Household and similar electrical appliances - Safety - Part 2-27: Particular requirements for appliances for skin exposure to optical radiation

This European Standard deals with the safety of electric appliances for skin exposure to ultraviolet and infrared radiation, their maximum rated voltages being not more than 250 V for single phase and 480 V for all others.

Sicherheit elektrischer Geräte für den Hausgebrauch und ähnliche Zwecke - Teil 2-27: Besondere Anforderungen für Hautbestrahlungsgeräte mit optischer Strahlung

Appareils électrodomestiques et analogues - Sécurité - Partie 2-27: Exigences particulières pour les appareils d'exposition de la peau aux rayonnements optiques

IEC 60335-2-27:2019 est disponible sous forme de IEC 60335-2-27:2019 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.L'IEC 60335-2-27:2019 traite de la sécurité des appareils électriques comportant des émetteurs pour l'exposition de la peau aux rayonnements optiques (longueur d'onde de 100 nm à 1 mm), destinés à des usages domestiques et analogues, dont la tension assignée n'est pas supérieure à 250 V pour les appareils monophasés et à 480 V pour les autres appareils. Les appareils alimentés par batteries et autres appareils alimentés en courant continu relèvent du domaine d'application de la présente norme. Les appareils à double alimentation, fonctionnant sur secteur ou sur batterie, sont vus comme des appareils alimentés par batteries lorsqu'ils fonctionnent sur batterie. Dans la mesure du possible, la présente norme traite des dangers ordinaires présentés par les appareils, encourus par toutes les personnes qui utilisent les appareils dans les solariums, salons de beauté et locaux analogues ou à domicile. Cependant, la présente norme ne tient pas compte en général: – des personnes (y compris des enfants) dont les capacités physiques, sensorielles ou mentales ou le manque d'expérience et de connaissances les empêchent d'utiliser l'appareil en toute sécurité sans surveillance ou instruction; – de l'utilisation de l'appareil comme jouet par des enfants. L'attention est attirée sur le fait que: – pour les appareils destinés à être utilisés dans des véhicules ou à bord de navires ou d'avions, des exigences supplémentaires peuvent être nécessaires; – dans de nombreux pays, des exigences supplémentaires sont spécifiées par les autorités sanitaires nationales, les organismes nationaux en charge de la protection des travailleurs et les organismes analogues; – l'IEC 60598-1 s'applique dans la limite du raisonnable. La présente norme ne s'applique pas: – aux appareils destinés aux soins de la peau ou des cheveux (IEC 60335-2-23); – aux appareils de sauna chauffants et aux cabines infrarouges (IEC 60335-2-53); – aux appareils cosmétiques et aux appareils de soins de beauté, y compris les lasers et les sources de lumière de forte intensité (IEC 60335-2-113); – aux appareils à but médical (IEC 60601); – aux appareils utilisant un rayonnement UV pour d'autres besoins que le bronzage de la peau; – aux appareils destinés à être utilisés dans des locaux présentant des conditions particulières, telles que la présence d'une atmosphère corrosive ou explosive (poussière, vapeur ou gaz). Cette sixième édition annule et remplace la cinquième édition parue en 2009, l'Amendement 1:2012 et l'Amendement 2:2015. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: – mise en correspondance du texte avec l'IEC 60335-1, Ed 5, et ses Amendements 1 et 2; – définition de la transmission lumineuse (3.1.102); – ajout des exigences relatives aux parties de l'appareil soumises aux essais et fonctionnant de manière autonome (30.2). La présente partie 2 doit être utilisée conjointement avec la dernière édition de l'IEC 60335-1 et ses amendements. Elle a été établie su

Gospodinjski in podobni električni aparati - Varnost - 2-27. del: Posebne zahteve za aparate za nego kože z ultravijoličnim in infrardečim sevanjem

General Information

Status
Not Published
Current Stage
4099 - Decision to launch vote
Due Date
25-Mar-2022
Completion Date
25-Mar-2022

RELATIONS

Buy Standard

Draft
prEN IEC 60335-2-27:2021 - BARVE na PDF-str 15
English language
39 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
oSIST prEN IEC 60335-2-27:2021
01-januar-2021
Nadomešča:
SIST EN 60335-2-27:2014

Gospodinjski in podobni električni aparati - Varnost - 2-27. del: Posebne zahteve

za aparate za nego kože z ultravijoličnim in infrardečim sevanjem

Household and similar electrical appliances - Safety - Part 2-27: Particular requirements

for appliances for skin exposure to ultraviolet and infrared radiation

Sicherheit elektrischer Geräte für den Hausgebrauch und ähnliche Zwecke - Teil 2-27:

Besondere Anforderungen für Hautbestrahlungsgeräte mit Ultraviolett- und
Infrarotstrahlung

Appareils électrodomestiques et analogues - Sécurité - Partie 2-27: Règles particulières

pour les appareils d'exposition de la peau aux rayonnements ultraviolets et infrarouges

Ta slovenski standard je istoveten z: prEN IEC 60335-2-27:2020
ICS:
13.120 Varnost na domu Domestic safety
97.170 Oprema za nego telesa Body care equipment
oSIST prEN IEC 60335-2-27:2021 en

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN IEC 60335-2-27:2021
---------------------- Page: 2 ----------------------
oSIST prEN IEC 60335-2-27:2021
EUROPEAN STANDARD DRAFT
prEN IEC 60335-2-27
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2020
ICS 13.120; 97.170 Will supersede EN 60335-2-27:2013 and all of its
amendments and corrigenda (if any)
English Version
Household and similar electrical appliances - Safety - Part 2-27:
Particular requirements for appliances for skin exposure to
ultraviolet and infrared radiation
(IEC 60335-2-27:2019)

Appareils électrodomestiques et analogues - Sécurité - Sicherheit elektrischer Geräte für den Hausgebrauch und

Partie 2-27: Règles particulières pour les appareils ähnliche Zwecke - Teil 2-27: Besondere Anforderungen für

d'exposition de la peau aux rayonnements ultraviolets et Hautbestrahlungsgeräte mit Ultraviolett- und

infrarouges Infrarotstrahlung
(IEC 60335-2-27:2019) (IEC 60335-2-27:2019)
This draft European Standard is submitted to CENELEC members for enquiry.
Deadline for CENELEC: 2021-02-12.
The text of this draft consists of the text of IEC 60335-2-27:2019.

If this draft becomes a European Standard, CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which

stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CENELEC in three official versions (English, French, German).

A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to

the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,

Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the

Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,

Turkey and the United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to

provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and

shall not be referred to as a European Standard.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.

Project: 71382 Ref. No. prEN IEC 60335-2-27:2020 E
---------------------- Page: 3 ----------------------
oSIST prEN IEC 60335-2-27:2021
prEN IEC 60335-2-27:2020 (E)
European foreword

This document (prEN IEC 60335-2-27:2020) consists of the text of document IEC 60335-2-27:2019,

prepared by IEC/TC 61 "Safety of household and similar electrical appliances"
This document is currently submitted to the CENELEC Enquiry.
The following dates are proposed:
• latest date by which the existence of this document (doa) dor + 6 months
has to be announced at national level
• latest date by which this document has to be (dop) dor + 12 months
implemented at national level by publication of an
identical national standard or by endorsement
• latest date by which the national standards (dow) dor + 36 months
conflicting with this document have to be withdrawn (to be confirmed or
modified when voting)

This document will supersede EN 60335-2-27:2013 and all of its amendments and corrigenda (if any).

This standard is not linked to European legislation unless it is used in conjunction with A11.

Secretary Note: EN IEC 60335-2-27:2020 shall be read in conjunction with common
modifications in EN IEC 60335-2-27/A11:2020 (PR=71383)
---------------------- Page: 4 ----------------------
oSIST prEN IEC 60335-2-27:2021
IEC 60335-2-27
Edition 6.0 2019-05
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Household and similar electrical appliances – Safety –
Part 2-27: Particular requirements for appliances for skin exposure to optical
radiation
Appareils électrodomestiques et analogues – Sécurité –
Partie 2-27: Exigences particulières pour les appareils d'exposition de la peau
aux rayonnements optiques
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 13.120; 97.170 ISBN 978-2-8322-6892-6

Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale
---------------------- Page: 5 ----------------------
oSIST prEN IEC 60335-2-27:2021
– 2 – IEC 60335-2-27:2019 © IEC 2019
CONTENTS

FOREWORD ........................................................................................................................... 4

INTRODUCTION ..................................................................................................................... 7

1 Scope .............................................................................................................................. 8

2 Normative references ...................................................................................................... 8

3 Terms and definitions ...................................................................................................... 9

4 General requirement ...................................................................................................... 10

5 General conditions for the tests ..................................................................................... 10

6 Classification ................................................................................................................. 10

7 Marking and instructions ................................................................................................ 10

8 Protection against access to live parts ........................................................................... 14

9 Starting of motor-operated appliances ........................................................................... 14

10 Power input and current ................................................................................................. 14

11 Heating .......................................................................................................................... 15

12 Void ............................................................................................................................... 15

13 Leakage current and electric strength at operating temperature ..................................... 15

14 Transient overvoltages .................................................................................................. 15

15 Moisture resistance ....................................................................................................... 16

16 Leakage current and electric strength ............................................................................ 16

17 Overload protection of transformers and associated circuits .......................................... 16

18 Endurance ..................................................................................................................... 16

19 Abnormal operation ....................................................................................................... 16

20 Stability and mechanical hazards ................................................................................... 17

21 Mechanical strength ...................................................................................................... 17

22 Construction .................................................................................................................. 18

23 Internal wiring ................................................................................................................ 21

24 Components .................................................................................................................. 21

25 Supply connection and external flexible cords ............................................................... 22

26 Terminals for external conductors .................................................................................. 22

27 Provision for earthing .................................................................................................... 22

28 Screws and connections ................................................................................................ 22

29 Clearances, creepage distances and solid insulation ..................................................... 22

30 Resistance to heat and fire ............................................................................................ 22

31 Resistance to rusting ..................................................................................................... 22

32 Radiation, toxicity and similar hazards ........................................................................... 23

Annexes ............................................................................................................................... 28

Annex R (normative) Software evaluation ............................................................................ 29

Annex AA (normative) Measurement of luminance ............................................................... 30

Annex BB (informative) Detailed classification of UV appliances .......................................... 31

Annex CC (informative) Fluorescent UV lamp equivalency code .......................................... 33

Annex DD (informative) Guidelines for the development of an exposure time schedule

for UV exposure .................................................................................................................... 34

---------------------- Page: 6 ----------------------
oSIST prEN IEC 60335-2-27:2021
IEC 60335-2-27:2019 © IEC 2019 – 3 –

Annex EE (informative) Irradiance limits set by regional or national authorities .................... 35

Bibliography .......................................................................................................................... 37

Figure 101 – Measuring points for appliances that are arranged over a person ..................... 26

Figure 102 – Measuring points for appliances exposing a sitting person ............................... 26

Figure 103 – Erythema action spectrum ................................................................................ 27

Table 101 – Maximum transmission of goggles ..................................................................... 25

Table BB.1 – Limits of effective irradiance ............................................................................ 32

Table EE.1 – Europe: EN 60335-2-27 limits .......................................................................... 35

Table EE.2 – Australia and New Zealand: AS/NZS 60335.2.27 limits .................................... 35

Table EE.3 – USA: 21 CFR 1040.20 limits ............................................................................ 36

---------------------- Page: 7 ----------------------
oSIST prEN IEC 60335-2-27:2021
– 4 – IEC 60335-2-27:2019 © IEC 2019
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES –
SAFETY –
Part 2-27: Particular requirements for appliances
for skin exposure to optical radiation
FOREWORD

1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising

all national electrotechnical committees (IEC National Committees). The object of IEC is to promote

international co-operation on all questions concerning standardization in the electrical and electronic fields. To

this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,

Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC

Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested

in the subject dealt with may participate in this preparatory work. International, governmental and non-

governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely

with the International Organization for Standardization (ISO) in accordance with conditions determined by

agreement between the two organizations.

2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international

consensus of opinion on the relevant subjects since each technical committee has representation from all

interested IEC National Committees.

3) IEC Publications have the form of recommendations for international use and are accepted by IEC National

Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC

Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any

misinterpretation by any end user.

4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications

transparently to the maximum extent possible in their national and regional publications. Any divergence

between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in

the latter.

5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity

assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any

services carried out by independent certification bodies.

6) All users should ensure that they have the latest edition of this publication.

7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and

members of its technical committees and IEC National Committees for any personal injury, property damage or

other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and

expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC

Publications.

8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is

indispensable for the correct application of this publication.

9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of

patent rights. IEC shall not be held responsible for identifying any or all such patent rights.

International Standard IEC 60335-2-27 has been prepared by IEC technical committee 61:

Safety of household and similar electrical appliances.

This sixth edition cancels and replaces the fifth edition published in 2009, Amendment 1:2012

and Amendment 2:2015. This edition constitutes a technical revision.

This edition includes the following significant technical changes with respect to the previous

edition:
– aligns the text with IEC 60335-1, Ed 5, and its Amendments 1 and 2;
– luminous transmission has been defined (3.1.102);

– requirements for testing parts of the appliance that are operated unattended are added

(30.2).
---------------------- Page: 8 ----------------------
oSIST prEN IEC 60335-2-27:2021
IEC 60335-2-27:2019 © IEC 2019 – 5 –
The text of this International Standard is based on the following documents:
FDIS Report on voting
61/5796/FDIS 61/5837/RVD

Full information on the voting for the approval of this International Standard can be found in

the report on voting indicated in the above table.

This document has been drafted in accordance with the ISO/IEC Directives, Part 2.

A list of all parts of the IEC 60335 series, under the general title: Household and similar

electrical appliances – Safety, can be found on the IEC website.

This part 2 is to be used in conjunction with the latest edition of IEC 60335-1 and its

amendments. It was established on the basis of the fifth edition (2010) of that standard.

NOTE 1 When “Part 1” is mentioned in this standard, it refers to IEC 60335-1.

This part 2 supplements or modifies the corresponding clauses in IEC 60335-1, so as to

convert that publication into the IEC standard: Safety requirements for appliances

for skin exposure to optical radiation.

When a particular subclause of Part 1 is not mentioned in this part 2, that subclause applies

as far as is reasonable. When this standard states "addition", "modification" or "replacement",

the relevant text in Part 1 is to be adapted accordingly.
NOTE 2 The following numbering system is used:

– subclauses, tables and figures that are numbered starting from 101 are additional to those in Part 1;

– unless notes are in a new subclause or involve notes in Part 1, they are numbered starting from 101, including

those in a replaced clause or subclause;
– additional annexes are lettered AA, BB, etc.
NOTE 3 The following print types are used:
– requirements: in roman type;
– test specifications: in italic type;
notes: in small roman type.

Words in bold in the text are defined in Clause 3. When a definition concerns an adjective, the adjective and the

associated noun are also in bold.

The committee has decided that the contents of this document will remain unchanged until the

stability date indicated on the IEC website under "http://webstore.iec.ch" in the data related to

the specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.

NOTE 4 The attention of National Committees is drawn to the fact that equipment manufacturers and testing

organizations may need a transitional period following publication of a new, amended or revised IEC publication in

which to make products in accordance with the new requirements and to equip themselves for conducting new or

revised tests.

It is the recommendation of the committee that the content of this publication be adopted for implementation

nationally not earlier than 12 months or later than 36 months from the date of publication.

---------------------- Page: 9 ----------------------
oSIST prEN IEC 60335-2-27:2021
– 6 – IEC 60335-2-27:2019 © IEC 2019
The following differences exist in the countries indicated below.
– 7.1: The markings are different (USA).
– 10.1: The deviations are different (USA).
– 10.2: The deviations are different (USA).
– 19.101: The test is different (USA).
– 20.1: The test is carried out at an angle of 8° (USA).
– 22.107: The requirement is not applicable (USA).
– 22.108: The maximum timer setting is shorter (USA).
– 32.101: The irradiance limits and the tests are different (USA).
– 32.102: The requirements for protective goggles are different (USA).

IMPORTANT – The 'colour inside' logo on the cover page of this publication indicates

that it contains colours which are considered to be useful for the correct

understanding of its contents. Users should therefore print this document using a

colour printer.
---------------------- Page: 10 ----------------------
oSIST prEN IEC 60335-2-27:2021
IEC 60335-2-27:2019 © IEC 2019 – 7 –
INTRODUCTION

It has been assumed in the drafting of this International Standard that the execution of its

provisions is entrusted to appropriately qualified and experienced persons.

This standard recognizes the internationally accepted level of protection against hazards such

as electrical, mechanical, thermal, fire and radiation of appliances when operated as in

normal use taking into account the manufacturer's instructions. It also covers abnormal

situations that can be expected in practice and takes into account the way in which

electromagnetic phenomena can affect the safe operation of appliances.

This standard takes into account the requirements of IEC 60364 as far as possible so that

there is compatibility with the wiring rules when the appliance is connected to the supply

mains. However, national wiring rules may differ.

If an appliance within the scope of this standard also incorporates functions that are covered

by another part 2 of IEC 60335, the relevant part 2 is applied to each function separately, as

far as is reasonable. If applicable, the influence of one function on the other is taken into

account.

When a part 2 standard does not include additional requirements to cover hazards dealt with

in Part 1, Part 1 applies.

NOTE 1 This means that the technical committees responsible for the part 2 standards have determined that it is

not necessary to specify particular requirements for the appliance in question over and above the general

requirements.

This standard is a product family standard dealing with the safety of appliances and takes

precedence over horizontal and generic standards covering the same subject.

NOTE 2 Horizontal and generic standards covering a hazard are not applicable since they have been taken into

consideration when developing the general and particular requirements for the IEC 60335 series of standards. For

example, in the case of temperature requirements for surfaces on many appliances, generic standards, such as

ISO 13732-1 for hot surfaces, are not applicable in addition to Part 1 or part 2 standards.

An appliance that complies with the text of this standard will not necessarily be considered to

comply with the safety principles of the standard if, when examined and tested, it is found to

have other features that impair the level of safety covered by these requirements.

An appliance employing materials or having forms of construction differing from those detailed

in the requirements of this standard may be examined and tested according to the intent of

the requirements and, if found to be substantially equivalent, may be considered to comply

with the standard.
---------------------- Page: 11 ----------------------
oSIST prEN IEC 60335-2-27:2021
– 8 – IEC 60335-2-27:2019 © IEC 2019
HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES –
SAFETY –
Part 2-27: Particular requirements for appliances
for skin exposure to optical radiation
1 Scope
This clause of Part 1 is replaced by the following.

This International Standard deals with the safety of electrical appliances incorporating

emitters for exposing the skin to optical radiation (wavelength 100 nm to 1 mm), for household

and similar use, their rated voltage being not more than 250 V for single-phase appliances

and 480 V for other appliances.

NOTE 101 Battery-operated appliances and other DC supplied appliances are within the scope of this standard.

Dual supply appliances, either mains-supplied or battery-operated, are regarded as battery-operated appliances

when operated in the battery mode.

As far as practicable, this standard deals with the common hazards presented by appliances

that are encountered by all persons using the appliances in tanning salons, beauty parlours

and similar premises or at home. However, in general, it does not take into account

– persons (including children) whose
• physical, sensory or mental capabilities; or
• lack of experience and knowledge

prevents them from using the appliance safely without supervision or instruction;

– children playing with the appliance.
NOTE 102 Attention is drawn to the fact that

– for appliances intended to be used in vehicles or on board ships or aircraft, additional requirements can be

necessary;

– in many countries, additional requirements are specified by the national health authorities, the national

authorities responsible for the protection of labour and similar authorities;
– IEC 60598-1 is applicable as far as is reasonable.
NOTE 103 This standard does not apply to
– appliances for skin or hair care (IEC 60335-2-23);
– sauna heating appliances and infrared cabins (IEC 60335-2-53);

– cosmetic and beauty care appliances incorporating lasers and intense light sources (IEC 60335-2-113)

– appliances for medical purposes (IEC 60601);
– appliances that use UV radiation for purposes other than tanning the skin;

– appliances intended to be used in locations where special conditions prevail, such as the presence of a

corrosive or explosive atmosphere (dust, vapour or gas).
2 Normative references
This clause of Part 1 is applicable except as follows.
Addition:

IEC 61228, Fluorescent ultraviolet lamps used for tanning – Measurement and specification

method
---------------------- Page: 12 ----------------------
oSIST prEN IEC 60335-2-27:2021
IEC 60335-2-27:2019 © IEC 2019 – 9 –
IEC 62471:2006, Photobiological safety of lamps and lamp systems
3 Terms and definitions
This clause of Part 1 is applicable except as follows.
3.1 Definitions relating to physical characteristics
3.1.101
effective irradiance

irradiance of electromagnetic radiation weighted according to a specified action spectrum

3.1.102
luminous transmission

percentage of incident light passing through a material weighted by the spectral sensitivity of

the human eye and integrated over the wavelength range of 380 and 780 nm
3.5 Definitions relating to types of appliances
3.5.101
UV appliance
appliance incorporating UV emitters for tanning purposes
3.5.102
IR appliance
appliance incorporating one or more IR emitters
3.5.103
VIS appliance
appliance incorporating one or more VIS emitters
3.6 Definitions relating to parts of an appliance
3.6.101
ultraviolet emitter

radiating source constructed to emit electromagnetic energy at wavelengths between 200 nm and

400 nm

Note 1 to entry: A fluorescent UV lamp for tanning is an example of a UV emitter.

Note 2 to entry: UV radiation with wavelengths below 200 nm is not easily transmitted through air and usually

exists only in a vacuum.
Note 3 to entry: Ultraviolet emitters are also referred to as UV emitters.
3.6.102
infrared emitter

radiating source constructed to emit electromagnetic energy at wavelengths between 780 nm

and 1 mm
Note 1 to entry: Infrared emitters are also referred to as IR emitters.
3.6.103
visual emitter

radiating source constructed to emit electromagnetic energy at wavelengths of 400 nm

to 780 nm
Note 1 to entry: Visual emitters are also referred to as VIS emitters.
---------------------- Page: 13 ----------------------
oSIST prEN IEC 60335-2-27:2021
– 10 – IEC 60335-2-27:2019 © IEC 2019
3.6.104
UV filter

device used to modify the ultra-violet radiation passing through it, generally by altering the

spectral distribution
4 General requirement
This clause of Part 1 is applicable.
5 General conditions for the tests
This clause of Part 1 is applicable except as follows.

5.101 Appliances with IR emitters only are tested as heating appliances. All other

appliances are tested as motor-operated appliances.
6 Classification
This clause of Part 1 is applicable except as follows.

6.101 UV appliances shall be one of the following types with respect to the emission of

ultraviolet radiation:
– appliances suitable for household use;
– appliances for commercial use only.

NOTE 1 Appliances for household use can also be for commercial use, such as in tanning salons, beauty parlours

and similar premises.
NOTE 2 Detailed classification of the appliances is described in Annex BB.
Compliance is checked by inspection and by the relevant tests.
7 Marking and instructions
This clause of Part 1 is applicable except as follows.
7.1 Addition:

UV appliances intended for commercial use, such as in tanning salons, beauty parlours and

similar premises shall be marked with the Prohibition sign “not for household use” or with the

substance of the following:
Not for household use

Appliances having fluorescent UV lamps for tanning shall be marked with the fluorescent UV

lamp equivalency code range. This equivalency code range identifies the fluorescent UV

lamps for tanning that shall be used in the appliance.

NOTE 101 Details of the fluorescent UV lamp code that is marked on the lamp are given in IEC 61228 and are

reproduced in Annex CC for
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.