-récepteurs fibroniques Betriebsverhalten - Teil 4: 1 300-nm-Lichtwellenleiter-
de 1 300 nm pour application Gigabit Ethernet Sende- und Empfangsmodule für Gigabit-Ethernet-
(IEC 62149-4:2022) Anwendungen
(IEC 62149-4:2022)
This European Standard was approved by CENELEC on 2023-01-20. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62149-4:2023 E

European foreword
The text of document 86C/1800/CDV, future edition 3 of IEC 62149-4, prepared by SC 86C "Fibre
optic systems and active devices" of IEC/TC 86 "Fibre optics" was submitted to the IEC-CENELEC
parallel vote and approved by CENELEC as EN IEC 62149-4:2023.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2023-10-20
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2026-01-20
document have to be withdrawn
This document supersedes EN 62149-4:2010 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 62149-4:2022 was approved by CENELEC as a European
Standard without any modification.
Annex A
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the
relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60068-2-6 - Environmental testing - Part 2-6: Tests - EN 60068-2-6 -
Test Fc: Vibration (sinusoidal)
IEC 60068-2-20 - Environmental testing - Part 2-20: Tests - EN IEC 60068-2-20 -
Test Ta and Tb: Test methods for
solderability and resistance to soldering
heat of devices with leads
IEC 60068-2-27 - Environmental testing - Part 2-27: Tests - EN 60068-2-27 -
Test Ea and guidance: Shock
IEC 60068-2-38 - Environmental testing - Part 2-38: Tests - EN IEC 60068-2-38 -
Test Z/AD: Composite
temperature/humidity cyclic test
IEC 60068-2-78 - Environmental testing - Part 2-78: Tests - EN 60068-2-78 -
Test Cab: Damp heat, steady state
IEC 60749-25 - Semiconductor devices - Mechanical and EN 60749-25 -
climatic test methods - Part 25:
Temperature cycling
IEC 60749-26 - Semiconductor devices - Mechanical and EN IEC 60749-26 -
climatic test methods - Part 26:
Electrostatic discharge (ESD) sensitivity
testing - Human body model (HBM)
IEC 60825-1 - Safety of laser products - Part 1: EN 60825-1 -
Equipment classification and requirements
IEC 60938-1 - Fixed inductors for electromagnetic EN IEC 60938-1 -
interference suppression - Part 1: Generic
specification
IEC 60950-1 - Information technology equipment - Safety - -
- Part 1: General requirements
IEC 61300-2-47 - Fibre optic interconnecting devices and EN 61300-2-47 -
passive components - Basic test and
measurement procedures - Part 2-47:
Tests - Thermal shocks
ISO/IEC/IEEE 8802-3 2021 Telecommunications and exchange - -
between information technology systems -
Requirements for local and metropolitan
area networks - Part 3: Standard for
Ethernet
IEC 62149-4 ®
Edition 3.0 2022-12
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Fibre optic active components and devices – Performance standards –

Part 4: 1 300 nm fibre optic transceivers for Gigabit Ethernet application

Composants et dispositifs actifs fibroniques – Normes de performance –

Partie 4: Émetteurs-récepteurs fibroniques de 1 300 nm pour application Gigabit

Ethernet
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 33.180.20 ISBN 978-2-8322-6226-9

– 2 – IEC 62149-4:2022 © IEC 2022
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms, definitions, symbols and abbreviated terms . 7
3.1 Terms and definitions . 7
3.2 Symbols . 7
3.3 Abbreviated terms . 8
4 Product parameters . 8
4.1 Absolute limiting ratings . 8
4.2 Operating environment . 9
4.3 Functional specification. 9
4.4 Diagrams . 10
4.5 Labelling . 11
5 Testing . 11
5.1 General . 11
5.2 Characterization testing . 11
5.3 Performance testing . 12
5.3.1 Sequence of testing . 12
5.3.2 Sample size, sequencing and groupings . 12
6 Environmental specifications . 14
6.1 General safety . 14
6.2 Laser safety . 14
6.3 Electromagnetic emission . 14
Annex A (normative) Sample size, sequencing and grouping requirements . 15

Figure 1 – Receiver section schematic . 10
Figure 2 – Transmitter section schematic . 11

Table 1 – Absolute limiting ratings . 8
Table 2 – Operating environment . 9
Table 3 – Receiver section: functional specification . 9
Table 4 – Transmitter section: functional specification . 10
Table 5 – Transmitter section characterization tests. 12
Table 6 – Receiver section characterization tests . 12
Table 7 – Performance test plan . 13
Table A.1 – Sample size, sequencing and grouping requirements . 15

IEC 62149-4:2022 © IEC 2022 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES –
PERFORMANCE STANDARDS –
Part 4: 1 300 nm fibre optic transceivers
for Gigabit Ethernet application

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as "IEC Publication(s)"). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees underta
...