EN IEC 62680-1-3:2021
(Main)Universal serial bus interfaces for data and power - Part 1-3: Common components - USB Type-C® Cable and Connector Specification
Universal serial bus interfaces for data and power - Part 1-3: Common components - USB Type-C® Cable and Connector Specification
IEC 62680-1-3:2021 defines the USB Type-C™ receptacles, plug and cables. The USB Type-C Cable and Connector Specification defines a new receptacle, plug, cable and detection mechanisms that are compatible with existing USB interface electrical and functional specifications. This specification covers the following aspects that are needed to produce and use this new USB cable/connector solution in newer platforms and devices, and that interoperate with existing platforms and devices: - USB Type-C receptacles, including electro-mechanical definition and performance requirements - USB Type-C plugs and cable assemblies, including electro-mechanical definition and performance requirements - USB Type-C to legacy cable assemblies and adapters - USB Type-C-based device detection and interface configuration, including support for legacy connections - USB Power Delivery optimized for the USB Type-C connector. This specification is intended as a supplement to the existing USB 2.0, USB 3.1 and USB Power Delivery specifications. It addresses only the elements required to implement and support the USB Type-C receptacles, plugs and cables. Normative information is provided to allow interoperability of components designed to this specification. Informative information, when provided, may illustrate possible design implementations. IEC 62680-1-3:2021 cancels and replaces the third edition published in 2018 and constitutes a technical revision. New release primarily for enabling USB4 over USB Type-C connectors and cables. Also includes incorporation of all approved ECNs as of the revision date plus editorial clean-up.
Schnittstellen des Universellen Seriellen Busses für Daten und Energie - Teil 1-3: Gemeinsame Bauteile - Festlegung für USB-Typ-C®-Kabel und -Steckverbinder
Interfaces de bus universel en série pour les données et l'alimentation électrique - Partie 1-3: Composants communs - Spécification des câbles et connecteurs USB Type-C®
L'IEC 62680-1-3:2021 définit les connecteurs mâles et femelles, ainsi que les câbles USB Type-C™. La spécification des câbles et connecteurs USB Type-C est guidée par les principes suivants: - favoriser des critères de forme d'hôtes et dispositifs innovants et agréables, pour lesquels la taille, la conception industrielle et le style sont des paramètres importants; - travailler en toute fluidité à partir des solutions USB existantes pour les hôtes et dispositifs en silicium; - améliorer la facilité d'utilisation pour la connexion de dispositifs USB, en réduisant autant que possible le risque de confusion du sens d'insertion du connecteur mâle et des câbles. La spécification des câbles et connecteurs USB Type-C définit de nouvelles techniques de connexion et détection des ports et des câbles USB, compatibles avec les spécifications électriques et fonctionnelles d'interface USB existantes. La présente spécification couvre les aspects suivants, nécessaires à la production et à l'utilisation de cette nouvelle solution de câble/connecteur USB pour les plateformes et les dispositifs récents, qui interagissent avec les plateformes et les dispositifs existants: - connecteur femelle USB Type-C, y compris la description électromécanique et les exigences de performance; - connecteurs mâles et ensembles câble-connecteur USB Type-C, y compris la description électromécanique et les exigences de performance; - ensembles câble-connecteur et adaptateurs USB Type-C permettant la connexion vers les solutions existantes; - configuration d'interface et détection des dispositifs basées sur USB Type-C, y compris la prise en charge des solutions de connexion existantes; - technologie d'alimentation électrique par USB optimisée pour les connecteurs USB Type-C. La spécification des câbles et connecteurs USB Type-C définit une technique normalisée prenant en charge des modes alternatifs, tels que la reconversion du connecteur pour un usage spécifiquement lié au branchement. L'IEC 62680-1-3:2021 annule et remplace la troisième édition parue en 2018, dont elle constitue une révision technique. Nouvelle version essentiellement destinée à l'application de la spécification USB4 aux câbles et connecteurs USB Type-C. Comprend également l'incorporation de l'ensemble des ECN approuvés à la date de révision, ainsi que les corrections rédactionnelles.
Vmesniki univerzalnega serijskega vodila za prenos podatkov in napajanje - 1-3. del: Skupne komponente - Specifikacija za kable in priključke univerzalnega serijskega vodila tipa C® (IEC 62680-1-3:2021)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-2021
Nadomešča:
SIST EN IEC 62680-1-3:2019
Vmesniki univerzalnega serijskega vodila za prenos podatkov in napajanje - 1-3.
del: Skupne komponente - Specifikacija za kable in priključke univerzalnega
serijskega vodila tipa C® (IEC 62680-1-3:2021)
Universal serial bus interfaces for data and power - Part 1-3: Common components -
USB Type-C® Cable and Connector Specification (IEC 62680-1-3:2021)
Schnittstellen des Universellen Seriellen Busses für Daten und Energie - Teil 1-3:
Gemeinsame Bauteile - Festlegung für USB-Typ-CTM-Kabel und -Steckverbinder
(IEC 62680-1-3:2021)
Interfaces de bus universel en série pour les données et l'alimentation électrique - Partie
1-3: Composants communs - Spécification des câbles et connecteurs USB Type-C(r)
(IEC 62680-1-3:2021)
Ta slovenski standard je istoveten z: EN IEC 62680-1-3:2021
ICS:
35.200 Vmesniška in povezovalna Interface and interconnection
oprema equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN IEC 62680-1-3
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2021
ICS 33.120.20; 33.120.30; 35.200 Supersedes EN IEC 62680-1-3:2018 and all of its
amendments and corrigenda (if any)
English Version
Universal serial bus interfaces for data and power - Part 1-3:
Common components - USB Type-C(r) Cable and Connector
Specification
(IEC 62680-1-3:2021)
Interfaces de bus universel en série pour les données et Schnittstellen des Universellen Seriellen Busses für Daten
l'alimentation électrique - Partie 1-3: Composants communs und Energie - Teil 1-3: Gemeinsame Bauteile - Festlegung
- Spécification des câbles et connecteurs USB Type-C(r) für USB-Typ-CTM-Kabel und -Steckverbinder
(IEC 62680-1-3:2021) (IEC 62680-1-3:2021)
This European Standard was approved by CENELEC on 2021-03-23. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62680-1-3:2021 E
European foreword
The text of document 100/3439/CDV, future edition 4 of IEC 62680-1-3, prepared by IEC/TC 100
"Audio, video and multimedia systems and equipment" was submitted to the IEC-CENELEC parallel
vote and approved by CENELEC as EN IEC 62680-1-3:2021.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2021-12-23
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2024-03-23
document have to be withdrawn
This document supersedes EN IEC 62680-1-3:2018 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Endorsement notice
The text of the International Standard IEC 62680-1-3:2021 was approved by CENELEC as a
European Standard without any modification.
IEC 62680-1-3 ®
Edition 4.0 2021-02
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
colour
inside
Universal serial bus interfaces for data and power –
Part 1-3: Common components – USB Type-C® Cable and Connector
Specification
Interfaces de bus universel en série pour les données et l'alimentation
électrique –
Partie 1-3: Composants communs – Spécification des câbles et connecteurs
USB Type-C®
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 33.120.20; 33.120.30; 35.200 ISBN 978-2-8322-9337-9
– 2 – IEC 62680-1-3:2021 © IEC 2021
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
UNIVERSAL SERIAL BUS INTERFACES FOR DATA AND POWER
Part 1-3: Common components – USB Type-C® Cable and
Connector Specification
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all
national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-
operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition
to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly
Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is
entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in
this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also
participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO)
in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all interested
IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation
by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between any
IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services
carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members
of its technical committees and IEC National Committees for any personal injury, property damage or other damage
of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of
the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 62680-1-3 has been prepared by technical area 18: Multimedia home
systems and applications for end-user networks, of IEC technical committee 100: Audio, video and
multimedia systems and equipment.
The text of this standard was prepared by the USB Implementers Forum (USB-IF). The structure
and editorial rules used in this publication reflect the practice of the organization which submitted
it.
IEC 62680-1-3:2021 © IEC 2021 – 3 –
The text of this International Standard is based on the following documents:
CDV Report on voting
100/3439/CDV 100/3501/RVC
Full information on the voting for the approval of this International Standard can be found in the
report on voting indicated in the above table.
This document has been drafted in accordance with the ISO/IEC Directives, Part 2.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under "http://webstore.iec.ch" in the data related to the
specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
IMPORTANT – The "colour inside" logo on the cover page of this document indicates
that it contains colours which are considered to be useful for the correct understanding
of its contents. Users should therefore print this document using a colour printer.
– 4 – IEC 62680-1-3:2021 © IEC 2021
INTRODUCTION
The IEC 62680 series is based on a series of specifications that were originally developed by the
USB Implementers Forum (USB-IF). These specifications were submitted to the IEC under the
auspices of a special agreement between the IEC and the USB-IF.
This standard is the USB-IF publication Universal Serial Bus Type-C Cable and Connector
Specification Revision 2.0.
The USB Implementers Forum, Inc.(USB-IF) is a non-profit corporation founded by the group of
companies that developed the Universal Serial Bus specification. The USB-IF was formed to
provide a support organization and forum for the advancement and adoption of Universal Serial
Bus technology. The Forum facilitates the development of high-quality compatible USB peripherals
(devices), and promotes the benefits of USB and the quality of products that have passed
compliance testing.
ANY USB SPECIFICATIONS ARE PROVIDED TO YOU "AS IS, "WITH NO WARRANTIES
WHATSOEVER, INCLUDING ANY WARRANTY OF MERCHANTABILITY, NON-INFRINGEMENT,
OR FITNESS FOR ANY PARTICULAR PURPOSE. THE USB IMPLEMENTERS FORUM AND THE
AUTHORS OF ANY USB SPECIFICATIONS DISCLAIM ALL LIABILITY, INCLUDING LIABILITY
FOR INFRINGEMENT OF ANY PROPRIETARY RIGHTS, RELATING TO USE OR
IMPLEMENTATION OR INFORMATION IN THIS SPECIFICAITON.
THE PROVISION OF ANY USB SPECIFICATIONS TO YOU DOES NOT PROVIDE YOU WITH
ANY LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY
INTELLECTUAL PROPERTY RIGHTS.
Entering into USB Adopters Agreements may, however, allow a signing company to participate in
a reciprocal, RAND-Z licensing arrangement for compliant products. For more information, please
see:
https://www.usb.org/documents
IEC DOES NOT TAKE ANY POSITION AS TO WHETHER IT IS ADVISABLE FOR YOU TO ENTER
INTO ANY USB ADOPTERS AGREEMENTS OR TO PARTICIPATE IN THE USB IMPLEMENTERS
FORUM.”
IEC 62680-1-3:2021 © IEC 2021
Release 2.0 - 5 - USB Type-C Cable and
August 2019 Connector Specification
Universal Serial Bus
Type-C® Cable and Connector
Specification
Release 2.0
August 2019
IEC 62680-1-3:2021 © IEC 2021
Release 2.0 - 6 - USB Type-C Cable and
August 2019 Connector Specification
Apple Inc., Hewlett-Packard Inc., Intel Corporation, Microsoft
Corporation, Renesas, STMicroelectronics, and Texas Instruments
All rights reserved. ®
NOTE: Adopters may only use the USB Type-C cable and connector to implement USB or third party
functionality as expressly described in this Specification; all other uses are prohibited.
LIMITED COPYRIGHT LICENSE: The USB 3.0 Promoters grant a conditional copyright license under the
copyrights embodied in the USB Type-C Cable and Connector Specification to use and reproduce the
Specification for the sole purpose of, and solely to the extent necessary for, evaluating whether to implement
the Specification in products that would comply with the specification. Without limiting the foregoing, use of
the Specification for the purpose of filing or modifying any patent application to target the Specification or
USB compliant products is not authorized. Except for this express copyright license, no other rights or
licenses are granted, including without limitation any patent licenses. In order to obtain any additional
intellectual property licenses or licensing commitments associated with the Specification a party must execute
the USB 3.0 Adopters Agreement. NOTE: By using the Spe
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.