Fibre optic active components and devices - Package and interface standards - Part 22: 25 Gbit/s directly modulated laser packages with temperature control unit

IEC 62148-22: 2023 defines the physical dimensions and interface specifications for directly modulated laser (DML) devices used in optical telecommunication and optical data transmission applications. The intent of this document is to adequately specify the physical requirements for DML devices so as to enable mechanical interchangeability of laser devices or transmitters complying with this document both at the printed circuit board and for any panel-mounting requirements.

Aktive Lichtwellenleiterbauelemente und Geräte - Gehäuse- und Schnittstellennormen - Teil 22: Direkt modulierte 25-Gbit/s-Lasergehäuse mit Temperaturkontrolleinheit

Composants et dispositifs actifs fibroniques - Normes de boîtier et d'interface - Partie 22: Boîtiers pour laser à modulation 25 Gbit/s équipés d'une unité de régulation de température

IEC 62148-22: 2023 définit les dimensions physiques et les spécifications des interfaces pour les dispositifs laser à modulation directe (DML) utilisés dans les applications de télécommunications optiques et de transmission optique de données. L’objet du présent document est de spécifier de manière adéquate les exigences physiques des dispositifs DML de façon à permettre l’interchangeabilité mécanique des dispositifs laser ou des émetteurs conformes au présent document, tant au niveau de la carte de circuit imprimé que pour toute exigence de montage sur panneau.

Optične aktivne komponente in naprave - Standardi za ohišja in vmesnike - 22. del: Neposredno modulirana laserska ohišja 25 Gbit/s z enoto za nadzor temperature (IEC 62148-22:2023)

General Information

Status
Published
Publication Date
23-Mar-2023
Current Stage
6060 - Document made available - Publishing
Start Date
24-Mar-2023
Due Date
30-Jun-2023
Completion Date
24-Mar-2023

Buy Standard

Standard
EN IEC 62148-22:2023
English language
26 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN IEC 62148-22:2022
English language
20 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 62148-22:2023
01-maj-2023

Optične aktivne komponente in naprave - Standardi za ohišja in vmesnike - 22. del:

Neposredno modulirana laserska ohišja 25 Gbit/s z enoto za nadzor temperature
(IEC 62148-22:2023)

Fibre optic active components and devices - Package and interface standards - Part 22:

25 Gbit/s directly modulated laser packages with temperature control unit (IEC 62148-

22:2023)

Aktive Lichtwellenleiterbauelemente und Geräte - Gehäuse- und Schnittstellennormen -

Teil 22: Direkt modulierte 25-Gbit/s-Lasergehäuse mit Temperaturkontrolleinheit (IEC

62148-22:2023)

Composants et dispositifs actifs fibroniques - Normes de boîtier et d'interface - Partie 22:

Boîtiers pour laser à modulation 25 Gbit/s équipés d'une unité de régulation de
température (IEC 62148-22:2023)
Ta slovenski standard je istoveten z: EN IEC 62148-22:2023
ICS:
33.180.20 Povezovalne naprave za Fibre optic interconnecting
optična vlakna devices
SIST EN IEC 62148-22:2023 en

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 62148-22:2023
---------------------- Page: 2 ----------------------
SIST EN IEC 62148-22:2023
EUROPEAN STANDARD EN IEC 62148-22
NORME EUROPÉENNE
EUROPÄISCHE NORM March 2023
ICS 33.180.20
English Version
Fibre optic active components and devices - Package and
interface standards - Part 22: 25 Gbit/s directly modulated laser
packages with temperature control unit
(IEC 62148-22:2023)

Composants et dispositifs actifs fibroniques - Normes de Aktive Lichtwellenleiterbauelemente und Geräte - Gehäuse-

boîtier et d'interface - Partie 22: Boîtiers pour laser à und Schnittstellennormen - Teil 22: Direkt modulierte 25-

modulation 25 Gbit/s équipés d'une unité de régulation de Gbit/s-Lasergehäuse mit Temperaturkontrolleinheit

température (IEC 62148-22:2023)
(IEC 62148-22:2023)

This European Standard was approved by CENELEC on 2023-03-22. CENELEC members are bound to comply with the CEN/CENELEC

Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC

Management Centre or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation

under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the

same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,

Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the

Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,

Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2023 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.

Ref. No. EN IEC 62148-22:2023 E
---------------------- Page: 3 ----------------------
SIST EN IEC 62148-22:2023
EN IEC 62148-22:2023 (E)
European foreword

The text of document 86C/1851/FDIS, future edition 1 of IEC 62148-22, prepared by SC 86C "Fibre

optic systems and active devices" of IEC/TC 86 "Fibre optics" was submitted to the IEC-CENELEC

parallel vote and approved by CENELEC as EN IEC 62148-22:2023.
The following dates are fixed:

• latest date by which the document has to be implemented at national (dop) 2023-12-22

level by publication of an identical national standard or by endorsement

• latest date by which the national standards conflicting with the (dow) 2026-03-22

document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Any feedback and questions on this document should be directed to the users’ national committee. A

complete listing of these bodies can be found on the CENELEC website.
Endorsement notice

The text of the International Standard IEC 62148-22:2023 was approved by CENELEC as a European

Standard without any modification.

In the official version, for Bibliography, the following notes have to be added for the standard indicated:

IEC 60191 (series) NOTE Approved as EN 60191 (series)
IEC 60603 (series) NOTE Approved as EN 60603 (series)
IEC 60794 (series) NOTE Approved as EN IEC 60794 (series)
IEC 60825 (series) NOTE Approved as EN 60825 (series)
IEC 61076 (series) NOTE Approved as EN IEC 61076 (series)
IEC 61280 (series) NOTE Approved as EN IEC 61280 (series)
IEC 61281-1 NOTE Approved as EN IEC 61281-1
1 2
IEC 61754-36 NOTE Approved as EN IEC 61754-36
3 4
IEC 61754-37 NOTE Approved as EN IEC 61754-37
IEC 62007-1 NOTE Approved as EN 62007-1
Under preparation. Stage at the time of publication: IEC/AFDIS 61754-36:2022.
Under preparation. Stage at the time of publication: prEN IEC 61754-36:2022.
Under preparation. Stage at the time of publication: IEC/AFDIS 61754-37:2022.
Under preparation. Stage at the time of publication: prEN IEC 61754-37:2022.
---------------------- Page: 4 ----------------------
SIST EN IEC 62148-22:2023
EN IEC 62148-22:2023 (E)
IEC 62007-2 NOTE Approved as EN 62007-2
IEC 62148-15:2021 NOTE Approved as EN IEC 62148-15:2021 (not modified)
IEC 62148-18:2014 NOTE Approved as EN 62148-18:2015 (not modified)
IEC 62149-2 NOTE Approved as EN 62149-2
ISO 1101 NOTE Approved as EN ISO 1101
---------------------- Page: 5 ----------------------
SIST EN IEC 62148-22:2023
EN IEC 62148-22:2023 (E)
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following documents are referred to in the text in such a way that some or all of their content

constitutes requirements of this document. For dated references, only the edition cited applies. For

undated references, the latest edition of the referenced document (including any amendments)

applies.

NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod),

the relevant EN/HD applies.

NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available

here: www.cencenelec.eu.
Publication Year Title EN/HD Year
IEC 60793-2-50 - Optical fibres - Part 2-50: Product EN IEC 60793-2-50 -
specifications - Sectional specification for
class B single-mode fibres
IEC 61753 series Fibre optic interconnecting devices and EN IEC 61753 series
passive components - Performance standard
IEC 61754 series Fibre optic interconnecting devices and EN 61754 series
passive components - Fibre optic connector
interfaces
IEC 61755 series Fibre optic interconnecting devices and EN IEC 61755 series
passive components - Connector optical
interfaces for single-mode fibres
IEC 61754-20 - Fibre optic interconnecting devices and EN 61754-20 -
passive components - Fibre optic connector
interfaces - Part 20: Type LC connector family
IEC 62148-1 - Fibre optic active components and devices - EN IEC 62148-1 -
Package and interface standards - Part 1:
General and guidance
---------------------- Page: 6 ----------------------
SIST EN IEC 62148-22:2023
IEC 62148-22
Edition 1.0 2023-02
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Fibre optic active components and devices – Package and interface standards –
Part 22: 25 Gbit/s directly modulated laser packages with temperature control
unit

Composants et dispositifs actifs fibroniques – Normes de boîtier et d’interface –

Partie 22: Boîtiers pour laser à modulation directe 25 Gbit/s équipés d’une unité

de régulation de température
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 33.180.20 ISBN 978-2-8322-6528-4

Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale
---------------------- Page: 7 ----------------------
SIST EN IEC 62148-22:2023
– 2 – IEC 62148-22:2023 © IEC 2023
CONTENTS

FOREWORD ........................................................................................................................... 4

INTRODUCTION ..................................................................................................................... 6

1 Scope .............................................................................................................................. 7

2 Normative references ...................................................................................................... 7

3 Terms, definitions and abbreviated terms ........................................................................ 7

3.1 Terms and definitions .............................................................................................. 8

3.2 Abbreviated terms ................................................................................................... 8

4 Specification of the optical interface ................................................................................ 8

4.1 Optical connector interface ..................................................................................... 8

4.2 Pigtail interface ....................................................................................................... 8

5 Specification of electrical interface .................................................................................. 8

5.1 General ................................................................................................................... 8

5.2 Electrical interface specifications for DML TO-can package .................................... 9

5.2.1 5-pin ................................................................................................................ 9

5.2.2 7-pin ................................................................................................................ 9

5.2.3 8-pin .............................................................................................................. 10

5.3 Electrical interface specifications for DML TOSA module packages ...................... 11

5.3.1 5-pin .............................................................................................................. 11

5.3.2 7-pin .............................................................................................................. 11

5.3.3 8-pin .............................................................................................................. 12

6 Outline........................................................................................................................... 12

6.1 General ................................................................................................................. 12

6.2 Outline of DML TO-can package ........................................................................... 12

6.2.1 Drawing of case outline ................................................................................. 12

6.2.2 Dimensions of DML TO-can packages ........................................................... 14

6.3 Outline of DML TOSA module package with an LC connector ............................... 15

6.3.1 Drawing of case outline ................................................................................. 15

6.3.2 Dimensions of DML TOSA module package with LC connector ...................... 17

6.3.3 Dimensions of LC type optical receptacle ...................................................... 18

6.4 Outlines of DML pigtail package ............................................................................ 18

6.4.1 Drawing of case outline ................................................................................. 18

6.4.2 Dimensions of DML pigtail package ............................................................... 19

6.4.3 Optical connector........................................................................................... 21

Bibliography .......................................................................................................................... 22

Figure 1 – Electrical terminal numbering assignments for 5-pin type TO-can packages

with temperature control unit ................................................................................................... 9

Figure 2 – Electrical terminal numbering assignments for 7-pin type TO-can packages

with temperature control unit ................................................................................................. 10

Figure 3 – Electrical terminal numbering assignments for 8-pin type TO-can packages

with temperature control unit ................................................................................................. 10

Figure 4 – Electrical terminal numbering assignments for 5-pin TOSA module packages

with temperature control unit ................................................................................................. 11

Figure 5 – Electrical terminal numbering assignments for 7-pin TOSA module packages

with temperature control unit ................................................................................................. 12

Figure 6 – Electrical terminal numbering assignments for 8-pin TOSA module packages

with temperature control unit ................................................................................................. 12

---------------------- Page: 8 ----------------------
SIST EN IEC 62148-22:2023
IEC 62148-22:2023 © IEC 2023 – 3 –

Figure 7 – Case outline of TO-can with spherical lens ........................................................... 13

Figure 8 – Case outline of TO-can with aspherical lens ......................................................... 13

Figure 9 – Pin configuration for 5-pin TO-can ........................................................................ 13

Figure 10 – Pin configuration for 7-pin TO-can ...................................................................... 14

Figure 11 – Pin configuration for 8-pin TO-can ...................................................................... 14

Figure 12 – Schematic diagram of DML TOSA module packages with LC connector ............. 17

Figure 13 – Schematic diagram and pin-out of DML pigtail package ...................................... 19

Table 1 – Pin function definitions for 5-pin type DML TO-can packages .................................. 9

Table 2 – Pin function definitions for 7-pin type DML TO-can packages ................................ 10

Table 3 – Pin function definitions for 8-pin type DML TO-can packages ................................ 11

Table 4 – Dimensions of DML TO-can package ..................................................................... 15

Table 5 – Dimensions of DML TOSA module package with LC connector .............................. 17

Table 6 – Pin out terminals of DML TOSA module packages with LC connector and

with flexible printed circuit board ........................................................................................... 18

Table 7 – Dimensions of DML pigtail package ....................................................................... 20

Table 8 – Pin out terminals of DML pigtail package ............................................................... 21

---------------------- Page: 9 ----------------------
SIST EN IEC 62148-22:2023
– 4 – IEC 62148-22:2023 © IEC 2023
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES –
PACKAGE AND INTERFACE STANDARDS –
Part 22: 25 Gbit/s directly modulated laser packages
with temperature control unit
FOREWORD

1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising

all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international

co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and

in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,

Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their

preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with

may participate in this preparatory work. International, governmental and non-governmental organizations liaising

with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for

Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.

2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international

consensus of opinion on the relevant subjects since each technical committee has representation from all

interested IEC National Committees.

3) IEC Publications have the form of recommendations for international use and are accepted by IEC National

Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC

Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any

misinterpretation by any end user.

4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications

transparently to the maximum extent possible in their national and regional publications. Any divergence between

any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.

5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity

assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any

services carried out by independent certification bodies.

6) All users should ensure that they have the latest edition of this publication.

7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and

members of its technical committees and IEC National Committees for any personal injury, property damage or

other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and

expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC

Publications.

8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is

indispensable for the correct application of this publication.

9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent

rights. IEC shall not be held responsible for identifying any or all such patent rights.

IEC 62148-22 has been prepared by subcommittee 86C: Fibre optic systems and active devices,

of IEC technical committee 86: Fibre optics. It is an International Standard.
The text of this International Standard is based on the following documents:
Draft Report on voting
86C/1851/FDIS 86C/1859/RVD
Full
...

SLOVENSKI STANDARD
oSIST prEN IEC 62148-22:2022
01-oktober-2022

Aktivne optične komponente in naprave - Standardi za ohišja in vmesnike - 22. del:

Neposredno modulirana laserska ohišja 25 Gbit/s z enoto za nadzor temperature

Fibre optic active components and devices - Package and interface standards - Part 22:

25 Gbit/s directly modulated laser packages with temperature control unit
Ta slovenski standard je istoveten z: prEN IEC 62148-22:2022
ICS:
33.180.20 Povezovalne naprave za Fibre optic interconnecting
optična vlakna devices
oSIST prEN IEC 62148-22:2022 en

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN IEC 62148-22:2022
---------------------- Page: 2 ----------------------
oSIST prEN IEC 62148-22:2022
86C/1804/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 62148-22 ED1
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2022-07-08 2022-09-30
SUPERSEDES DOCUMENTS:
86C/1765/CD, 86C/1795/CC
IEC SC 86C : FIBRE OPTIC SYSTEMS AND ACTIVE DEVICES
SECRETARIAT: SECRETARY:
United States of America Mr Fred Heismann
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:
Other TC/SCs are requested to indicate their interest, if
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY

SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING

Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.

This document is still under study and subject to change. It should not be used for reference purposes.

Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of

which they are aware and to provide supporting documentation.
TITLE:

Fibre optic active components and devices - Package and interface standards - Part 22: 25 Gbit/s

directly modulated laser packages with temperature control unit
PROPOSED STABILITY DATE: 2026
NOTE FROM TC/SC OFFICERS:

Copyright © 2022 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to download this

electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.

You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without

permission in writing from IEC.
---------------------- Page: 3 ----------------------
oSIST prEN IEC 62148-22:2022
IEC CDV 62148-22/Ed1 © IEC:2022 – 2 – 86C/1804/CDV
1 CONTENTS

3 FOREWORD ........................................................................................................................... 4

4 INTRODUCTION ..................................................................................................................... 6

5 1 Scope .............................................................................................................................. 7

6 2 Normative references ...................................................................................................... 7

7 3 Terms, definitions and abbreviated terms ........................................................................ 7

8 4 Specification of the optical interface ................................................................................ 8

9 4.1 Optical connector interface ..................................................................................... 8

10 4.2 Pigtail interface ....................................................................................................... 8

11 5 Specification of electrical interface .................................................................................. 8

12 5.1 General ................................................................................................................... 8

13 5.2 Electrical interface specifications for DML TO CAN package ................................... 8

14 5.2.1 5-pin ................................................................................................................ 8

15 5.2.2 7-pin ................................................................................................................ 9

16 5.2.3 8-pin .............................................................................................................. 10

17 5.3 Electrical interface specifications for DML TOSA packages ................................... 10

18 5.3.1 5-pin .............................................................................................................. 10

19 5.3.2 7-pin .............................................................................................................. 11

20 5.3.3 8-pin .............................................................................................................. 11

21 6 Outline .......................................................................................................................... 12

22 6.1 General ................................................................................................................. 12

23 6.2 Outline of DML TO CAN package .......................................................................... 12

24 6.2.1 Drawing of case outline ................................................................................. 12

25 6.2.2 Dimensions of DML TO CAN packages .......................................................... 13

26 6.3 Outline of DML TOSA package with an LC connector ............................................ 14

27 6.3.1 Drawing of case outline ................................................................................. 14

28 6.3.2 Dimensions of DML TOSA package with LC connector .................................. 15

29 6.3.3 Dimension of LC type optical receptacle ........................................................ 16

30 6.4 Outlines of DML pigtail package ............................................................................ 16

31 6.4.1 Drawing of case outline ................................................................................. 16

32 6.4.2 Dimensions of DML pigtail package ............................................................... 17

33 6.4.3 Optical connector .......................................................................................... 18

34 Bibliography .......................................................................................................................... 19

36 Figure 1 –Electrical terminal numbering assignments for 5-pin type TO CAN packages

37 with temperature control unit ................................................................................................... 9

38 Figure 2 – Electrical terminal numbering assignments for 7-pin type TO CAN packages

39 with temperature control unit ................................................................................................... 9

40 Figure 3 – Electrical terminal numbering assignments for 8-pin type TO CAN packages

41 with temperature control unit ................................................................................................. 10

42 Figure 4 – Electrical terminal numbering assignments for 5-pin TOSA packages with

43 temperature control unit ........................................................................................................ 11

44 Figure 5 – Electrical terminal numbering assignments for 7-pin TOSA packages with

45 temperature control unit ........................................................................................................ 11

46 Figure 6 – Electrical terminal numbering assignments for 8-pin TOSA packages with

47 temperature control unit ........................................................................................................ 11

---------------------- Page: 4 ----------------------
oSIST prEN IEC 62148-22:2022
IEC CDV 62148-22/Ed1 © IEC:2022 – 3 – 86C/1804/CDV

48 Figure 7 – Case outline of TO CAN with spherical lens ......................................................... 12

49 Figure 8 – Case outline of TO CAN with aspherical lens ....................................................... 12

50 Figure 9 – Pin configuration for 5-pin TO CAN ...................................................................... 12

51 Figure 10 – Pin configuration for 7-pin TO CAN .................................................................... 13

52 Figure 11 – Pin configuration for 8-pin TO CAN .................................................................... 13

53 Figure 12 – Schematic diagram of DML TOSA packages with LC connector.......................... 15

54 Figure 13 – Schematic diagram and pin-out of DML pigtail package ...................................... 17

56 Table 1 – Pin function definitions for 5-pin type DML TO CAN packages ................................. 9

57 Table 2 – Pin function definitions for 7-pin type DML TO CAN packages ................................. 9

58 Table 3 – Pin function definitions for 8-pin type DML TO CAN packages ............................... 10

59 Table 4 – Dimensions of DML TO CAN package ................................................................... 13

60 Table 5 – Dimensions of DML TOSA package with LC connector .......................................... 15

61 Table 6 – Pin out terminals of DML TOSA packages with LC connector and with

62 flexible printed circuit board .................................................................................................. 16

63 Table 7 – Dimensions of DML pigtail package ....................................................................... 17

64 Table 8 – Pin out terminals of DML pigtail package ............................................................... 18

---------------------- Page: 5 ----------------------
oSIST prEN IEC 62148-22:2022
IEC CDV 62148-22/Ed1 © IEC:2022 – 4 – 86C/1804/CDV
68 INTERNATIONAL ELECTROTECHNICAL COMMISSION
69 ____________
71 FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES – PACKAGE AND
72 INTERFACE STANDARDS
74 Part 22: 25 Gbit/s Directly modulated laser packages with temperature
75 control unit
78 FOREWORD

79 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising

80 all national electrotechnical committees (IEC National Committees). The object of IEC is to promote

81 international co-operation on all questions concerning standardization in the electrical and electronic fields. To

82 this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,

83 Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC

84 Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested

85 in the subject dealt with may participate in this preparatory work. International, governmental and non-

86 governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely

87 with the International Organization for Standardization (ISO) in accordance with conditions determined by

88 agreement between the two organizations.

89 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international

90 consensus of opinion on the relevant subjects since each technical committee has representation from all

91 interested IEC National Committees.

92 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National

93 Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC

94 Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any

95 misinterpretation by any end user.

96 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications

97 transparently to the maximum extent possible in their national and regional publications. Any divergence

98 between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in

99 the latter.

100 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity

101 assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any

102 services carried out by independent certification bodies.

103 6) All users should ensure that they have the latest edition of this publication.

104 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and

105 members of its technical committees and IEC National Committees for any personal injury, property damage or

106 other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and

107 expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC

108 Publications.

109 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is

110 indispensable for the correct application of this publication.

111 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of

112 patent rights. IEC shall not be held responsible for identifying any or all such patent rights.

113 IEC 62148-22 has been prepared by subcommittee 86C: Fibre optic systems and active

114 devices, of IEC technical committee 86: Fibre optics. It is an International Standard.

115 The text of this International Standard is based on the following documents:
Draft Report on voting
86C/XX/FDIS 86C/XX/RVD

116 Full information on the voting for its approval can be found in the report on voting indicated in

117 the above table.

118 The language used for the development of this International Standard is English.

119 This document was drafted in accordance with ISO/IEC Directives, Part 2, and developed in

120 accordance with ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC Supplement,

---------------------- Page: 6 ----------------------
oSIST prEN IEC 62148-22:2022
IEC CDV 62148-22/Ed1 © IEC:2022 – 5 – 86C/1804/CDV

121 available at www.iec.ch/members_experts/refdocs. The main document types developed by

122 IEC are described in greater detail at www.iec.ch/standardsdev/publications.

123 A list of all parts of the IEC 62148 series, published under the general title Fibre optic active

124 components and devices – Package and interface standards, can be found on the IEC

125 website.

126 The committee has decided that the contents of this document will remain unchanged until the

127 stability date indicated on the IEC website under "http://webstore.iec.ch" in the data related to

128 the specific document. At this date, the document will be
129 • reconfirmed,
130 • withdrawn,
131 • replaced by a revised edition, or
132 • amended.
---------------------- Page: 7 ----------------------
oSIST prEN IEC 62148-22:2022
IEC CDV 62148-22/Ed1 © IEC:2022 – 6 – 86C/1804/CDV
133 INTRODUCTION

134 Fibre optic laser devices are used to convert electrical signals into optical signals. This

135 international standard covers the physical dimensions and interfaces for directly modulated

136 laser (DML) packages which are intended to be applied to 25 Gbit/s transceivers.

---------------------- Page: 8 ----------------------
oSIST prEN IEC 62148-22:2022
IEC CDV 62148-22/Ed1 © IEC:2022 – 7 – 86C/1804/CDV
137 FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES – PACKAGE AND
138 INTERFACE STANDARDS
139
140 Part 22: 25 Gbit/s Directly modulated laser packages with temperature
141 control unit
142
143 1 Scope

144 This part of IEC 62148 defines the physical dimensions and interface specifications for

145 directly modulated laser (DML) devices used in optical telecommunication and optical data

146 transmission applications.

147 The intent of this document is to adequately specify the physical requirements for DML

148 devices so as to enable mechanical interchangeability of laser devices or transmitters

149 complying with this document both at the printed circuit board and for any panel-mounting

150 requirements.
151 2 Normative references

152 The following documents are referred to in the text in such a way that some or all of their

153 content constitutes requirements of this document. For dated references, only the edition

154 cited applies. For undated references, the latest edition of the referenced document (including

155 any amendments) applies.
156 IEC 60793-2-50, Optical fibres – Part
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.