EN 50119:2020
(Main)Railway applications - Fixed installations - Electric traction overhead contact lines
Railway applications - Fixed installations - Electric traction overhead contact lines
This document applies to overhead contact line systems in heavy railways, light railways, trolley buses and industrial railways of public and private operators. This document applies to new installations of overhead contact line systems and for the complete renewal of existing overhead contact line systems. This document contains the requirements and tests for the design of overhead contact lines, requirements for structures and their structural calculations and verifications as well as the requirements and tests for the design of assemblies and individual parts. This document does not provide requirements for ground level conductor rail systems (see Figure 1).
Bahnanwendungen - Ortsfeste Anlagen - Oberleitungen für die elektrische Zugförderung
Applications ferroviaires - Installations fixes - Lignes aériennes de contact pour la traction électrique
La présente Norme européenne s'applique aux lignes aériennes de contact de traction électrique des réseaux ferrés lourds et légers, des trolleybus ainsi qu'aux réseaux industriels (publics ou privés). La présente norme s'applique aux nouvelles constructions de lignes aériennes de contact, ainsi qu'à la rénovation de portions de lignes existantes. La présente norme spécifie les exigences et les essais pour la conception des lignes aériennes de contact, les exigences relatives aux structures, leurs calculs et vérifications, ainsi que les exigences et les essais pour la conception des ensembles et des parties individuelles. La présente norme ne spécifie pas les exigences pour les systèmes à rail de contact lorsque les rails de contact sont situés à proximité des rails de roulement.
Železniške naprave - Fiksni postroji - Kontaktni vodniki električne vleke
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-julij-2020
Nadomešča:
SIST EN 50119:2009
SIST EN 50119:2009/A1:2013
Železniške naprave - Stabilne naprave električne vleke - Kontaktni vodniki
električne vleke
Railway applications - Fixed installations - Electric traction overhead contact lines
Bahnanwendungen - Ortsfeste Anlagen - Oberleitungen für den elektrischen Zugbetrieb
Applications ferroviaires - Installations fixes - Lignes aériennes de contact pour la
traction électrique
Ta slovenski standard je istoveten z: EN 50119:2020
ICS:
29.280 Električna vlečna oprema Electric traction equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN 50119
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2020
ICS 29.280 Supersedes EN 50119:2009 and all of its amendments
and corrigenda (if any)
English Version
Railway applications - Fixed installations - Electric traction
overhead contact lines
Applications ferroviaires - Installations fixes - Lignes Bahnanwendungen - Ortsfeste Anlagen - Oberleitungen für
aériennes de contact pour la traction électrique die elektrische Zugförderung
This European Standard was approved by CENELEC on 2020-01-13. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 50119:2020 E
Contents Page
European foreword . 6
1 Scope . 7
2 Normative references . 7
3 Terms, definitions, symbols and abbreviations . 11
4 Fundamental design data . 24
4.1 General . 24
4.2 Line characteristics . 25
4.3 Electrical power system design . 25
4.4 Vehicle characteristics . 26
4.5 Current collectors . 26
4.6 Environmental conditions . 26
4.7 Design life . 26
5 System requirements . 27
5.1 Design of electrical system . 27
5.1.1 General . 27
5.1.2 Temperature rise in conductors . 27
5.1.3 Clearances between live equipment and earth . 28
5.1.4 Clearances between adjacent live AC contact lines of differing voltage phases . 30
5.2 Design of current collection systems . 31
5.2.1 General . 31
5.2.2 Elasticity and its variation . 31
5.2.3 Vertical movement of contact point . 32
5.2.4 Wave propagation velocity . 32
5.2.5 Quality of current collection . 32
5.3 Mechanical design of tensioned contact wire loads . 34
5.3.1 Permissible tensile stress σ . 34
w
5.3.2 Maximum temperature Ktemp . 34
5.3.3 Allowable wear Kwear . 35
5.3.4 Wind loads Kwind . 35
5.3.5 Ice loads Kice . 35
5.3.6 Efficiency and accuracy of tensioning devices Keff . 36
5.3.7 Termination fittings Kclamp . 36
5.3.8 Joints Kjoint . 36
5.4 Mechanical design of catenary wire loads . 36
5.4.1 Permissible tensile loading Fw . 36
5.4.2 Maximum temperature Ktemp . 36
5.4.3 Wind loads Kwind . 37
5.4.4 Ice loads Kice . 37
5.4.5 Efficiency and accuracy of tensioning device Keff . 37
5.4.6 Termination fittings Kclamp . 38
5.4.7 Additional vertical load Kload . 38
5.5 Mechanical design of other stranded conductors . 38
5.6 Mechanical design of solid wires . 38
5.7 Mechanical design of ropes of non-conducting materials . 38
5.7.1 General . 38
5.7.2 Permissible tensile loading Fw . 38
5.7.3 Wind loads Kwind . 38
Ice loads K . 38
5.7.4 ice
5.7.5 Termination clamps K . 38
clamp
5.7.6 Vertical loads K . 39
load
5.7.7 Minimum bending radius K . 39
radius
5.8 Suspension systems . 39
5.9 Tensioning systems for flexible overhead contact lines . 39
5.10 Geometry of flexible overhead contact line equipment . 39
5.10.1 Lateral deviation of contact wire . 39
5.10.2 Uplift. 40
5.10.3 Variation in contact wire height . 40
5.10.4 Contact wire height . 41
5.10.5 Tolerances of lateral contact wire position . 43
5.10.6 Span length . 44
5.11 Contact line arrangement above turnouts and crossings . 44
5.12 Overlap arrangements . 44
5.13 Specific requirements for overhead contact lines for trolleybus systems . 45
5.13.1 General . 45
5.13.2 Line characteristics . 45
5.13.3 Vehicle characteristics. 46
5.13.4 Current collector system . 47
5.13.5 Static contact forces . 47
5.13.6 Trolleybus in the vicinity of tramways . 47
5.14 Tolerances and limits . 47
6 Structures and Foundations . 48
6.1 Basis of design . 48
6.1.1 General . 48
6.1.2 Basic requirements . 48
6.1.3 Design with regard to structural limit states . 49
6.1.4 Classification of actions . 49
6.1.5 Reliability levels . 50
6.1.6 Models for structural analysis and resistance . 50
6.1.7 Design values and verification methods. 50
6.1.8 Wall anchors .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.