EN 61326-2-1:2013

Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-1: Particular requirements - Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications

IEC 61326-2-1:2012 specifies more detailed test configurations, operational conditions and performance criteria for equipment with test and measurement circuits (both internal and/or external to the equipment) that are not EMC protected for operational and/or functional reasons, as specified by the manufacturer. This second edition cancels and replaces the first edition published in 2005. This edition constitutes a technical revision. The main technical changes are: Update with respect to IEC 61326-1:2012.

Elektrische Mess-, Steuer-, Regel- und Laborgeräte – EMV-Anforderungen – Teil 2-1: Besondere Anforderungen – Prüfanordnung, Betriebsbedingungen und Leistungsmerkmale für empfindliche Prüf- und Messgeräte für Anwendungen ohne EMV-Schutzmaßnahmen

Matériel électrique de mesure, de commande et de laboratoire - Exigences relatives à la CEM - Partie 2-1: Exigences particulières - Configurations d'essai, conditions fonctionnelles et critères de performance pour essai de sensibilité et équipement de mesures pour les applications non protégées de la CEM

La CEI 61326-2-1:2012 donne des spécifications plus détaillées des configurations d'essai, des conditions fonctionnelles et des critères de performance pour les matériels avec des circuits d'essai et de mesure (internes et/ou externes au matériel) qui n'ont pas de protection CEM pour des raisons fonctionnelles, comme spécifié par le fabricant. Cette deuxième édition annule et remplace la première édition parue en 2005. Cette édition constitue une révision technique. Les principaux changements techniques sont: Mise à jour par rapport à la CEI 61326-1:2012.

Električna oprema za merjenje, kontrolo in laboratorijsko uporabo - Zahteve za elektromagnetno združljivost (EMC) - 2-1. del: Posebne zahteve - Preskusne konfiguracije, obratovalni pogoji in merila za lastnosti občutljive preskuševalne in merilne opreme za aplikacije v razmerah brez zaščite proti elektromagnetnim motnjam EMC (IEC 61326-2-1:2012)

Poleg področja uporabe standarda IEC 61326-1 ta del standarda IEC 61326 določa podrobnejše preskusne konfiguracije, obratovalne pogoje in merila za lastnosti opreme s preskuševalnimi in merilnimi tokokrogi (vgrajenimi v opremo ali ne), ki niso zaščiteni pred elektromagnetnimi motnjami, in sicer zaradi obratovalnih in/ali funkcionalnih razlogov, kot določa proizvajalec. Proizvajalec določi okolje, v katerem naj bi se izdelek uporabljal, in izbere ustrezne specifikacije preskusne ravni iz standarda IEC 61326-1.

General Information

• Status: Published
• Publication Date: 10-Jan-2013
• Withdrawal Date: 05-Nov-2015
• ICS: 17.220 - Electricity. Magnetism. Electrical and magnetic measurements
• ICS: 25.040.40 - Industrial process measurement and control
• ICS: 33.100 - Electromagnetic compatibility (EMC)
• Technical Committee: CLC/TC 65X - Industrial-process measurement, control and automation
• Drafting Committee: IEC/SC 65A - IEC_SC_65A
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 11-Jan-2013
• Completion Date: 11-Jan-2013
• Directive: 2004/108/EC - Directive 2004/108/EC of the European Parliament and of the Council of 15 December 2004 on the approximation of the laws of the Member States relating to electromagnetic compatibility and repealing Directive 89/336/EEC
• Directive: 2004/108/EU - DIRECTIVE 2004/108/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 15 December 2004 on the approximation of the laws of the Member States relating to electromagnetic compatibility and repealing Directive 89/336/EEC
• Directive: 2014/30/EU - Directive 2014/30/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to electromagnetic compatibility (recast)
• Ref Project: SIST EN 61326-2-1:2013 - Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-1: Particular requirements - Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications (IEC 61326-2-1:2012)

Relations

• Replaces: EN 61326-2-1:2006 - Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-1: Particular requirements - Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications
• Effective Date: 28-Jan-2023
• Replaced By: EN IEC 61326-2-1:2021 - Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-1: Particular requirements - Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications
• Effective Date: 25-Jan-2023

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.3UHVNXVQHRPDJQHWQLPElektrische Mess-, Steuer-, Regel- und Laborgeräte – EMV-Anforderungen – Teil 2-1: Besondere Anforderungen - Prüfanordnung, Betriebsbedingungen und Leistungsmerkmale für empfindliche Prüf- und Messgeräte für Anwendungen ohne EMV-Schutzmaßnahmen (IEC 61326-2-1:2012Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-1: Particular requirements - Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications (IEC 61326-2-1:2012)01-marec-2013SIST EN 61326-2-1:2013SLOVENSKI
STANDARDSIST EN 61326-2-1:20071DGRPHãþD



2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Matériel électrique de mesure, de commande et de laboratoire - Exigences relatives à la CEM - Partie 2-1: Exigences particulières - Configurations d'essai, conditions fonctionnelles et critères de performance pour essai de sensibilité et équipement de mesures pour les applications non protégées de la CEM (CEI 61326-2-1:201233.100.01Elektromagnetna združljivost na splošnoElectromagnetic compatibility in general19.080SUHVNXãDQMHElectrical and electronic testingICS:SIST EN 61326-2-1:2013enTa slovenski standard je istoveten z:EN 61326-2-1:2013SIST EN 61326-2-1:2013



SIST EN 61326-2-1:2013



EUROPEAN STANDARD EN 61326-2-1 NORME EUROPÉENNE
EUROPÄISCHE NORM January 2013
CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2013 CENELEC -
All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61326-2-1:2013 E
ICS 17.220; 25.040.40; 33.100 Supersedes EN 61326-2-1:2006
English version
Electrical equipment for measurement, control and laboratory use -
EMC requirements -
Part 2-1: Particular requirements -
Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications (IEC 61326-2-1:2012)
Matériel électrique de mesure, de commande et de laboratoire -
Exigences relatives à la CEM -
Partie 2-1: Exigences particulières -
Configurations d'essai, conditions fonctionnelles et critères de performance pour essai de sensibilité et équipement de mesures pour les applications non protégées de la CEM (CEI 61326-2-1:2012)
Elektrische Mess-, Steuer-, Regel- und Laborgeräte – EMV-Anforderungen – Teil 2-1: Besondere Anforderungen – Prüfanordnung, Betriebsbedingungen und Leistungsmerkmale für empfindliche Prüf- und Messgeräte für Anwendungen ohne EMV-Schutzmaßnahmen (IEC 61326-2-1:2012)
This European Standard was approved by CENELEC on 2012-11-06. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
SIST EN 61326-2-1:2013



EN 61326-2-1:2013 - 2 -
Foreword The text of document 65A/641/FDIS, future edition 2 of IEC 61326-2-1, prepared by SC 65A, "System aspects", of IEC TC 65, "Industrial-process measurement, control and automation" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61326-2-1:2013.
The following dates are fixed: • latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2013-08-06 • latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2015-11-06
This document supersedes EN 61326-2-1:2006. EN 61326-2-1:2013 includes the following significant technical changes with respect to EN 61326-2-1:2006: – Update with respect to EN 61326-1:2013. EN 61326-2-1:2013 is to be used in conjunction with EN 61326-1:2013 and follows the same numbering of clauses, subclauses, tables and figures.
...