FprEN IEC 81355-1:2024
(Main)Industrial systems, installations and equipment and industrial products - Classification and designation of information - Part 1: Basic rules and classification of information
Industrial systems, installations and equipment and industrial products - Classification and designation of information - Part 1: Basic rules and classification of information
Klassifikation und Kennzeichnung von Dokumenten für Anlagen, Systeme und Ausrüstungen – Teil 1: Regeln und Tabellen zur Klassifikation
Systèmes, installations et appareils, et produits industriels - Classification et désignation des informations - Partie 1: Règles de base et classification des informations
Klasifikacija in označevanje dokumentov za naprave, sisteme in opremo - 1. del: Pravila in klasifikacijske preglednice
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN IEC 81355-1:2023
01-januar-2023
Klasifikacija in označevanje dokumentov za naprave, sisteme in opremo - 1. del:
Pravila in klasifikacijske preglednice
Classification and designation of documents for plants, systems and equipment - Part 1:
Rules and classification tables
Classification et désignation des documents pour installations industrielles, systèmes et
matériels - Partie 1: Règles et tableaux de classification
Ta slovenski standard je istoveten z: prEN IEC 81355-1:2022
ICS:
01.080.01 Grafični simboli na splošno Graphical symbols in general
oSIST prEN IEC 81355-1:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
oSIST prEN IEC 81355-1:2023
oSIST prEN IEC 81355-1:2023
3/1597/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 81355-1 ED1
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2022-11-25 2023-02-17
SUPERSEDES DOCUMENTS:
3/1535/CD, 3/1547A/CC
IEC TC 3 : DOCUMENTATION, GRAPHICAL SYMBOLS AND REPRESENTATIONS OF TECHNICAL INFORMATION
SECRETARIAT: SECRETARY:
Sweden Mr Mikael Törnkvist
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
TC 8,TC 9,SC 17C,TC 22,SC 22F,SC 22H,TC
31,TC 44,SC 45A,TC 57,TC 64,TC 65,SC 65A,SC
Other TC/SCs are requested to indicate their interest, if
65E,TC 69,TC 82,TC 88,TC 120,SC 121A,SC
any, in this CDV to the secretary.
121B,TC 122,PC 126,PC 127,SyC SM,SyC Smart
Cities,SyC Smart Energy,ISO/IEC JTC 1/SC 25
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of
which they are aware and to provide supporting documentation.
TITLE:
Classification and designation of documents for plants, systems and equipment - Part 1: Rules
and classification tables
PROPOSED STABILITY DATE: 2026
NOTE FROM TC/SC OFFICERS:
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.
oSIST prEN IEC 81355-1:2023
oSIST prEN IEC 81355-1:2023
– 2 – IEC CDV 81355-1 IEC:2022
1 FOREWORD . 4
2 INTRODUCTION . 6
3 1 Scope . 8
4 2 Normative references . 8
5 3 Terms and definitions . 8
6 4 General concepts . 10
7 4.1 General . 10
8 4.2 Classification principles . 12
9 5 Designation of information containers . 12
10 General . 12
5.1
11 5.2 Designation of an information container . 13
12 5.3 Relating information containers to an object . 13
13 5.4 Structuring and designation of multiple information containers . 14
14 5.5 Identification of documents . 16
15 5.6 Information for identification purposes . 16
16 Documentation . 16
17 6.1 General . 16
18 6.2 Moving from DCC to ICC . 17
19 Annex A (informative) Information model . 18
20 A.1 General . 18
21 A.2 UML model . 18
22 A.3 Entity descriptions . 19
23 A.3.1 ObjectOfInterest . 19
24 Information . 20
A.3.2
25 A.3.3 Context . 20
26 A.3.4 Data . 21
27 A.3.5 InformationContainer . 21
28 A.3.6 Document . 21
29 A.3.7 Documentation . 22
30 ICC . 22
A.3.8
31 A.3.9 ClassOfInformation . 22
32 A.3.10 ClassificationScheme . 23
33 A.4 Enumeration - IEC81355ClassificationDomain . 23
34 Enumeration - IEC81355DocumentForms . 23
A.5
35 Annex B (normative) Information class codes . 25
36 Annex C (informative) Additional information about document kinds for communication
37 purposes . 32
38 C.1 Form of presentation . 32
39 Annex D (informative) From Document Code Class (DCC) to Information Code Class
40 (ICC) . 34
41 D.1 General . 34
42 D.2 Comparison of DCC vs. ICC . 34
43 Bibliography . 44
45 Table B.2 – Entry class for information class codes (first letter code L1) . 25
46 Table B.2 – Subclasses for information class codes (first and second letter code) . 26
oSIST prEN IEC 81355-1:2023
81355-1 IEC:202x – 3 –
47 Table C.1 – Letter code for basic document kinds and forms of presentation . 32
48 Table D.1 – DCC data position A2 vs. ICC entry class code L1. . 35
49 Table D.2 – DCC data position A3 vs. ICC subclass code L2. . 37
oSIST prEN IEC 81355-1:2023
– 4 – IEC CDV 81355-1 IEC:2022
51 INTERNATIONAL ELECTROTECHNICAL COMMISSION
52 ____________
54 INDUSTRIAL SYSTEMS,
55 INSTALLATIONS AND EQUIPMENT AND INDUSTRIAL PRODUCTS -
56 CLASSIFICATION AND DESIGNATION OF INFORMATION
58 Part 1: Basic rules and classification of information
62 FOREWORD
63 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
64 all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
65 co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
66 in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
67 Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
68 preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
69 may participate in this preparatory work. International, governmental and non-governmental organizations liaising
70 with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
71 Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
72 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
73 consensus of opinion on the relevant subjects since each technical committee has representation from all
74 interested IEC National Committees.
75 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
76 Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
77 Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
78 misinterpretation by any end user.
79 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
80 transparently to the maximum extent possible in their national and regional publications. Any divergence between
81 any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
82 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
83 assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
84 services carried out by independent certification bodies.
85 6) All users should ensure that they have the latest edition of this publication.
86 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
87 members of its technical committees and IEC National Committees for any personal injury, property damage or
88 other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
89 expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
90 Publications.
91 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
92 indispensable for the correct application of this publication.
93 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
94 rights. IEC shall not be held responsible for identifying any or all such patent rights.
95 IEC 81355-1 has been prepared by IEC technical committee 3: Documentation, graphical
96 symbols and representations of technical information, in close cooperation with ISO technical
97 committee 10: Technical product documentation. It is an International Standard.
98 It is published as a double logo standard and has the status of a horizontal publication in
99 accordance with IEC Guide 108.
100 This edition cancels and replaces the second edition of IEC 61355-1 published in 2008. This
101 edition constitutes a technical revision.
102 This edition includes the following significant technical changes with respect to the previous
103 edition:
104 a) …to be completed
oSIST prEN IEC 81355-1:2023
81355-1 IEC:202x – 5 –
106 The text of this standard is based on the following documents:
CD Report on voting
3/xxx/CD 3/xxx/RVD
108 Full information on the voting for its approval can be found in the report on voting indicated in
109 the above table. In ISO, the standard has been approved by xx members out of xx having cast
110 a vote.
111 The language used for the development of this International Standard is English.
112 A list of parts of the 81355 International Standard, published under the general title Industrial
113 systems, installations and equipment and industrial products – Classification and designation
114 of information, can be found on the IEC website.
115 This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in
116 accordance with ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC Supplement, available
117 at www.iec.ch/members_experts/refdocs. The main document types developed by IEC are
118 described in greater detail at www.iec.ch/standardsdev/publications.
119 In this document, italic type is used as follows:
120 • terms defined in Clause 3 (applies to the text
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.