iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN 50290-2-22:2001

(Main)

Communication cables - Part 2-22: Common design rules and construction - PVC sheathing compounds

Communication cables - Part 2-22: Common design rules and construction - PVC sheathing compounds

This Part 2-22 of EN 50290 gives specific requirements for PVC sheathing compounds used for communication cables. For cables with a maximum rated temperature of 90 °C, compound of Grade TM53 shall be used and it shall comply with the requirements described in Table 1. For oil resistant PVC cables, sheathing compound Grade TM54 or TM55 chosen according to the environmental conditions shall be used and it shall comply with the requirements described in Table 1. It is to be read in conjunction with Part 2-20 of EN 50290.

Kommunikationskabel - Teil 2-22: Gemeinsame Regeln für Entwicklung und Konstruktion - PVC-Mantelmischungen

Dieser Teil 2-22 der EN 50290 legt gemeinsame Anforderungen für PVC-Mantelmischungen, die in Kommunikationskabeln verwendet werden, fest. Für Kabel mit einer höchsten Bemessungstemperatur von 90° C muss der Mischungstyp TM53 verwendet werden. Er muss mit den in Tabelle 1 beschriebenen Anforderungen übereinstimmen. Für ölbeständige PVC-Kabel sind die Mantelmischungstypen TM54 oder TM55 entsprechend den Umgebungsbedingungen zu verwenden. Sie müssen mit den in Tabelle 1 beschriebenen Anforderungen übereinstimmen. Er ist zussammen mit Teil 2-20 der EN 50290 anzuwenden.

Câbles de communication - Partie 2-22: Règles de conception communes et de construction - Mélanges en PVC pour gainage

La présente partie 2-22 de la Norme européenne EN 50290 donne les prescriptions spécifiques pour les mélanges en PVC pour gainage utilisés dans les câbles de communication. Pour les câbles ayant une température nominale maximale de 90 °C, un composé de Grade TM53 doit être utilisé et doit satisfaire aux exigences décrites dans la Tableau 1. Pour les câbles PVC résistant aux huiles, des composés de gainage de Grade TM54 ou TM55 sélectionnés selon les conditions environnementales doivent être utilisés, et doivent satisfaire aux exigences décrites dans le Tableau 1. Elle doit être lue avec la partie 2-20 de la EN 50290.

Komunikacijski kabli – 2-22. del: Skupna pravila za načrtovanje in konstrukcija – PVC zmesi za oplaščenje

General Information

Status
Published
Publication Date
04-Oct-2001
ICS
29.035.20 - Plastics and rubber insulating materials
33.120.10 - Coaxial cables. Waveguides
Technical Committee
CLC/TC 46X - Communication cables
Drafting Committee
IEC/TC 46 - IEC_TC_46
Parallel Committee
IEC/TC 46 - IEC_TC_46
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
30-Nov-2022
Directive
2006/95/EC - Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits (codified version)
2014/35/EU - Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits
2014/53/EU - Directive 2014/53/EU of The European Parliament and of the Council of 16 April 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC
Mandate
M/212 - ICT - metallic and optical cables and cabling systems
Ref Project
SIST EN 50290-2-22:2002 - Communication cables -- Part 2-22: Common design rules and construction - PVC sheathing compounds

Relations

Replaces
HD 624.2 S1:1994 - Materials used in communication cables - Part 2: PVC sheathing compounds
Effective Date
28-Jan-2023
Amended By
EN 50290-2-22:2001/A1:2007 - Communication cables - Part 2-22: Common design rules and construction - PVC sheathing compounds
Effective Date
28-Jan-2023

Buy Standard

EN 50290-2-22:2002EN 50290-2-22:2002
PreviousNext
Standard
EN 50290-2-22:2002
English language
5 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-september-2002
1DGRPHãþD
SIST HD 624.2 S1:1996
.RPXQLNDFLMVNLNDEOL±GHO6NXSQDSUDYLOD]DQDþUWRYDQMHLQNRQVWUXNFLMD±
39&]PHVL]DRSODãþHQMH
Communication cables -- Part 2-22: Common design rules and construction - PVC
sheathing compounds
Kommunikationskabel -- Teil 2-22: Gemeinsame Regeln für Entwicklung und
Konstruktion - PVC-Mantelmischungen
Câbles de communication -- Partie 2-22: Règles de conception communes et de
construction - Mélanges en PVC pour gainage
Ta slovenski standard je istoveten z: EN 50290-2-22:2001
ICS:
29.035.20 3ODVWLþQLLQJXPHQLL]RODFLMVNL Plastics and rubber insulating
PDWHULDOL materials
33.120.10 Koaksialni kabli. Valovodi Coaxial cables. Waveguides
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 50290-2-22
NORME EUROPÉENNE
EUROPÄISCHE NORM October 2001
ICS 29.035.20; 33.120.10 Supersedes HD 624.2 S1:1994
English version
Communication cables
Part 2-22: Common design rules and construction -
PVC sheathing compounds
Câbles de communication Kommunikationskabel
Partie 2-22: Règles de conception Teil 2-22: Gemeinsame Regeln für
communes et de construction - Entwicklung und Konstruktion -
Mélanges en PVC pour gainage PVC-Mantelmischungen
This European Standard was approved by CENELEC on 2001-05-01. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any
other language made by translation under the responsibility of a CENELEC member into its own
language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands,
Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2001 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 50290-2-22:2001 E
Foreword
This European Standard was prepared by a joint working group of the Technical Committees
CENELEC TC 46X, Communication cables, and CENELEC TC 86A, Optical fibres and optical fibre
cables.
The text of the draft was submitted to the Unique Acceptance Procedure and was approved by
CENELEC as EN 50290-2-22 on 2001-05-01.
This European Standard supersedes HD 624.2 S1:1994.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2002-04-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2004-04-01
This European Standard has been prepared under the European Mandate M/212 given to
CENELEC by the European Commission and the European Free Trade Association.
_________
- 3 - EN 50290-2-22:2001
1 Scope
This Part 2-22 of EN 50290 gives specific requirements for PVC sheathing compounds
used for communication cables.
It is to be read in conjunction with Part 2-20 of EN 50290.
2 Normative references
This European Standard incorporat
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN 50290-2-24:2021(Main)
Communication cables - Part 2-24: Common design rules and construction - Polyethylene sheathing compounds
SIST EN 50290-2-24:2021

This document gives specific requirements for halogen free polyolefin based sheathing compounds used for halogen free communication cables with improved characteristics in the case of fire. Compounds, described by this document, are commonly also named HFFR or HFFR-LS (halogen free, flame/fire retardant, low smoke), see also EN 50290 2 20. It is expected to be read in conjunction with EN 50290 2 20, the product standards EN 50288 series, EN 60794 series and other applicable product standards. Improved characteristics in the case of fire are demonstrated by specific fire tests on cables for flame/fire retardant applications (e.g. single or bunched cable fire test). Additional tests to prove the characteristics in case of fire, e.g. such as smoke emission test, might also be part of the dedicated product standard or specification. This document describes the compound types as given in Table 1. Table 1 — Sheathing compounds Compound grades Max. operating temperature Comment Type 1 70°C thermoplastic standard Type 2 90°C thermoplastic, higher temperature Type 3 90°C crosslinked, higher temperature

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50290-2-27:2021(Main)
Communication cables - Part 2-27: Common design rules and construction - Halogen free polyolefin based sheathing compounds for cables having improved flame and fire properties (HFFR)
SIST EN 50290-2-27:2021

This document gives specific requirements for halogen free polyolefin based sheathing compounds used for halogen free communication cables with improved characteristics in the case of fire. Compounds, described by this document, are commonly also named HFFR or HFFR-LS (halogen free, flame/fire retardant, low smoke), see also EN 50290 2 20. It is expected to be read in conjunction with EN 50290 2 20, the product standards EN 50288 series, EN 60794 series and other applicable product standards. Improved characteristics in the case of fire are demonstrated by specific fire tests on cables for flame/fire retardant applications (e.g. single or bunched cable fire test). Additional tests to prove the characteristics in case of fire, e.g. such as smoke emission test, might also be part of the dedicated product standard or specification. This document describes the compound types as given in Table 1. Table 1 — Sheathing compounds Compound grades Max. operating temperature Comment Type 1 70°C thermoplastic standard Type 2 90°C thermoplastic, higher temperature Type 3 90°C crosslinked, higher temperature

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50290-2-20:2016(Main)
Communication cables - Part 2-20: Common design rules and construction - General
SIST EN 50290-2-20:2016

EN 50290-2-NN contains, in its various parts, the requirements for polymeric insulating, sheathing and covering materials that are used for metallic and optical fibre cables (Table 1). The materials to be used for EN standardised communication cables are not, and will not be, restricted only to those defined (Table 1). New materials for cables will be described in further parts of the series. The current structure of the EN 50290-2-NN series is outlined in Annex A. Furthermore, the use of materials described in the EN 50290-2-NN series for other cable applications outside those defined (Table 1) is not prohibited, but it is strongly recommended that expert advice be taken before such use, or before any proposal for incorporation into another standard.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50290-2-29:2016(Main)
Communication cables - Part 2-29: Common design rules and construction - Crosslinked polyethylene insulation compounds: instrumentation, control and field bus cables
SIST EN 50290-2-29:2016

This Part 2-29 of EN 50290 gives specific requirements for Crosslinked Polyethylene (XLPE) compounds to be used for the insulation of instrumentation, control and field bus cables. There are several routes used for manufacture of XLPE insulated cables and as a consequence a number of different types of polyethylene compound may be specified. The compounds required for the different manufacturing processes are described (Table 1). The unstabilised materials require antioxidant to be added during the cable extrusion process.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50290-2-35:2016(Main)
Communication cables - Part 2-35: Common design rules and construction - Polyamide sheathing compound
SIST EN 50290-2-35:2016

This Part 2-35 of EN 50290 gives specific requirements for Polyamide and Polyamide alloys to be used for the inner and outer sheathing of cables. It is to be read in conjunction with Part 2-20 of EN 50290, the product standards EN 50288-7 and EN 61158 and other applicable product standards. Using raw material and type test data as outlined in this standard, the raw material supplier will have sufficient data to demonstrate compliance and warrant that the material is suitable for the specified application.

  • Standard
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50290-2-36:2016(Main)
Communication cables - Part 2-36: Common design rules and construction - Crosslinked Silicone rubber insulation compound
SIST EN 50290-2-36:2016

This Part 2-36 of EN 50290 gives specific requirements for crosslinked Silicone rubber compound (SiR) to be used for the insulation of fire resistant cables. It is essential to read this European Standard in conjunction with Part 2-20 of EN 50290 and other applicable product standards. Using raw material and type test data as outlined in this standard, the raw material supplier will have sufficient data to demonstrate compliance and warrant that the material is suitable for the specified application. This part 2-36 of EN 50290 describes the compound type as given in Table 1.

  • Standard
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50290-2-38:2016(Main)
Communication cables - Part 2-38: Common design rules and construction - Polypropylene insulation for coaxial cables
SIST EN 50290-2-38:2016

This Part 2-38 of EN 50290 gives specific requirements for PP compounds to be used for the insulation of coaxial cables. It is to be read in conjunction with EN 50290-2-20, EN 50117 and other applicable product standards. Grades PP-S1 and PP-F1 correspond to materials specified in the previous version 50290 2-25. These relatively soft Polypropylene compounds have good low temperature properties and are highly stabilised. Grades PP-S2 and PP-F2 exhibit properties more typical of Polypropylene and are designed for general Coax applications where high crush resistance and superior dielectric properties are needed. Using raw material and type test data as outlined in this standard, the raw material supplier will have sufficient data to demonstrate compliance and warrant that the material is suitable for the specified application.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50290-2-37:2016(Main)
Communication cables - Part 2-37: Common design rules and construction - Polyethylene insulation for coaxial cables
SIST EN 50290-2-37:2016

This Part 2-37 of EN 50290 gives specific requirements for PE compounds to be used for the insulation of coaxial cables. It is to be read in conjunction with EN 50290-2-20, EN 50117 and other applicable product standards. Using raw material and type test data as outlined in this standard, the raw material supplier will have sufficient data to demonstrate compliance and warrant that the material is suitable for the specified application.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50290-2-21:2001/A1:2007/AC:2016(Corrigendum)
Communication cables - Part 2-21: Common design rules and construction - PVC insulation compounds
SIST EN 50290-2-21:2002/A1:2008/AC:2016

TC origin - moving position of a footnote in Table
No xml version as the mother standard is from 2001 (SV on 2016-02-05).

  • Corrigendum
    1 page
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 50290-2-25:2013(Main)
Communication cables - Part 2-25: Common design rules and construction - Polypropylene insulation compounds
SIST EN 50290-2-25:2014

This European Standard gives specific requirements for PP compounds to be used for multi-element metallic data cables for indoor application. Type 1 is typically a copolymer with better low temperature properties. Type 2 is typically a homopolymer with superior hardness giving better crush resistance. Using compound and type test data as outlined in this standard, the compound supplier will have sufficient data to demonstrate compliance and warrant that the material is suitable for the specified application.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day