EN IEC 62680-1-3:2018

Universal serial bus interfaces for data and power - Part 1-3: Common components - USB Type-CTM Cable and Connector Specification

IEC 62680-1-3:2018(E) defines the USB Type-C™ receptacles, plug and cables. The USB Type-C Cable and Connector Specification defines a new receptacle, plug, cable and detection mechanisms that are compatible with existing USB interface electrical and functional specifications. This specification covers the following aspects that are needed to produce and use this new USB cable/connector solution in newer platforms and devices, and that interoperate with existing platforms and devices: - USB Type-C receptacles, including electro-mechanical definition and performance requirements - USB Type-C plugs and cable assemblies, including electro-mechanical definition and performance requirements - USB Type-C to legacy cable assemblies and adapters - USB Type-C-based device detection and interface configuration, including support for legacy connections - USB Power Delivery optimized for the USB Type-C connector. This specification is intended as a supplement to the existing USB 2.0, USB 3.1 and USB Power Delivery specifications. It addresses only the elements required to implement and support the USB Type-C receptacles, plugs and cables. Normative information is provided to allow interoperability of components designed to this specification. Informative information, when provided, may illustrate possible design implementations. This third edition cancels and replaces the second edition published in 2017 and constitutes a technical revision.

Schnittstellen des Universellen Seriellen Busses für Daten und Energie - Teil 1-3: Gemeinsame Bauteile - Festlegung für USB-Typ-CTM-Kabel und -Steckverbinder

Interfaces de bus universel en série pour les données et l'alimentation électrique - Partie 1-3: Composants communs - Spécification des câbles et connecteurs USB de type CTM

IEC 62680-1-3:2018 définit les connecteurs mâles et femelles, ainsi que les câbles USB Type-C™. La spécification des câbles et connecteurs USB Type-C est guidée par les principes suivants: - favoriser des critères de forme d'hôtes et dispositifs innovants et agréables, pour lesquels la taille, la conception industrielle et le style sont des paramètres importants; - travailler en toute fluidité à partir des solutions USB existantes pour les hôtes et dispositifs en silicium; - améliorer la facilité d'utilisation pour la connexion de dispositifs USB, en réduisant autant que possible le risque de confusion du sens d'insertion du connecteur mâle et des câbles. La spécification des câbles et connecteurs USB Type-C définit de nouvelles techniques de connexion et détection des ports et des câbles USB, compatibles avec les spécifications électriques et fonctionnelles d'interface USB existantes. La présente spécification couvre les aspects suivants, nécessaires à la production et à l'utilisation de cette nouvelle solution de câble/connecteur USB pour les plateformes et les dispositifs récents, qui interagissent avec les plateformes et les dispositifs existants: - connecteur femelle USB Type-C, y compris la description électromécanique et les exigences de performance; - connecteurs mâles et ensembles câble-connecteur USB Type-C, y compris la description électromécanique et les exigences de performance; - ensembles câble-connecteur et adaptateurs USB Type-C permettant la connexion vers les solutions existantes; - configuration d'interface et détection des dispositifs basées sur USB Type-C, y compris la prise en charge des solutions de connexion existantes; - technologie d'alimentation électrique par USB optimisée pour les connecteurs USB Type-C. La spécification des câbles et connecteurs USB Type-C définit une technique normalisée prenant en charge des modes alternatifs, tels que la reconversion du connecteur pour un usage spécifiquement lié au branchement. IEC 62680-1-3:2018 annule et remplace la deuxième édition parue en 2017, dont elle constitue une révision technique.

Vmesniki univerzalnega serijskega vodila za prenos podatkov in napajanje - 1-3. del: Skupne komponente - Specifikacija za kable in priključke univerzalnega serijskega vodila tipa CTM (IEC 62680-1-3:2018)

Ta specifikacija je namenjena za uporabo kot dopolnilo k obstoječim specifikacijam za USB 2.0, USB 3.1 in zagotavljanje napajanja prek USB. Obravnava samo elemente, potrebne za uporabo vtičnic, vtičev in kablov USB tipa C ter njihovo podporo.
Normativne informacije so podane za namene zagotavljanja interoperabilnosti sestavnih delov, izdelanih v skladu s to specifikacijo. Informativne informacije (če so podane) lahko ponazarjajo možne načine načrtovane uporabe.

General Information

• Status: Withdrawn
• Publication Date: 16-Aug-2018
• Withdrawal Date: 27-Jun-2021
• ICS: 33.120.20 - Wires and symmetrical cables
• ICS: 33.120.30 - RF connectors
• ICS: 35.200 - Interface and interconnection equipment
• Technical Committee: CLC/TC 100X - Audio, video and multimedia systems and equipment and related sub-systems
• Drafting Committee: IEC/TC 100 - IEC_TC_100
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 23-Mar-2024
• Completion Date: 23-Mar-2024
• Ref Project: SIST EN IEC 62680-1-3:2019 - Universal serial bus interfaces for data and power - Part 1-3: Common components - USB Type-CTM Cable and Connector Specification (IEC 62680-1-3:2018)

Relations

• Replaces: EN 62680-1-3:2017 - Universal serial bus interfaces for data and power - Part 1-3: Common components - USB Type-CTM Cable and Connector Specification
• Effective Date: 21-Aug-2018
• Replaced By: EN IEC 62680-1-3:2021 - Universal serial bus interfaces for data and power - Part 1-3: Common components - USB Type-C® Cable and Connector Specification
• Effective Date: 26-May-2020

Standards Content (Sample)

SLOVENSKI STANDARD
01-februar-2019
9PHVQLNLXQLYHU]DOQHJDVHULMVNHJDYRGLOD]DSUHQRVSRGDWNRYLQQDSDMDQMH
GHO6NXSQHNRPSRQHQWH6SHFLILNDFLMD]DNDEOHLQSULNOMXþNHXQLYHU]DOQHJD
VHULMVNHJDYRGLODWLSD&70,(&
Universal serial bus interfaces for data and power - Part 1-3: Common components -
USB Type-CTM Cable and Connector Specification (IEC 62680-1-3:2018)
6FKQLWWVWHOOHQGHV8QLYHUVHOOHQ6HULHOOHQ%XVVHVIU'DWHQXQG(QHUJLH7HLO
*HPHLQVDPH%DXWHLOH)HVWOHJXQJIU86%7\S&70.DEHOXQG6WHFNYHUELQGHU
,(&
Interfaces de bus universel en série pour les données et l'alimentation électrique - Partie
1-3: Composants communs - Spécification des câbles et connecteurs USB de type CTM
(IEC 62680-1-3:2018)
Ta slovenski standard je istoveten z: EN IEC 62680-1-3:2018
ICS:
35.200 Vmesniška in povezovalna Interface and interconnection
oprema equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 62680-1-3

NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2018
ICS 33.120.20; 33.120.30; 35.200 Supersedes EN 62680-1-3:2017
English Version
Universal serial bus interfaces for data and power -
TM
Part 1-3: Common components - USB Type-C Cable and
Connector Specification
(IEC 62680-1-3:2018)
Interfaces de bus universel en série pour les données et Schnittstellen des Universellen Seriellen Busses für Daten
l'alimentation électrique - Partie 1-3: Composants communs und Energie - Teil 1-3: Gemeinsame Bauteile - Festlegung
TM TM
- Spécification des câbles et connecteurs USB de type C für USB-Typ-C -Kabel und -Steckverbinder
(IEC 62680-1-3:2018) (IEC 62680-1-3:2018)
This European Standard was approved by CENELEC on 2018-06-28. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,
Switzerland, Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62680-1-3:2018 E

European foreword
The text of document 100/3011/CDV, future edition 3 of IEC 62680-1-3, prepared by Technical
Area 14 "Interfaces and methods of measurement for personal computing equipment" of IEC/TC 100
"Audio, video and multimedia systems and equipment" was submitted to the IEC-CENELEC parallel
vote and approved by CENELEC as EN IEC 62680-1-3:2018.

The following dates are fixed:
• latest date by which the document has to be (dop) 2019-03-28
implemented at national level by
publication of an identical national
standard or by endorsement
(dow) 2021-06-28
• latest date by which the national
standards conflicting with the
document have to be withdrawn
This document supersedes EN 62680-1-3:2017.

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice
The text of the International Standard IEC 62680-1-3:2018 was approved by CENELEC as a
European Standard without any modification.
IEC 62680-1-3 ®
Edition 3.0 2018-05
INTERNATIONAL
STANDARD
colour
inside
Universal serial bus interfaces for data and power –

Part 1-3: Common components – USB Type-C™ Cable and Connector

Specification
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
ICS 33.120.20; 33.120.30; 35.200 ISBN 978-2-8322-5749-4

– 2 – IEC 62680-1-3:2018 © IEC 2018
© USB-IF:2017
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
UNIVERSAL SERIAL BUS INTERFACES FOR DATA AND POWER –

Part 1-3: Common components –
TM
USB Type-C Cable and Connector Specification

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all
national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-
operation on all questions concerning standardization in the electrical and electronic fields. To this end and in
addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation
is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may
participate in this preparatory work. International, governmental and non-governmental organizations liaising with
the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all interested
IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses
arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 62680-1-3 has been prepared by technical area 14: Interfaces and
methods of measurement for personal computing equipment, of IEC technical committee 100:
Audio, video and multimedia systems and equipment.
This third edition cancels and replaces the second edition published in 2017 and constitutes a
technical revision.
The text of this standard was prepared by the USB Implementers Forum (USB-IF). The structure
and editorial rules used in this publication reflect the practice of the organization which submitted
it.
IEC 62680-1-3:2018 © IEC 2018 – 3 –
© USB-IF:2017
The text of this International Standard is based on the following documents:
CDV Report on voting
100/3011/CDV 100/3099/RVC
Full information on the voting for the approval of this International Standard can be found in the
report on voting indicated in the above table.
The committee has decided that the contents of this document will remain unchanged until the
stability date indicated on the IEC website under "http://webstore.iec.ch" in the data related to the
specific document. At this date, the document will be
• reconfirmed,
• withdrawn,
• replaced by a revised edition, or
• amended.
IMPORTANT – The 'colour inside' logo on the cover page of this publication indicates
that it contains colours which are considered to be useful for the correct
understanding of its contents. Users should therefore print this document using a
colour printer.
– 4 – IEC 62680-1-3:2018 © IEC 2018
© USB-IF:2017
INTRODUCTION
The IEC 62680 series is based on a series of specifications that were originally developed by the
USB Implementers Forum (USB-IF). These specifications were submitted to the IEC under the
auspices of a special agreement between the IEC and the USB-IF.
This standard is the USB-IF publication USB Type-C™ Cable and Connector Specification
Revision 1.3 as of July 14, 2017.
The USB Implementers Forum, Inc.(USB-IF) is a non-profit corporation founded by the group of
companies that developed the Universal Serial Bus specification. The USB-IF was formed to
provide a support organization and forum for the advancement and adoption of Universal Serial
Bus technology. The Forum facilitates the development of high-quality compatible USB
peripherals (devices), and promotes the benefits of USB and the quality of products that have
passed compliance testing.
ANY USB SPECIFICATIONS ARE PROVIDED TO YOU "AS IS, "WITH NO WARRANTIES
WHATSOEVER, INCLUDING ANY WARRANTY OF MERCHANTABILITY, NON-INFRINGEMENT,
OR FITNESS FOR ANY PARTICULAR PURPOSE. THE USB IMPLEMENTERS FORUM AND
THE AUTHORS OF ANY USB SPECIFICATIONS DISCLAIM ALL LIABILITY, INCLUDING
LIABILITY FOR INFRINGEMENT OF ANY PROPRIETARY RIGHTS, RELATING TO USE OR
IMPLEMENTATION OR INFORMATION IN THIS SPECIFICAITON.
THE PROVISION OF ANY USB SPECIFICATIONS TO YOU DOES NOT PROVIDE YOU WITH
ANY LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY
INTELLECTUAL PROPERTY RIGHTS.
Entering into USB Adopters Agreements may, however, allow a signing company to participate in
a reciprocal, RAND-Z licensing arrangement for compliant products. For more information, please
see:
http://www.usb.org/developers/docs/
http://www.usb.org/developers/devclass_docs#approved
IEC DOES NOT TAKE ANY POSITION AS TO WHETHER IT IS ADVISABLE FOR YOU TO
ENTER INTO ANY USB ADOPTERS AGREEMENTS OR TO PARTICIPATE IN THE USB
IMPLEMENTERS FORUM.”
IEC 62680-1-3:2018 © IEC 2018 – 5 –
© USB-IF:2017
Universal Serial Bus
Type-C Cable and
Connector Specification
Release 1.3
July 14, 2017
– 6 – IEC 62680-1-3:2018 © IEC 2018
© USB-IF:2017
Apple Inc., Hewlett-Packard Inc., Intel Corporation, Microsoft
Corporation, Renesas, STMicroelectronics, and Texas Instruments
All rights reserved.
NOTE: Adopters may only use the USB Type-C™ cable and connector to implement USB or third party
functionality as expressly described in this Specification; all other uses are prohibited.
LIMITED COPYRIGHT LICENSE: The USB 3.0 Promoters grant a conditional copyright license under the
copyrights embodied in the USB Type-C Cable and Connector Specification to use and reproduce the
Specification for the sole purpose of, and solely to the extent necessary for, evaluating whether to
implement the Specification in products that would comply with the specification. Without limiting the
foregoing, use of the Specification for the purpose of filing or modifying any patent application to target the
Specification or USB compliant products is not authorized. Except for this express copyright license, no
other rights or licenses are granted, including without limitation any patent licenses. In order to obtain any
additional intellectual property licenses or licensing commitments associated with the Specification a party
must execute the USB 3.0 Adopters Agreement. NOTE: By using the Specification, you accept these
license terms on your own behalf and, in the case where you are doing this as an employee, on behalf of
your employer.
INTELLECTUAL PROPERTY DISCLAIMER
THIS SPECIFICATION IS PROVIDED TO YOU “AS IS” WITH NO WARRANTIES WHATSOEVER,
INCLUDING ANY WARRANTY OF MERCHANTABILITY, NON-INFRINGEMENT, OR FITNESS
FOR ANY PARTICULAR PURPOSE. THE AUTHORS OF THIS SPECIFICATION DISCLAIM ALL
LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PROPRIETARY RIGHTS,
RELATING TO USE OR IMPLEMENTATION OF INFORMATION IN THIS SPECIFICATION. THE
PROVISION OF THIS
...