EN IEC 62561-1:2023
(Main)Lightning protection system components (LPSC) - Part 1: Requirements for connection components
Lightning protection system components (LPSC) - Part 1: Requirements for connection components
IEC 62561-1:2023 is available as IEC 62561-1:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 62561-1:2023 specifies the requirements and tests for metallic connection components that form part of a lightning protection system (LPS). Typically, these can be connectors, clamps, bonding and bridging components, expansion pieces and test joints. This third edition cancels and replaces the second edition published in 2017. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) definitions of connection types mentioned in the scope have been added; b) location classification has been expanded in detail; c) the document has been updated in line with the new edition of ISO 22479:2019 on humid sulphurous atmosphere treatment; d) a new normative Annex E for reduced test procedures has been introduced.
Blitzschutzsystembauteile (LPSC) - Teil 1: Anforderungen an Verbindungsbauteile
Composants des systèmes de protection contre la foudre (CSPF) - Partie 1: Exigences pour les composants de connexion
IEC 62561-1:2023 est disponible sous forme de IEC 62561-1:2023 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.L'IEC 62561-1:2023 spécifie les exigences et les essais applicables aux composants métalliques de connexion qui font partie d'un système de protection contre la foudre (SPF). Il peut s'agir, en général, des connecteurs, des colliers de serrage, des composants de collage et de pontage, des pièces de dilatation et des joints de contrôle. Cette troisième édition annule et remplace la deuxième édition parue en 2017. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: a) les définitions des types de connexions mentionnés dans le domaine d'application du document ont été ajoutées; b) la classification des emplacements a été développée de façon détaillée; c) le document a été mis à jour conformément à la nouvelle édition de l'ISO 22479:2019 concernant le traitement en atmosphère humide sulfureuse; d) la nouvelle Annexe E normative concernant les procédures d'essai simplifiées a été introduite.
Elementi za zaščito pred strelo (LPSC) - 1. del: Zahteve za spojne komponente (IEC 62561-1:2023)
Ta del standarda IEC 62561 določa zahteve in preskuse za kovinske spojne komponente, ki so del sistema za zaščito pred strelo (LPS). Običajno so to lahko konektorji, spojke, vezne in premostitvene komponente, ekspanzijski kosi in preskusni spoji.
Za namene tega dokumenta se kot spojne komponente obravnavajo naslednje vrste spojev: eksotermni, spajkani, varjeni, spajani, stiskani, spojeni, vijačeni ali netani.
Preskušanje komponent za eksplozivno atmosfero v tem dokumentu ni zajeto.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN IEC 62561-1:2023
01-julij-2023
Elementi za zaščito pred strelo (LPSC) - 1. del: Zahteve za spojne komponente
(IEC 62561-1:2023)
Lightning protection system components (LPSC) - Part 1: Requirements for connection
components (IEC 62561-1:2023)
Blitzschutzsystembauteile (LPSC) - Teil 1: Anforderungen an Verbindungsbauteile (IEC
62561-1:2023)
Composants des systèmes de protection contre la foudre (CSPF) - Parte 1: Exigences
pour les composants de connexion (IEC 62561-1:2023)
Ta slovenski standard je istoveten z: EN IEC 62561-1:2023
ICS:
29.120.20 Spojni elementi Connecting devices
91.120.40 Zaščita pred strelo Lightning protection
SIST EN IEC 62561-1:2023 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN IEC 62561-1:2023
---------------------- Page: 2 ----------------------
SIST EN IEC 62561-1:2023
EUROPEAN STANDARD EN IEC 62561-1
NORME EUROPÉENNE
EUROPÄISCHE NORM May 2023
ICS 29.020; 91.120.40 Supersedes EN 62561-1:2017
English Version
Lightning protection system components (LPSC) - Part 1:
Requirements for connection components
(IEC 62561-1:2023)
Composants des systèmes de protection contre la foudre Blitzschutzsystembauteile (LPSC) - Teil 1: Anforderungen
(CSPF) - Partie 1: Exigences pour les composants de an Verbindungsbauteile
connexion (IEC 62561-1:2023)
(IEC 62561-1:2023)
This European Standard was approved by CENELEC on 2023-05-04. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62561-1:2023 E
---------------------- Page: 3 ----------------------
SIST EN IEC 62561-1:2023
EN IEC 62561-1:2023 (E)
European foreword
The text of document 81/721/FDIS, future edition 3 of IEC 62561-1, prepared by IEC/TC 81 "Lightning
protection" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
EN IEC 62561-1:2023.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2024-02-04
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2026-05-04
document have to be withdrawn
This document supersedes EN 62561-1:2017 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 62561-1:2023 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 62305 (series) NOTE Approved as EN 62305 (series)
2
---------------------- Page: 4 ----------------------
SIST EN IEC 62561-1:2023
EN IEC 62561-1:2023 (E)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendment
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.