EN IEC 61784-5-12:2024
(Main)Industrial networks - Profiles - Part 5-12: Installation of fieldbuses - Installation profiles for CPF 12
Industrial networks - Profiles - Part 5-12: Installation of fieldbuses - Installation profiles for CPF 12
IEC 61784-5-12:2024 is available as IEC 61784-5-12:2024 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 61784-5-12:2024 specifies the installation profile for CPF 12 (EtherCAT™). The installation profile is specified in Annex A. This annex is read in conjunction with IEC 61918:2018, IEC 61918:2018/AMD1:2022 and IEC 61918:2018/AMD2:2024. EtherCAT™ is a trade name of Beckhoff, Verl. This information is given for the convenience of users of this document and does not constitute an endorsement by IEC of the trademark holder or any of its products. Compliance to this profile does not require use of the trade name. Use of the trade name requires permission of the trade name holder.
Industrielle Kommunikationsnetze - Profile - Teil 5-12: Feldbusinstallation - Installationsprofile für die Kommunikationsprofilfamilie 12
Réseaux industriels - Profils - Partie 5-12: Installation des bus de terrain - Profils d’installation pour CPF 12
IEC 61784-5-12:2024 est disponible sous forme de IEC 61784-5-12:2024 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.L’IEC 61784-5-12:2024 définit les profils d’installation pour la CPF 12 (EtherCAT™). Le profil d’installation est spécifié à l’Annexe A. Cette annexe est à lire conjointement avec l’IEC 61918:2018, l’IEC 61918:2018/AMD1:2022 et l’IEC 61918:2018/AMD2:2024. EtherCAT™ est une appellation commerciale de Beckhoff, Verl. Cette information est donnée à l’intention des utilisateurs du présent document et ne signifie nullement que l’IEC approuve l’emploi du produit ainsi désigné. La conformité à ce profil n’exige pas l’utilisation de l’appellation commerciale. L’utilisation de l’appellation commerciale exige l’autorisation du détenteur de celle-ci.
Industrijska komunikacijska omrežja - Profili - 5-12. del: Inštalacija procesnih vodil - Inštalacijski profili za CPF 12 (IEC 61784-5-12:2024)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2024
Nadomešča:
SIST EN IEC 61784-5-12:2019
Industrijska komunikacijska omrežja - Profili - 5-12. del: Inštalacija procesnih vodil
- Inštalacijski profili za CPF 12 (IEC 61784-5-12:2024)
Industrial networks - Profiles - Part 5-12: Installation of fieldbuses - Installation profiles
for CPF 12 (IEC 61784-5-12:2024)
Industrielle Kommunikationsnetze - Profile - Teil 5-12: Feldbusinstallation -
Installationsprofile für die Kommunikationsprofilfamilie 12 (IEC 61784-5-12:2024)
Réseaux industriels - Profils - Partie 5-12: Installation des bus de terrain - Profils
d’installation pour CPF 12 (IEC 61784-5-12:2024)
Ta slovenski standard je istoveten z: EN IEC 61784-5-12:2024
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.100.40 Transportni sloj Transport layer
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN IEC 61784-5-12
NORME EUROPÉENNE
EUROPÄISCHE NORM May 2024
ICS 25.040.40; 35.100.40 Supersedes EN IEC 61784-5-12:2018
English Version
Industrial networks - Profiles - Part 5-12: Installation of
fieldbuses - Installation profiles for CPF 12
(IEC 61784-5-12:2024)
Réseaux industriels - Profils - Partie 5-12: Installation des Industrielle Kommunikationsnetze - Profile - Teil 5-12:
bus de terrain - Profils d'installation pour CPF 12 Feldbusinstallation - Installationsprofile für die
(IEC 61784-5-12:2024) Kommunikationsprofilfamilie 12
(IEC 61784-5-12:2024)
This European Standard was approved by CENELEC on 2024-04-25. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Türkiye and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 61784-5-12:2024 E
European foreword
The text of document 65C/1283/FDIS, future edition 3 of IEC 61784-5-12, prepared by SC 65C
"Industrial networks" of IEC/TC 65 "Industrial-process measurement, control and automation" was
submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2025-01-25
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2027-04-25
document have to be withdrawn
This document supersedes EN IEC 61784-5-12:2018 and all of its amendments and corrigenda (if
any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document is read in conjunction with EN IEC 61918:2018 and all of its amendments and
corrigenda (if any).
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 61784-5-12:2024 was approved by CENELEC as a
European Standard without any modification.
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
here: www.cencenelec.eu.
Publication Year Title EN/HD Year
IEC 61918 2018 Industrial communication networks - EN IEC 61918 2018
Installation of communication networks in
industrial premises
- - + A11 2019
- - + A12 2023
- - + AC 2019-03
+ AMD1 2022 + A1 2022
+ AMD2 2024 + A2 2024
The normative references of EN IEC 61918:2018, EN IEC 61918:2018/A11:2019,
EN IEC 61918:2018/A12:2023, EN IEC 61918:2018/AC:2019-03, EN IEC 61918:2018/A1:2022, and
EN IEC 61918:2018/A2:2024 apply.
IEC 61784-5-12 ®
Edition 3.0 2024-03
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Industrial networks – Profiles –
Part 5-12: Installation of fieldbuses – Installation profiles for CPF 12
Réseaux industriels – Profils –
Partie 5-12: Installation des bus de terrain – Profils d’installation pour CPF 12
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 25.040.40, 35.100.40 ISBN 978-2-8322-8391-2
– 2 – IEC 61784-5-12:2024 © IEC 2024
CONTENTS
FOREWORD . 4
INTRODUCTION . 6
1 Scope . 7
2 Normative references . 7
3 Terms, definitions and abbreviated terms . 7
4 CPF 12: Overview of installation profiles . 8
5 Installation profile conventions. 8
6 Conformance to installation profiles . 9
Annex A (normative) CPF 12 (EtherCAT™) specific installation profile . 10
A.1 Installation profile scope . 10
A.2 Normative references . 10
A.3 Installation profile terms, definitions, and abbreviated terms . 10
A.3.1 Terms and definitions . 10
A.3.2 Abbreviated terms . 10
A.3.3 Conventions for installation profiles . 10
A.4 Installation planning . 10
A.4.1 General . 10
A.4.2 Planning requirements . 10
A.4.3 Network capabilities . 11
A.4.4 Selection and use of cabling components . 13
A.4.5 Cabling planning documentation . 18
A.4.6 Verification of cabling planning specification . 18
A.5 Installation implementation. 19
A.5.1 General requirements . 19
A.5.2 Cable installation . 19
A.5.3 Connector installation . 19
A.5.4 Terminator installation . 19
A.5.5 Device installation . 19
A.5.6 Coding and labelling . 19
A.5.7 Earthing and bonding of equipment and devices and shield cabling . 19
A.5.8 As-implemented cabling documentation . 19
A.6 Installation verification and installation acceptance test . 20
A.6.1 General . 20
A.6.2 Installation verification . 20
A.6.3 Installation acceptance test . 21
A.7 Installation administration . 21
A.8 Installation maintenance and installation troubleshooting . 21
Figure 1 – Standards relationships . 6
Table A.1 – Network characteristics for balanced cabling based on Ethernet . 12
Table A.2 – Network characteristics for optical fibre cabling . 13
Table A.3 – Information relevant to copper cable: CPF 12 fixed cables . 14
Table A.4 – Information relevant to copper cable: CPF 12 flexible cables. 14
Table A.5 – Information relevant to copper cable: CPF 12 special cables . 15
IEC 61784-5-12:2024 © IEC 2024 – 3 –
Table A.6 – Information relevant to optical fibre cables: CPF 12 . 16
Table A.7 – Connectors for balanced cabling CPs based on Ethernet . 16
Table A.8 – Optical fibre connecting hardware . 17
Table A.9 – Relationship between FOC and fibre types (CPF 12) . 17
– 4 – IEC 61784-5-12:2024 © IEC 2024
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
INDUSTRIAL NETWORKS –
PROFILES –
Part 5-12: Installation of fieldbuses –
Installation profiles for CPF 12
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent pos
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.