EN 61534-21:2006

Powertrack systems - Part 21: Particular requirements for powertrack systems intended for wall and ceiling mounting

This standard specifies the particular requirements and tests for PT systems intended for mounting on walls and/or ceiling. They may be installed flush or semi-flush, surface mounted, suspended or spaced away from the surface using fixing devices.

Stromschienensysteme - Teil 21: Besondere Anforderungen für Stromschienensysteme für Wand und Decke

Systèmes de conducteurs préfabriqués - Partie 21: Exigences particulières pour les systèmes de conducteurs préfabriqués destinés au montage sur des murs et des plafonds

La présente norme spécifie les exigences particulières et les essais des systèmes de conducteurs préfabriqués destinés au montage sur des murs et/ou des plafonds. Ils peuvent être montés encastrés ou semi-encastrés, en saillie, suspendus ou à distance de la surface au moyen d'accessoires de fixation.

Sistemi napajalnih razvodnic - 21. del: Posebne zahteve za sisteme zbiralčnih vodnikov, predvidene za stensko in stropno montažo (IEC 61534-21:2006)

General Information

• Status: Withdrawn
• Publication Date: 10-Sep-2006
• Withdrawal Date: 31-Aug-2009
• ICS: 29.060.10 - Wires
• ICS: 29.120.20 - Connecting devices
• Technical Committee: CLC/TC 213 - Cable management systems
• Drafting Committee: IEC/SC 23A - IEC_SC_23A
• Parallel Committee: IEC/SC 23A - IEC_SC_23A
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 24-Jul-2017
• Completion Date: 24-Jul-2017
• Directive: 2006/95/EC - Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits (codified version)
• Directive: 2014/35/EU - Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits
• Directive: 2014/53/EU - Directive 2014/53/EU of The European Parliament and of the Council of 16 April 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC
• Directive: 73/23/EEC - Electrical equipment designed for use within certain voltage limits
• Ref Project: SIST EN 61534-21:2007 - Powertrack systems -- Part 21: Particular requirements for powertrack systems intended for wall and ceiling mounting

Relations

• Replaced By: EN 61534-21:2014 - Powertrack systems - Part 21: Particular requirements for powertrack systems intended for wall and ceiling mounting
• Effective Date: 28-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-januar-2007
6LVWHPLQDSDMDOQLKUD]YRGQLFGHO3RVHEQH]DKWHYH]DVLVWHPH]ELUDOþQLK
YRGQLNRYSUHGYLGHQH]DVWHQVNRLQVWURSQRPRQWDåR,(&
Powertrack systems -- Part 21: Particular requirements for powertrack systems intended
for wall and ceiling mounting
Stromschienensysteme - Teil 21: Besondere Anforderungen für Stromschienensysteme
für Wand und Decke
Systèmes de conducteurs préfabriqués -- Partie 21: Exigences particulières pour les
systèmes de conducteurs préfabriqués destinés au montage sur des murs et des
plafonds
Ta slovenski standard je istoveten z: EN 61534-21:2006
ICS:
29.060.10 Žice Wires
29.140.50 Instalacijski sistemi za Lighting installation systems
razsvetljavo
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 61534-21
NORME EUROPÉENNE
September 2006
EUROPÄISCHE NORM
ICS 29.060.10; 29.120.20
English version
Powertrack systems
Part 21: Particular requirements for powertrack systems
intended for wall and ceiling mounting
(IEC 61534-21:2006)
Systèmes de conducteurs préfabriqués Stromschienensysteme
Partie 21: Exigences particulières Teil 21: Besondere Anforderungen
pour les systèmes de conducteurs für Stromschienensysteme
préfabriqués destinés au montage für Wand und Decke
sur des murs et des plafonds (IEC 61534-21:2006)
(CEI 61534-21:2006)
This European Standard was approved by CENELEC on 2006-09-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, the Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels

© 2006 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61534-21:2006 E
Foreword
The text of document 23A/495/FDIS, future edition 1 of IEC 61534-21, prepared by SC 23A, Cable
management systems, of IEC TC 23, Electrical accessories, was submitted to the IEC-CENELEC parallel
vote and was approved by CENELEC as EN 61534-21 on 2006-09-01.
This standard is to be used in conjunction with EN 61534-1:2003, Powertrack systems - Part 1: General
requirements.
This Part 21 supplements or modifies the corresponding clauses of EN 61534-1. Where a particular
clause or subclause of Part 1 is not mentioned in this Part 21, that clause or subclause applies as far as
is reasonable. Where this Part 21 states "addition", "modification" or "replacement", the relevant text of
Part 1 is to be adapted accordingly.
Subclauses, tables and figures which are in addition to those in Part 1 are numbered starting from 101.
NOTE The following print types are used:
– requirements: in roman type;
– test specifications: in italic type;
– notes: in small roman type.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2007-06-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2009-09-01
__________
Endorsement notice
The text of the International Standard IEC 61534-21:2006 was approved by CENELEC as a European
Standard without any modification.
__________
NORME CEI
INTERNATIONALE
IEC
61534-21
INTERNATIONAL
Première édition
STANDARD
First edition
2006-06
Systèmes de conducteurs préfabriqués –
Partie 21:
Exigences particulières pour les systèmes
de conducteurs préfabriqués destinés
au montage sur des murs et des plafonds

Powertrack systems –
Part 21:
Particular requirements for powertrack systems
intended for wall and ceiling mounting

 IEC 2006 Droits de reproduction réservés  Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: [phone] Telefax: [phone] E-mail: [e-mail] Web: www.iec.ch
CODE PRIX
J
PRICE CODE
Commission Electrotechnique Internationale
International Electrotechnical Commission
МеждународнаяЭлектротехническаяКомиссия
Pour prix, voir catalogue en vigueur
For price, see current catalogue

61534-21  IEC:2006 – 3 –
CONTENTS
FOREWORD.5

1 Scope.9
2 Normative references .9
3 Terms and Definitions.9
4 General requirements .9
5 General notes on tests .11
6 Ratings.11
7 Classification.11
8 Marking and documentation.11
9 Construction .11
10 Clearances, creepage distances and solid insulation .13
11 Protection against electric shock .13
12 Terminals and Terminations .13
13 Screws, current carrying parts and connections.13
14 Mechanical Strength.13
15 Insulation resistance test and dielectric strength test.17
16 Normal operation.17
17 Temperature rise .17
18 Resistance to heat.17
19 Fire hazard.17
20 External influences .17
21 Electromagnetic compatibility .17

61534-21  IEC:2006 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
POWERTRACK SYSTEMS –
Part 21: Particular requirements for powertrack systems
intended for wall and ceiling mounting

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by an
...