EN 62271-105:2012

High-voltage switchgear and controlgear - Part 105: Alternating current switch-fuse combinations for rated voltages above 1 kV up to and including 52 kV

IEC 62271-105:2012 applies to three-pole units for public and industrial distribution systems which are functional assemblies of switches including switch-disconnectors and current-limiting fuses designed so as to be capable of - breaking, at the rated recovery voltage, any current up to and including the rated short-circuit breaking current; - making, at the rated voltage, circuits to which the rated short-circuit breaking current applies. It does not apply to fuse-circuit-breakers, fuse-contactors, combinations for motor-circuits or to combinations incorporating single capacitor bank switches. This second edition cancels and replaces the first edition of IEC 62271-105, published in 2002, and constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - implementation of figures at the place where they are cited first; - renumbering of tables; - addition of some of the proposals from IEC paper 17A/852/INF; - addition of missing subclauses of IEC 62271-1; - implementation of 6.105 'Extension of validity of type tests' and consequently removing of the relevant parts in the different existing clauses; - change of 7th paragraph of 6.101.4 as there is now a definition of NSDD given in 3.7.4 of IEC 62271-1:2007. Harmonization with IEC 62271-107; - some referenced clauses in other standards like IEC 60282-1 were changed and therefore changed the editions under 1.2 to the ones referred to; - addition of a new Annex C defining tolerances.

Hochspannungs-Schaltgeräte und -Schaltanlagen - Teil 105: Wechselstrom-Lastschalter-Sicherungs-Kombinationen für Bemessungsspannungen über 1 kV bis einschließlich 52 kV

Appareillage à haute tension - Partie 105: Combinés interrupteurs-fusibles pour courant alternatif de tensions assignées supérieures à 1 kV et jusqu'à 52 kV inclus

La CEI 62271-105:2012 est applicable aux appareils tripolaires utilisés dans les réseaux de distribution publics ou les installations industrielles qui forment des ensembles fonctionnels composés d'interrupteurs ou d'interrupteurs-sectionneurs et de fusibles limiteurs de courant, conçus pour être capable de - couper, à la tension de rétablissement assignée, tous les courants jusqu'au pouvoir de coupure assigné inclus; - établir, à la tension assignée, des circuits pour lesquels le pouvoir de coupure assigné s'applique. Elle ne s'applique ni aux combinés disjoncteurs-fusibles, ni aux contacteurs-fusibles, ni aux combinés destinés à la manoeuvre et à la protection des moteurs ou des batteries de condensateurs. Cette deuxième édition annule et remplace la première édition de la CEI 62271-105, publiée en 2002, et constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: - la mise en place des figures aux endroits où elles sont citées en premier; - la renumérotation des tableaux; - l'ajout, en partie, de propositions issues du document 17A/852/INF de la CEI; - l'ajout de paragraphes manquants de la CEI 62271-1; - l'introduction du 6.105 'Extension de la validité des essais de type' et en conséquence, suppression des parties correspondantes dans les différents articles existants; - la modification du septième alinéa du 6.101.4, du fait qu'il y a maintenant une définition des NSDD (décharges disruptives non soutenues) donnée au 3.7.4 de la CEI 62271 1:2007. Harmonisation avec la CEI 62271-107; - certains articles référencés dans d'autres normes, comme dans la CEI 60282-1, ont été modifiés, si bien que les éditions indiquées au 1.2 ont été modifiées en consequence; - l'ajout d'une nouvelle Annexe C définissant les tolérances.

Visokonapetostne stikalne in krmilne naprave - 105. del: Kombinacije stikal za izmenični tok z varovalkami za naznačene napetosti nad 1 kV do vključno 52 kV (IEC 62271-105:2012)

Ta del standarda IEC 62271 se uporablja za tripolne enote za javne in industrijske razdelilne sisteme, ki so funkcionalni sestavi stikal ter vključujejo ločilna stikala in tokovno omejilne varovalke, pri čemer lahko – pri naznačeni napetosti prekinejo kakršen koli tok do in vključno z naznačenim kratkostičnim prekinjenim tokom; – pri naznačeni napetosti vzpostavijo tokokroge, v zvezi s katerimi se uporablja naznačeni kratkostični prekinjeni tok. Ne uporablja se za varovalčne odklopnike, varovalčne kontaktorje, kombinacije za motorne tokokroge ali kombinacije enojnih stikal kondenzatorske baterije. V tem standardu se beseda »kombinacija« uporablja za kombinacijo, v kateri deli sestavljajo funkcionalni sestav. Vsaka zveza določene vrste stikala in določene vrste varovalke opredeljuje eno vrsto kombinacije. V praksi se lahko različne vrste varovalk kombinirajo z eno vrsto stikala, pri tem pa nastane več kombinacij z različnimi lastnostmi, zlasti v zvezi z naznačenimi tokovi. Poleg tega mora uporabnik za namene vzdrževanja poznati vrste varovalk, ki se lahko kombinirajo z določenim stikalom tako, da se skladnost s standardom ne zmanjša, in ustrezne lastnosti takšne kombinacije. Kombinacija stikala in varovalke je opredeljena z označbo vrste, seznam izbranih varovalk pa določi proizvajalec v t. i. »referenčnem seznamu varovalk«. Skladnost določene kombinacije s tem standardom pomeni, da je vsaka kombinacija, v kateri je uporabljena izbrana varovalka, dokazano skladna s tem standardom, Varovalke se vgradijo, ker je kombinacija varovalka - stikalo učinkovitejša pri prekinjanju kratkega stika kot pa samo stikalo. Opremljene so s strikerji za samodejno odpiranje vseh treh polov stikala pri delovanju varovalke in za zagotavljanje pravilnega delovanja pri vrednostih okvarnega toka, ki so nad najmanjšim talilnim tokom, vendar pod najmanjšim izklopnim tokom varovalk. Poleg strikerjev varovalk je lahko kombinacija opremljena s sprožnikom nadtoka ali sprožnikom soupora.

General Information

• Status: Published
• Publication Date: 13-Dec-2012
• Withdrawal Date: 31-Oct-2015
• ICS: 29.130.10 - High voltage switchgear and controlgear
• Technical Committee: CLC/TC 17AC - High-voltage switchgear and controlgear
• Drafting Committee: IEC/SC 17A - IEC_SC_17A
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 14-Dec-2012
• Completion Date: 14-Dec-2012
• Ref Project: SIST EN 62271-105:2013 - High-voltage switchgear and controlgear - Part 105: Alternating current switch-fuse combinations for rated voltages above 1 kV up to and including 52 kV (IEC 62271-105:2012)

Relations

• Replaces: EN 62271-105:2003 - High-voltage switchgear and controlgear - Part 105: Alternating current switch-fuse combinations
• Effective Date: 29-Jan-2023
• Replaced By: EN IEC 62271-105:2023 - High-voltage switchgear and controlgear - Part 105: Alternating current switch-fuse combinations for rated voltages above 1 kV up to and including 52 kV
• Effective Date: 05-Jun-2018

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 62271-105:2013
01-februar-2013
1DGRPHãþD
SIST EN 62271-105:2003
9LVRNRQDSHWRVWQHVWLNDOQHLQNUPLOQHQDSUDYHGHO.RPELQDFLMHVWLNDO]D
L]PHQLþQLWRN]YDURYDONDPL]DQD]QDþHQHQDSHWRVWLQDGN9GRYNOMXþQRN9
,(&
High-voltage switchgear and controlgear - Part 105: Alternating current switch-fuse
combinations for rated voltages above 1 kV up to and including 52 kV (IEC 62271-
105:2012)
Hochspannungs-Schaltgeräte und -Schaltanlagen - Teil 105: Wechselstrom-Lastschalter
-Sicherungs-Kombinationen für Bemessungsspannungen über 1 kV bis einschließlich 52
kV (IEC 62271-105:2012)
Appareillage à haute tension - Partie 105: Combinés interrupteurs-fusibles pour courant
alternatif de tensions assignées supérieures à 1 kV et jusqu'à 52 kV inclus (CEI 62271-
105:2012)
Ta slovenski standard je istoveten z: EN 62271-105:2012
ICS:
29.130.10 Visokonapetostne stikalne in High voltage switchgear and
krmilne naprave controlgear
SIST EN 62271-105:2013 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 62271-105:2013

---------------------- Page: 2 ----------------------

SIST EN 62271-105:2013

EUROPEAN STANDARD
EN 62271-105

NORME EUROPÉENNE
December 2012
EUROPÄISCHE NORM

ICS 29.130.10 Supersedes EN 62271-105:2003


English version


High-voltage switchgear and controlgear -
Part 105: Alternating current switch-fuse combinations for rated voltages
above 1 kV up to and including 52 kV
(IEC 62271-105:2012)


Appareillage à haute tension -  Hochspannungs-Schaltgeräte und -
Partie 105: Combinés interrupteurs- Schaltanlagen -
fusibles pour courant alternatif de tensions Teil 105: Wechselstrom-Lastschalter-
assignées supérieures à 1 kV et jusqu'à Sicherungs-Kombinationen für
52 kV inclus Bemessungsspannungen über 1 kV bis
(CEI 62271-105:2012) einschließlich 52 kV
(IEC 62271-105:2012)





This European Standard was approved by CENELEC on 2012-11-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62271-105:2012 E

---------------------- Page: 3 ----------------------

SIST EN 62271-105:2013
EN 62271-105:2012 - 2 -

Foreword
The text of document 17A/1013/FDIS, future edition 2 of IEC 62271-105, prepared by SC 17A, "High-
voltage switchgear and controlgear", of IEC TC 17, "Switchgear and controlgear" was submitted to the
IEC-CENELEC parallel vote and approved by CENELEC as EN 62271-105:2012.

The following dates are fixed:
(dop) 2013-08-01
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2015-11-01

standards conflicting with the
document have to be withdrawn

This document supersedes EN 62271-105:2003.
EN 62271-105:2012 includes the following significant technical changes with respect to EN 62271-
105:2003:
– implementation of figures at the place where they are cited first;
– renumbering of tables;
– addition of some of the proposals from IEC paper 17A/852/INF;
– addition of missing subclauses of EN 62271-1;
– implementation of 6.105 "Extension of validity of type tests" and consequently removing of the relevant
parts in the different existing clauses;
th
– change of 7 paragraph of 6.101.4 as there is now a definition of NSDD given in 3.7.4 of EN 62271-
1:2008. Harmonization with EN 62271-107;
– some referenced clauses in other standards
...