EN 60127-4:2005/A2:2013
(Amendment)Miniature fuses - Part 4: Universal modular fuse-links (UMF) - Through-hole and surface mount types
Miniature fuses - Part 4: Universal modular fuse-links (UMF) - Through-hole and surface mount types
DOP = DAV + 6 months (D139/C142)
Geräteschutzsicherungen - Teil 4: Welteinheitliche modulare Sicherungseinsätze (UMF) - Bauarten für Steck- und Oberflächenmontage
Coupe-circuit miniatures - Partie 4: Eléments de remplacement modulaires universels (UMF) - Types de montage en surface et montage par trous
Miniaturne varovalke - 4. del: Univerzalni modularni taljivi vložki - Skoznji vložki in vložki za površinsko montažo (IEC 60127-4:2005/A2:2012)
Ta del standarda IEC 60127 se nanaša na univerzalne modularne taljive vložke (UMF) za tiskane tokokroge in sisteme z drugo podlago, ki se uporabljajo za zaščito električnih aparatov, elektronske opreme in delov njenih komponent, ki so namenjeni za notranjo uporabo. Ne velja za taljive vložke za aparate, namenjene uporabi pod posebnimi pogoji, npr. v korozivni ali eksplozivni atmosferi. Te varovalke morajo običajno montirati ali zamenjati samo ustrezno usposobljene osebe s posebno opremo. Taljivi vložki za uporabo v držalih varovalk so v obravnavi. Ta standard se poleg tega uporablja za zahteve iz standarda IEC 60127-1. Cilji tega dela standarda IEC 60127 so enaki, kot je določeno v standardu IEC 60127-1, z dodatno zahtevo stopnje nezmožnosti zamenljivosti.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2013
Miniaturne varovalke - 4. del: Univerzalni modularni taljivi vložki - Skoznji vložki in
vložki za površinsko montažo (IEC 60127-4:2005/A2:2012)
Miniature fuses - Part 4: Universal modular fuse-links (UMF) - Through-hole and surface
mount types (IEC 60127-4:2005/A2:2012)
Geräteschutzsicherungen - Teil 4: Welteinheitliche modulare Sicherungseinsätze (UMF)
- Bauarten für Steck- und Oberflächenmontage (IEC 60127-4:2005/A2:2012)
Coupe-circuit miniatures - Partie 4: Eléments de remplacement modulaires universels
(UMF) - Types de montage en surface et montage par trous (CEI 60127-
4:2005/A2:2012)
Ta slovenski standard je istoveten z: EN 60127-4:2005/A2:2013
ICS:
29.120.50 9DURYDONHLQGUXJD Fuses and other overcurrent
PHGWRNRYQD]DãþLWD protection devices
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 60127-4/A2
NORME EUROPÉENNE
June 2013
EUROPÄISCHE NORM
ICS 29.120.50
English version
Miniature fuses -
Part 4: Universal modular fuse-links (UMF) -
Through-hole and surface mount types
(IEC 60127-4:2005/A2:2012)
Coupe-circuit miniatures - Geräteschutzsicherungen -
Partie 4: Eléments de remplacement Teil 4: Welteinheitliche modulare
modulaires universels (UMF) - Sicherungseinsätze (UMF) -
Types de montage en surface et montage Bauarten für Steck- und
par trous Oberflächenmontage
(CEI 60127-4:2005/A2:2012) (IEC 60127-4:2005/A2:2012)
This amendment A2 modifies the European Standard EN 60127-4:2005; it was approved by CENELEC on
2013-01-11. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this amendment the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.
This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2013 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60127-4:2005/A2:2013 E
Foreword
The text of document 32C/456/CDV, future amendment 2 to edition 3 of IEC 60127-4, prepared by
SC 32C "Miniature fuses" of IEC/TC 32 "Fuses" was submitted to the IEC-CENELEC parallel vote and
approved by CENELEC as EN 60127-4:2005/A2:2013.
The following dates are fixed:
(dop) 2013-12-21
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2016-01-11
standards conflicting with the
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
This standard covers the Principle Elements of the Safety Objectives for Electrical Equipment
Designed for Use within Certain Voltage Limits (LVD - 2006/95/EC).
Endorsement notice
The text of the International Standard IEC 60127-4:2005/A2:2012 was approved by CENELEC as a
European Standard without any modification.
- 3 - EN 60127-4:2005/A2:2013
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
Replacement in Annex ZA of EN 60127-4:2005:
Publication Year Title EN/HD Year
Replace the reference to IEC 60068-2-20:19
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.