prEN IEC 60966-2-8:2025
(Main)Radio frequency and coaxial cable assemblies - Part 2-8: Detail specification for cable assemblies for radio and TV receivers - Frequency range up to 3000 MHz, screening class A++, IEC 61169-47 connectors
Radio frequency and coaxial cable assemblies - Part 2-8: Detail specification for cable assemblies for radio and TV receivers - Frequency range up to 3000 MHz, screening class A++, IEC 61169-47 connectors
Cordons coaxiaux et cordons pour fréquences radioélectriques - Partie 2-8: Spécification particulière pour cordons de connexion de récepteurs radio ou TV - Plage de fréquences jusqu’à 3000 MHz, classe d'écrantage A++, connecteurs IEC 61169-47
Sestavi radiofrekvenčnih in koaksialnih kablov - 2-8. del: Podrobna specifikacija za kabelske sestave za radijske in TV sprejemnike - Frekvenčno območje do 3000 MHz, zaslonski razred A++, konektorji po standardu IEC 61169-47
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-marec-2025
Sestavi radiofrekvenčnih in koaksialnih kablov - 2-8. del: Podrobna specifikacija za
kabelske sestave za radijske in TV sprejemnike - Frekvenčno območje do 3000
MHz, zaslonski razred A++, konektorji po standardu IEC 61169-47
Radio frequency and coaxial cable assemblies - Part 2-8: Detail specification for cable
assemblies for radio and TV receivers - Frequency range up to 3000 MHz, screening
class A++, IEC 61169-47 connectors
Cordons coaxiaux et cordons pour fréquences radioélectriques - Partie 2-8: Spécification
particulière pour cordons de connexion de récepteurs radio ou TV - Plage de fréquences
jusqu’à 3000 MHz, classe d'écrantage A++, connecteurs IEC 61169-47
Ta slovenski standard je istoveten z: prEN IEC 60966-2-8:2025
ICS:
33.120.10 Koaksialni kabli. Valovodi Coaxial cables. Waveguides
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
46/1023/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 60966-2-8 ED2
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2025-01-03 2025-03-28
SUPERSEDES DOCUMENTS:
46/989/CD, 46/1005/CC
IEC TC 46 : CABLES, WIRES, WAVEGUIDES, RF CONNECTORS, RF AND MICROWAVE PASSIVE COMPONENTS AND ACCESSORIES
SECRETARIAT: SECRETARY:
United States of America Mr David Hess
OF INTEREST TO THE FOLLOWING COMMITTEES: HORIZONTAL FUNCTION(S):
SC 46A, SC 46F
ASPECTS CONCERNED:
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft for Vote
(CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Recipients of this document are invited to submit, with their comments, notification of any relevant “In Some Countries” clau ses to
be included should this proposal proceed. Recipients are reminded that the CDV stage is the final stage for submitting ISC c lauses.
(SEE AC/22/2007 OR NEW GUIDANCE DOC).
TITLE:
Radio frequency and coaxial cable assemblies – Part 2-8: Detail specification for cable assemblies for radio
and TV receivers – Frequency range up to 3000 MHz, Screening class A++, IEC 61169-47 connectors
PROPOSED STABILITY DATE: 2028
NOTE FROM TC/SC OFFICERS:
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.
46/1023/CDV – 2 – IEC CDV 60966-2-8 © IEC 2024
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Detail specification . 7
Annex A (informative) Identification and marking . 11
A.1 Identification – Type name . 11
A.2 Marking . 11
Table A.1 – Variants of connector . 11
IEC CDV 60966-2-8 © IEC 2024 – 3 – 46/1023/CDV
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
RADIO FREQUENCY AND COAXIAL CABLE ASSEMBLIES –
Part 2-8: Detail specification
for cable assemblies for radio and TV receivers – Frequency range up to
3 000 MHz, Screening class A++, IEC 61169-47 connectors
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
rights. IEC shall not be held responsible for identifying any or all such patent rights.
IEC 60966-2-8 has been prepared by IEC technical committee 46: Cables, wires, waveguides,
RF connectors, RF and microwave passive components and accessories. It is an International
Standard.
This second edition cancels and replaces the first edition published in 2022. This edition constitutes a
technical revision.
This edition includes the following significant technical changes with respect to the previous
edition:
[5] Drawing expanded by right angled connectors
[12] Female F-connectors canceled (not standardized by IEC 61169-47)
46/1023/CDV – 4 – IEC CDV 60966-2-8 © IEC 2024
[14] Reflection properties (Return loss): Different values for straight and right angled connectors
[14] Insertion loss: Different factors for insertion loss calculation for straight and right angled
connectors,
[14] Loop resistance: Loop resistance was set to 1 Ohm max. value for the complete length.
The text of this International Standard is based on the following documents:
Draft Report on voting
46/xxx/FDIS 46/xxx/RVD
Full information on the voting for its approval can be found in the report on voting indicated in
the above table.
The language used for the development of this International Standard is English.
This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in
accordance with ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC Supplement, available
at www.iec.ch/members_experts/refdocs. The main document types developed by IEC are
described in greater detail at www.iec.ch/standardsdev/publications.
A list of all parts in the IEC 60966 series, published under the general title Radio frequency and
coaxial cable assemblies, can be found on the IEC website.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under webstore.iec.ch in
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.