EN 60893-3-6:2004
(Main)Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6: Specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins
Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6: Specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins
Gives the requirements for industrial rigid laminated sheets for electrical purposes based on silicone resins and different reinforcements. Applications and distinguishing properties are given. Materials which conform to this specification meet established levels of performance. However, the selection of a material by a user for a specific application should be based on the actual requirements necessary for adequate performance in that application and not based on this specification alone. In this revision of the EN 60893 series of specifications, new material types have been included, changes have been made to the property requirements of some existing types, a new method for testing permittivity and dissipation factor has been added, and all non-specification data for each type has been moved to a new Part 4 document - EN 60893-4: Typical values.
Isolierstoffe - Tafeln aus technischen Schichtpressstoffen auf der Basis warmhärtender Harze für elektrotechnische Zwecke - Teil 3-6: Bestimmungen für einzelne Werkstoffe - Anforderungen für Tafeln aus Schichtpressstoffen auf der Basis von Silikonharzen
Matériaux isolants - Stratifiés industriels rigides en planches à base de résines thermodurcissables à usages électriques - Partie 3-6: Spécifications pour matériaux particuliers - Prescriptions pour stratifiés rigides en planches à base de résine silicone
Donne les prescriptions pour les stratifiés industriels rigides en planches à usages électriques, à base de résine silicone et de différents renforts. Leurs applications et propriétés distinctives sont indiquées. Les matériaux conformes à la présente spécification satisfont aux niveaux de performances établis. Cependant, il convient que le choix d'un matériau, par un utilisateur, pour une application spécifique, soit fondé sur les prescriptions réelles nécessaires pour obtenir les performances satisfaisantes pour cette application, et qu'il ne soit pas fondé sur cette seule spécification. Dans cette révision de la série de spécifications EN 60893, de nouveaux matériaux ont été introduits, des modifications ont été faites aux prescriptions pour les propriétés de certains types existants, une nouvelle méthode pour l'essai de la permittivité et du facteur de dissipation a été ajoutée et, pour chaque type, les valeurs n'étant pas des spécifications ont été déplacées dans un nouveau document de Partie 4 - EN 60893-4: Valeurs typiques.
Izolacijski materiali - Industrijske toge laminirane plošče iz smol s toplotnim utrjevanjem za električne namene - 3-6. del: Specifikacije za posamezne materiale - Zahteve za toge laminirane plošče na osnovi silikonskih smol (IEC 60893-3-6:2003)
Podaja zahteve za industrijske toge laminirane plošče iz silikonskih smol in različnih ojačitev za električne namene. Navedene so uporabe in razločevalne lastnosti. Materiali, skladni s to specifikacijo, ustrezajo vzpostavljenim ravnem delovanja. Vendar mora uporabnik material za določeno uporabo izbrati na podlagi dejanskih zahtev za ustrezno delovanje pri takšni uporabi in ne le na podlagi same specifikacije. V tej reviziji serije specifikacij IEC 60893 so vključene nove vrste materialov, spremenjene so zahteve glede lastnosti nekaterih obstoječih vrst, dodana je nova metoda za preskušanje dielektričnosti in faktorja izgube, vsi nespecifikacijski podatki za vsako vrsto so bili prestavljeni v nov dokument, Del 4 - IEC 60893-4: Značilne vrednosti.
General Information
Relations
Standards Content (Sample)
STANDARDIzolacijski materiali - Industrijske toge laminirane plošče iz smol s toplotnim utrjevanjem za električne namene - 3-6. del: Specifikacije za posamezne materiale - Zahteve za toge laminirane plošče na osnovi silikonskih smol (IEC 60893-3-6:2003)Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes - Part 3-6: Specifications for individual materials - Requirements for rigid laminated sheets based on silicone resins (IEC 60893-3-6:2003)©
Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljenoReferenčna številkaSIST EN 60893-3-6:2004(en)ICS29.035.20
EUROPEAN STANDARD
EN 60893-3-6 NORME EUROPÉENNE EUROPÄISCHE NORM
January 2004 CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2004 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60893-3-6:2004 E
ICS 29.035.01 Supersedes EN 60893-3-6:1995
English version
Insulating materials –
Industrial rigid laminated sheets based on
thermosetting resins for electrical purposes Part 3-6: Specifications for individual materials –
Requirements for rigid laminated sheets
based on silicone resins (IEC 60893-3-6:2003)
Matériaux isolants –
Stratifiés industriels rigides en planches
à base de résines thermodurcissables
à usages électriques Partie 3-6: Spécifications pour matériaux particuliers –
Prescriptions pour stratifiés rigides
en planches à base de résine silicone (CEI 60893-3-6:2003)
Isolierstoffe –
Tafeln aus technischen Schichtpress-stoffen auf der Basis warmhärtender Harze für elektrotechnische Zwecke Teil 3-6: Bestimmungen für einzelne Werkstoffe –
Anforderungen für Tafeln aus Schichtpressstoffen auf der Basis
von Silikonharzen (IEC 60893-3-6:2003)
This European Standard was approved by CENELEC on 2003-12-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
at national level by publication of an identical
national standard or by endorsement
(dop) 2004-09-01 – latest date by which the national standards conflicting
with the EN have to be withdrawn
(dow) 2006-12-01 Annex ZA has been added by CENELEC. __________
Endorsement notice The text of the International Standard IEC 60893-3-6:2003 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 60893-3-1 NOTE Harmonized as EN 60893-3-1:2004 (not modified). __________
- 3 - EN 60893-3-6:2004
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 60893-1 - 1) Insulating materials - Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Part 1: Definitions, designations and general requirements
EN 60893-1 - 1) IEC 60893-2 2003 Part 2: Methods of test
EN 60893-2 - 1)
1) To be published.
NORME INTERNATIONALECEIIECINTERNATIONALSTANDARD 60893-3-6Deuxième éditionSecond edition2003-11Matériaux isolants – Stratifiés industriels rigides en planches à base de résines thermodurcissables à usages électriques – Partie 3-6: Spécifications pour matériaux particuliers – Prescriptions pour stratifiés rigides en planches à base de résine silicone Insulating materials – Industrial rigid laminated sheets based on thermosetting resins for electrical purposes – Part 3-6: Specifications for individual materials – Requirements for rigid laminated sheets based on silicone resins Pour prix, voir catalogue en vigueur For price, see current catalogue© IEC 2003
Droits de reproduction réservés
⎯
Copyright - all rights reservedAucune partie de cette publication ne peut être reproduite ni utilisée sous quelque forme que ce soit et par aucun procédé, électronique ou mécanique, y compris la photocopie et les microfilms, sans l'accord écrit de l'éditeur. No part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the publisher. International Electrotechnical Commission,
3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, SwitzerlandTelephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch
Web: www.iec.ch CODE PRIX PRICE CODE LCommission Electrotechnique InternationaleInternational Electrotechnical Commission
60893-3-6 © IEC:2003 – 3 – CONTENTS FOREWORD.5 INTRODUCTION.9 1 Scope.11 2 Normative references.11 3 Designation.11 4 Requirements.13Bibliography.23
60893-3-6 © IEC:2003 – 5 – INTERNATIONAL ELECTROTECHNICAL COMMISSION ___________ INSULATING MATERIALS –
INDUSTRIAL RIGID LAMINATED SHEETS BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES – Part 3-6: Specifications for individual materials −−−−Requirements for rigid laminated sheets based on silicone resins FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.