EN 61158-5-3:2008
(Main)Industrial communication networks - Fieldbus specifications - Part 5-3: Application layer service definition - Type 3 elements
Industrial communication networks - Fieldbus specifications - Part 5-3: Application layer service definition - Type 3 elements
It is one of a series produced to facilitate the interconnection of automation system components. It is related to other standards in the set as defined by the 'three-layer' fieldbus reference model described in IEC/TR 61158 1. This sub-part contains material specific to Type 3 fieldbus. It includes the following significant changes with respect to the previous edition deletion of the former Type 6 fieldbus, and the placeholder for a Type 5 fieldbus data-link layer, for lack of market relevance; addition of new types of fieldbuses; division of this part into multiple parts numbered.
Industrielle Kommunikationsnetze - Feldbusse - Teil 5-3: Dienstfestlegungen des Application Layer (Anwendungsschicht) - Typ 3-Elemente
Réseaux de communication industriels - Spécifications des bus de terrain - Partie 5-3: Définition des services des couches d'application - Eléments de type 3
Industrijska komunikacijska omrežja - Specifikacije za procesno vodilo - 5-3. del: Definicija opravil na aplikacijskem nivoju - Elementi tipa 3 (IEC 61158-5-3:2007)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-julij-2008
1DGRPHãþD
SIST EN 61158-5:2004
Industrijska komunikacijska omrežja - Specifikacije za procesno vodilo - 5-3. del:
Definicija opravil na aplikacijskem nivoju - Elementi tipa 3 (IEC 61158-5-3:2007)
Industrial communication networks - Fieldbus specifications - Part 5-3: Application layer
service definition - Type 3 elements
Industrielle Kommunikationsnetze - Feldbusse - Teil 5-3: Dienstfestlegungen des
Application Layer (Anwendungsschicht) - Typ 3-Elemente
Réseaux de communication industriels - Spécifications des bus de terrain - Partie 5-3:
Définition des services des couches d'application - Eléments de type 3
Ta slovenski standard je istoveten z: EN 61158-5-3:2008
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.100.70 Uporabniški sloj Application layer
35.110 Omreževanje Networking
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 61158-5-3
NORME EUROPÉENNE
March 2008
EUROPÄISCHE NORM
ICS 35.100.70; 25.040.40 Partially supersedes EN 61158-5:2004
English version
Industrial communication networks -
Fieldbus specifications -
Part 5-3: Application layer service definition -
Type 3 elements
(IEC 61158-5-3:2007)
Réseaux de communication industriels - Industrielle Kommunikationsnetze -
Spécifications des bus de terrain - Feldbusse -
Partie 5-3: Définition des services Teil 5-3: Dienstfestlegungen
des couches d'application - des Application Layer
(Anwendungsschicht) -
Eléments de type 3
(CEI 61158-5-3:2007) Typ 3-Elemente
(IEC 61158-5-3:2007)
This European Standard was approved by CENELEC on 2008-02-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2008 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61158-5-3:2008 E
Foreword
The text of document 65C/475/FDIS, future edition 1 of IEC 61158-5-3, prepared by SC 65C, Industrial
networks, of IEC TC 65, Industrial-process measurement, control and automation, was submitted to the
IEC-CENELEC parallel vote and was approved by CENELEC as EN 61158-5-3 on 2008-02-01.
This and the other parts of the EN 61158-5 series supersede EN 61158-5:2004.
With respect to EN 61158-5:2004 the following changes were made:
– deletion of Type 6 fieldbus for lack of market relevance;
– addition of new fieldbus types;
– partition into multiple parts numbered 5-2, 5-3, …, 5-20.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
(dop) 2008-11-01
national standard or by endorsement
– latest date by which the national standards conflicting
(dow) 2011-02-01
with the EN have to be withdrawn
NOTE Use of some of the associated protocol types is restricted by their intellectual-property-right holders. In all cases, the
commitment to limited release of intellectual-property-rights made by the holders of those rights permits a particular data-link layer
protocol type to be used with physical layer and application layer protocols in type combinations as specified explicitly in the
EN 61784 series. Use of the various protocol types in other combinations may require permission from their respective
intellectual-property-right holders.
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61158-5-3:2007 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 61784-1 NOTE Harmonized as EN 61784-1:2008 (not modified).
IEC 61784-2 NOTE Harmonized as EN 61784-2:2008 (not modified).
__________
- 3 - EN 61158-5-3:2008
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
1) 2)
IEC 61131-1 - Programmable controllers - EN 61131-1 2003
Part 1: General information
1) 2)
IEC 61158-3-3 - Industrial communication networks - EN 61158-3-3 2008
Fieldbus specifications -
Part 3-3: Data-link layer service definition -
Type 3 elements
1) 2)
IEC 61158-4-3 - Industrial communication networks - EN 61158-4-3 2008
Fieldbus specifications -
Part 4-3: Data-link layer protocol
specification - Type 3 elements
1) 2)
IEC 61158-5-10 - Industrial communication networks - EN 61158-5-10 2008
Fieldbus specifications -
Part 5-10: Application layer service definition -
Type 10 elements
1) 2)
IEC 61158-6-3 - Industrial communication networks - EN 61158-6-3 2008
Fieldbus specifications -
Part 6-3: Application layer protocol
specification - Type 3 elements
1) 2)
IEC 61158-6-10 - Industrial communication networks - EN 61158-6-10 2008
Fieldbus specifications -
Part 6-10: Application layer protocol
specification - Type 10 elements
1) 2)
ISO/IEC 7498-1 - Information technology - Open Systems EN ISO/IEC 7498-1 1995
Interconnection - Basic Reference Model:
The Basic Model
1)
ISO/IEC 7498-3 - Information technology - Open Systems - -
Interconnection - Basic Reference Model:
Naming and addressing
1)
ISO/IEC 8822 - Information technology - Open Systems - -
Interconnection - Presentation service
definition
1)
ISO/IEC 8824 - Information technology - Open Systems - -
Interconnection - Specification of Abstract
Syntax Notation One (ASN.1)
1)
Undated reference.
2)
Valid edition at date of issue.
Publication Year Title EN/HD Year
1)
ISO/IEC 9545 - Information technology - Open Systems - -
Interconnection - Application Layer structure
1)
ISO/IEC 10731 - Information technology - Open Systems - -
Interconnection - Basic reference model -
Conventions for the definition of OSI services
IEC 61158-5-3
Edition 1.0 2007-12
INTERNATIONAL
STANDARD
Industrial communication networks – Fieldbus specifications –
Part 5-3: Application layer service definition – Type 3 elements
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
XP
ICS 25.040.40; 35.100.70 ISBN 2-8318-9445-X
– 2 – 61158-5-3 © IEC:2007(E)
CONTENTS
FOREWORD.11
INTRODUCTION.13
1 Scope.14
1.1 General .14
1.2 Overview .14
1.3 Specifications .15
1.4 Conformance.15
2 Normative references .15
3 Terms, definitions, abbreviations, symbols and conventions .16
3.1 Referenced terms and definitions .16
3.2 Fieldbus Application Layer type 3 – specific terms and definitions .17
3.3 Abbreviations and symbols .25
3.4 Conventions .25
4 Concepts .32
5 Data type ASE.32
6 Communication model specification .32
6.1 DP concepts .32
6.2 ASEs .52
6.3 Summary of FAL classes .430
6.4 Permitted FAL services by AREP role.431
6.5 Conformance classes .435
6.6 Application characteristics .436
Bibliography.438
Figure 1 – Example of DP communication with a single controlling device .35
Figure 2 – Example of DP communication with several controlling devices.35
Figure 3 – Example of DP communication between field devices.36
Figure 4 – DP-slave model (modular DP-slave).38
Figure 5 – DP-slave model (compact DP-slave) .39
Figure 6 – Overview of application processes .40
Figure 7 – DP-slave model (modular DP-slave).41
Figure 8 – Application Service Elements (ASEs) .43
Figure 9 – Application Process with application Objects (APOs).44
Figure 10 – Access to a remote APO .45
Figure 11 – Access to a remote APO for publisher/subscriber association .46
Figure 12 – Example of one AR with two AREPs.47
Figure 13 – Relation of a simple process data object to the real object .53
Figure 14 – Relation of a combined process data object to the real objects.55
Figure 15 – Sequence of an isochronous DP cycle with one DP-master (class 1).86
Figure 16 – Additional time relationships in a DP system operating in isochronous
mode .88
Figure 17 – DP system with optimized isochronous DP cycle .89
Figure 18 – Buffered synchronized isochronous mode at the DP-master (class 1).91
61158-5-3 © IEC:2007(E) – 3 –
Figure 19 – Enhanced synchronized isochronous mode at the DP-master (class 1).92
Figure 20 – Input, output and PLL state machine interaction .92
Figure 21 – PLL state diagram .98
Figure 22 – OUTPUT state diagram .102
Figure 23 – INPUT state diagram .106
Figure 24 – Treatment of an alarm in the DP system.139
Figure 25 – Load Region state diagram for erasable memory.237
Figure 26 – Load region state diagram for non erasable memory .238
Figure 27 – Function invocation state diagram .270
Figure 28 – System architecture.284
Figure 29 – Assignment of communication relationship to application relationship .291
Figure 30 – MS0 application relationship.297
Figure 31 – Output buffer model of a DP-slave without sync functionality.298
Figure 32 – Output buffer model of a DP-slav
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.