EN 60335-2-58:2005/A12:2016
(Amendment)Household and similar electrical appliances - Safety - Part 2-58: Particular requirements for commercial electric dishwashing machines
Household and similar electrical appliances - Safety - Part 2-58: Particular requirements for commercial electric dishwashing machines
2011-05-27 - UAP editing allocated to hamrani@cencenelec.eu * D134/C045: No NWI request needed for Amdts aligning existing standards prepared by CLC/TC 61 to the essential requirements of the Machinery Directive (2006/42/EC)
Sicherheit elektrischer Geräte für den Hausgebrauch und ähnliche Zwecke - Teil 2-58: Besondere Anforderungen für elektrische Spülmaschinen für den gewerblichen Gebrauch
Appareils électrodomestiques et analogues - Sécurité - Partie 2-58: Règles particulières pour les lave-vaisselle électriques à usage collectif
Gospodinjski in podobni električni aparati - Varnost - 2-58. del: Posebne zahteve za komercialne električne pomivalne stroje - Dopolnilo A12
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-marec-2016
*RVSRGLQMVNLLQSRGREQLHOHNWULþQLDSDUDWL9DUQRVWGHO 3RVHEQH]DKWHYH
]DNRPHUFLDOQHHOHNWULþQHSRPLYDOQHVWURMH'RSROQLOR$
Household and similar electrical appliances - Safety - Part 2-58: Particular requirements
for commercial electric dishwashing machines
Ta slovenski standard je istoveten z: EN 60335-2-58:2005/A12:2016
ICS:
97.040.40 Pomivalni stroji Dishwashers
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN 60335-2-58:2005/A12
NORME EUROPÉENNE
EUROPÄISCHE NORM
January 2016
ICS 97.040.40
English Version
Household and similar electrical appliances - Safety -
Part 2-58: Particular requirements for commercial electric
dishwashing machines
Appareils électrodomestiques et analogues - Sécurité - Sicherheit elektrischer Geräte für den Hausgebrauch und
Partie 2-58: Règles particulières pour les lave-vaisselle ähnliche Zwecke - Teil 2-58: Besondere Anforderungen für
électriques à usage collectif elektrische Spülmaschinen für den gewerblichen Gebrauch
This amendment A12 modifies the European Standard EN 60335-2-58:2005; it was approved by CENELEC on 2015-06-22. CENELEC
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this amendment the
status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 60335-2-58:2005/A12:2016 E
Contents
Page
European foreword . 3
Introduction . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 6
4 General requirement. 6
7 Marking and instructions . 6
19 Abnormal operation. 8
20 Stability and mechanical hazards . 9
21 Mechanical strength . 9
22 Construction . 9
27 Provisions for earthing . 11
Annex ZC (normative) Normative references to international publications with their
corresponding European publications. 12
Annex ZE (informative) Specific additional requirements for appliances and machines intended
for commercial use . 14
Annex ZF (informative) Criteria applied for the allocation of products covered by standards in
the EN 60335 series under LVD or MD . 14
Annex ZAA (normative) Emission of acoustical noise . 15
ZAA.1 Noise reduction . 15
ZAA.2 Noise test code . 15
ZAA.2.1 Emission sound pressure level determination . 15
ZAA.2.2 Sound power level determination . 15
ZAA.2.3 Mounting and installation conditions . 15
ZAA.2.4 Operating conditions . 16
ZAA.2.5 Measurement uncertainties . 16
ZAA.2.6 Information to be recorded . 16
ZAA.2.7 Information to be reported . 16
ZAA.2.8 Declaration and verification of noise emission values . 17
Annex ZZ (informative) Coverage of Essential Requirements of EU Directives. 18
Bibliography . 19
European foreword
This document (EN 60335-2-58:2005/A12:2016) has been prepared by CLC/TC 61 "Safety of household and
similar electrical appliances".
The following dates are fixed:
(dop) 2016-07-22
• latest date by which the document has to be implemented at
national level by publication of an identical national
standard or by endorsement
(dow) 2019-01-22
• latest date by which the national standards conflicting with the
document have to be withdrawn
This amendment supplements or modifies the corresponding clauses of EN 60335-1:2012 and its
amendments, EN 60335-2-58:2005, EN 60335-2-58:2005/A1:2008, EN 60335-2-58:2005/A11:2010 and
EN 60335-2-58:2005/A2:2015.
This Part 2 applies in conjunction with EN 60335-1:2012 and its amendments, which is referred to in this text
as “Part 1”. This Part 2 supplements or modifies the corresponding clauses of Part 1 as indicated in the text.
NOTE 1 The following numbering system is used:
– subclauses, tables and figures that are numbered starting from 101 are additional to those in Part 1;
– unless notes are in a new subclause or involve notes in Part 1, they are numbered starting from 101, including those
in a replaced clause or subclause;
– additional annexes are lettered AA, BB, etc.
Clauses, subclauses, notes, tables, figures and annexes which are additional to those in IEC 60335-2-58 are prefixed
“Z”.
NOTE 2 The following print types are used:
– requirements: in roman type;
– test specifications: in italic type;
– notes: in small roman type.
Words in bold in the text are defined in Clause 3. When a definition concerns an adjective, the adjective and the
associated noun are also in bold.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CENELEC by the European Commission and
the European Free Trade Association, and supports essential requirements of EU Directive(s).
For the relationship with EU Directive(s) see informative Annex ZZ, which is an integral part of this
document.
Introduction
Replacement:
This European Standard has been prepared to provide a means of conforming to essential safety
requirements of the Machinery Directive 2006/42/EC. Other requirements and other EU Directives may be
applicable to the machines falling within the scope of this standard.
This standard is a product family standard dealing with the safety of commercial electric dishwashing
machines and takes precedence over horizontal and generic standards covering the same subject.
This standard recognises the level of protection against hazards such as electrical, mechanical, thermal, fire
and radiation of commercial electric dishwashing machines when operated as in normal use taking into
account the manufacturer's instructions. It also covers any reasonably foreseeable misuse of the machinery
and takes into account the way in which electromagnetic phenomena can affect the safe operation of
commercial electric dishwashing machines.
A commercial electric dishwashing machine that complies with the text of this standard will not necessarily
be considered to comply with the safety principles of the standard if, when examined and tested, it is found to
have other features that impair the level of safety covered by these requirements.
This standard takes into account the requirements of HD 60364-1 as far as possible so that there is
compatibility with the wiring rules when the machinery is connected to the supply mains. However, national
wiring rules may differ.
Pressurized components incorporated in machines within the scope of this standard are pressure equipment
which is classified no higher than category I of the Pressure Equipment Directive (2014/68/EU). According to
Article 1, item 2.f of the Pressure Equipment Directive, this equipment is excluded from its scope.
1 Scope
Add after the first paragraph:
These dishwashing machines are designed to be connected to hot and/or cold water supply. Dishwashing
machines making use of steam or hot water for heating purposes are also within the scope of this standard.
Replace the second dashed item in NOTE 103 by the following:
in some countries additional requirements on the safe use of the equipment covered may be specified by the
national health authorities, the national authorities responsible for the protection of labour, the national water supply
authorities and similar authorities.
Add the following dashed item in NOTE 103:
for scrapping of appliances, additional requirements may be necessary.
Delete NOTE 104.
Addition:
This standard does not apply to
appliances designed exclusively for industrial purposes, for example machines used in the food industry
for cleaning receptacles that serve as packaging for final products (e.g. bottle-cleaning machines);
dishwashers that do not form one functional unit, for example where a transportation device transfers
the load from one separate unit to another;
separately driven transport devices not confined in the appliance;
appliances intended to be used in locations where special conditions prevail, such as the presence of a
corrosive or explosive atmosphere (dust, vapour or gas);
conveyor dishwashers (EN 50416).
2 Normative references
Add the following normative references to Clause 2 of EN 60335-1:2012:
EN 60704-1:2010, Household and similar electrical appliances – Test code for the determination of airborne
noise – Part 1: General requirements (IEC 60704-1:2010)
EN ISO 3744, Acoustics – Determination of sound power levels and sound energy levels of noise sources
using sound pressure – Engineering methods for an essentially free field over a reflecting plane (ISO 3744)
EN ISO 3746, Acoustics – Determination of sound power levels and sound energy levels of noise sources
using sound pressure – Survey method using an enveloping measurement surface over a reflecting plane
(ISO 3746)
EN ISO 4871, Acoustics – Declaration and verification of noise emission values of machinery and equipment
(ISO 4871)
EN ISO 9614-2, Acoustics – Determination of sound power levels of noise sources using sound intensity –
Part 2: Measurement by scanning (ISO 9614-2)
EN ISO 11201, Acoustics – Noise emitted by machinery and equipment – Determination of emission sound
pressure levels at a work station and at other specified positions in an essentially free field over a reflecting
plane with negligible environmental corrections (ISO 11201)
EN ISO 11203, Acoustics – Noise emitted by machinery and equipment – Determination of emission sound
pressure levels at a work station and at other specified positions from the sound power level (ISO 11203)
3 Terms and definitions
3.1 Replacement:
For the purpose o
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.