EN IEC 60684-3-280:2019

Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 280: Heat-shrinkable, polyolefin sleeving, anti-tracking

IEC 60684-3-280:2019 is available as IEC 60684-3-280:2019 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition. IEC 69684-3-280:2019 gives the requirements for heat-shrinkable, polyolefin sleeving, anti-tracking with a nominal shrink ratio of 3:1. This sleeving has been found suitable for use at temperatures up to 100 °C. Typically: medium wall, internal diameter up to 110 mm. This sleeving is normally supplied in the colours red or brown. Since these types of sleeving cover a significantly large range of sizes and wall thicknesses, Annex A (Table A.1) provides guidance on the range of sizes available. The actual size will be agreed between the user and the supplier. Materials which conform to this specification meet established levels of performance. However, the selection of a material by a user for a specific application will be based on the actual requirements necessary for adequate performance in that application and not based on this specification alone. This sleeving is designed to be used in medium voltage cable accessories and as such electrical performance willbe proven as part of the assembly. Examples of this are described in HD 629.1 and IEC 60502 (all parts). This second edition cancels and replaces the first edition published in 2010 and Amendment 1:2013. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - change of moulded plaque thickness for resistance to tracking and weathering tests to (6 ± 0,5) mm. Keywords: Heat-shrinkable, polyolefin sleeving, anti-tracking

Isolierschläuche - Teil 3: Anforderungen für einzelne Schlauchtypen - Blatt 280: Polyolefin-Wärmeschrumpfschläuche, kriechstromfest

Gaines isolantes souples - Partie 3: Spécifications pour types particuliers de gaines - Feuille 280: Gaines thermorétractables, en polyoléfine, anticheminement

IEC 60684-3-280:2019 est disponible sous forme de IEC 60684-3-280:2019 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente. IEC 60684-3-280:2019 donne les exigences relatives aux gaines thermorétractables, en polyoléfine, anticheminement, présentant un rapport de rétreint nominal de 3:1. Ces gaines se sont avérées appropriées pour une utilisation à des températures allant jusqu’à 100 °C. Généralement: paroi moyenne, diamètre intérieur jusqu’à 110 mm. Ces gaines sont normalement disponibles en rouge ou en brun. Comme ces types de gaines couvrent une plage très étendue de tailles et d’épaisseurs de paroi, l'Annexe A (Tableau A.1) donne des recommandations sur la plage des tailles disponibles. La taille réelle fait l’objet d’un accord entre l’utilisateur et le fournisseur. Les matériaux conformes à la présente spécification satisfont à des niveaux de performances établis. Cependant, le choix d’un matériau par un utilisateur, pour une application spécifique, est fondé sur les exigences réelles nécessaires pour obtenir des performances adéquates pour l'application concernée, et n'est pas fondé sur cette seule spécification.Anchor Cette gaine est conçue pour être utilisée dans des accessoires de câbles moyenne tension, et, en conséquence, les performances électriques sont prouvées dans le cadre de l’assemblage. Des exemples sont décrits dans le HD 629.1 et dans l'IEC 60502 (toutes les parties). Cette deuxième édition annule et remplace la première édition parue en 2010 et l'Amendement 1:2013. Cette édition constitue une révision technique. La présente édition inclut la modification technique majeure suivante par rapport à l'édition précédente: - modification de l'épaisseur des plaques moulées pour les essais de résistance aux courants de cheminement et les essais de résistance aux intempéries qui devient (6 ± 0,5) mm. Mots-clés: Gaines thermorétractables, en polyoléfine, anticheminement

Gibke izolacijske cevi - 3. del: Specifikacije za posamezne tipe cevi - 280. list: Toplotno skrčljive poliolefinske cevi za zaščito pred poškodbami (IEC 60684-3-280:2019)

Ta dokument podaja zahteve za toplotno skrčljive poliolefinske cevi za zaščito pred poškodbami z nazivnimi razmerji krčenja do 3:1. Te cevi so primerne za uporabo pri temperaturi do 100 °C. Običajno: srednje debela stena, notranji premer do 110 mm. Te cevi so običajno dobavljive v rdeči ali rjavi barvi. Ker ti tipi cevi zajemajo bistveno velik razpon velikosti in debelin sten, so v preglednici A.1 v dodatku A podana navodila glede razpona razpoložljivih velikosti. O dejanski velikosti se dogovorita uporabnik in dobavitelj. Materiali, ki so skladni s to specifikacijo, ustrezajo določenim ravnem delovanja. Vendar uporabnik bo material za določeno uporabo izbral glede na dejanske zahteve, ki omogočajo ustrezno delovanje pri tej uporabi, in ne samo na podlagi te specifikacije. Ta cev je zasnovana za uporabo s srednjenapetostnimi kabli, zato se kot del sestava preverja tudi električna zmogljivost. Primeri tega so opisani v standardih HD 629.1 in IEC 60502 (vsi deli).

General Information

• Status: Published
• Publication Date: 17-Oct-2019
• Withdrawal Date: 23-Sep-2022
• ICS: 29.035.20 - Plastics and rubber insulating materials
• Technical Committee: CLC/SR 15 - Insulating materials
• Drafting Committee: IEC/TC 15 - IEC_TC_15
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 18-Oct-2019
• Completion Date: 18-Oct-2019
• Ref Project: SIST EN IEC 60684-3-280:2019 - Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 280: Heat-shrinkable, polyolefin sleeving, anti-tracking (IEC 60684-3-280:2019)

Relations

• Replaces: EN 60684-3-280:2010/A1:2014 - Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 280: Heat-shrinkable, polyolefin sleeving, anti-tracking
• Effective Date: 22-Oct-2019
• Replaces: EN 60684-3-280:2010 - Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 280: Heat-shrinkable, polyolefin sleeving, anti-tracking
• Effective Date: 21-Aug-2018

Overview

EN IEC 60684-3-280:2019 (CLC adoption of IEC 60684-3-280:2019) defines requirements for heat-shrinkable, polyolefin sleeving, anti-tracking. It covers products with a nominal shrink ratio of 3:1, typically medium wall construction, suitable for use at temperatures up to 100 °C, and available in internal diameters up to 110 mm. The sheet includes specification, test conditions and guidance on sizes (Annex A). This second edition is a technical revision of the 2010 edition and updates test specimen thickness for tracking and weathering to (6 ± 0.5) mm.

Key topics and technical requirements

• Product scope and designation
  • Sleeving identification format is specified (example: Sleeving IEC 60684-3-280-60,0/19,0-Red X).
• Material and performance focus
  • Polyolefin, heat-shrinkable material with anti-tracking properties for improved surface insulation under contaminated conditions.
• Mechanical and thermal tests
  • Samples are pre-shrunk (forced-air oven, 200 °C ± 3 K, for 10 ± 1 min) prior to testing.
  • Requirements and test methods referenced to IEC 60684-2 (methods) and IEC 60684-1 (general requirements).
  • Tables in the standard list property requirements (dimensions, heat shock, tensile strength, elongation, dielectric strength, resistance to selected fluids, and additional properties).
• Test specimen specification
  • Conformance testing is normally based on typical recovered internal diameters (e.g., 20 mm to 30 mm).
  • Revised molded plaque thickness for tracking/weathering tests now (6 ± 0.5) mm.
• Supply options
  • Typically supplied in red or brown; sizes and wall thickness ranges are for agreement between supplier and purchaser (Table A.1 guidance).

Applications

• Designed primarily for medium-voltage cable accessories where anti-tracking surface properties are required.
• Common uses:
  • Insulation and protection of joints and terminations in cables
  • Areas exposed to contamination, moisture or potential surface tracking
• Electrical performance in final assemblies is proven as part of the accessory (see HD 629.1 and IEC 60502 for examples).

Who should use this standard

• Cable accessory manufacturers and material suppliers
• Design and specification engineers (power distribution, utilities)
• Test laboratories and conformity assessment bodies
• Procurement and quality managers specifying heat-shrink sleeving for medium-voltage applications

Related standards

• IEC 60684-1 (Definitions & general requirements)
• IEC 60684-2 (Methods of test)
• HD 629.1 and IEC 60502 (examples of medium-voltage assemblies)
• IEC 60296, IEC 60757, ISO 846, ISO 4892-3 (normative references)

Keywords: EN IEC 60684-3-280:2019, heat-shrinkable polyolefin sleeving, anti-tracking, medium-voltage cable accessories, CLC.

Standards Content (Sample)

SLOVENSKI STANDARD
01-december-2019
Nadomešča:
SIST EN 60684-3-280:2010
SIST EN 60684-3-280:2010/A1:2014
Gibke izolacijske cevi - 3. del: Specifikacije za posamezne tipe cevi - 280. list:
Toplotno skrčljive poliolefinske cevi za zaščito pred poškodbami (IEC 60684-3-
280:2019)
Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet
280: Heat-shrinkable, polyolefin sleeving, anti-tracking (IEC 60684-3-280:2019)
Isolierschläuche - Teil 3: Anforderungen für einzelne Schlauchtypen - Blatt 280:
Polyolefin-Wärmeschrumpfschläuche, kriechstromfest (IEC 60684-3-280:2019)
Gaines isolantes souples - Partie 3: Spécifications pour types particuliers de gaines -
Feuille 280: Gaines thermorétractables, en polyoléfine, anti-cheminement (IEC 60684-3-
280:2019)
Ta slovenski standard je istoveten z: EN IEC 60684-3-280:2019
ICS:
29.035.20 Plastični in gumeni izolacijski Plastics and rubber insulating
materiali materials
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN IEC 60684-3-280

NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2019
ICS 29.035.20 Supersedes EN 60684-3-280:2010 and all of its
amendments and corrigenda (if any)
English Version
Flexible insulating sleeving - Part 3: Specifications for individual
types of sleeving - Sheet 280: Heat-shrinkable, polyolefin
sleeving, anti-tracking
(IEC 60684-3-280:2019)
Gaines isolantes souples - Partie 3: Spécifications pour Isolierschläuche - Teil 3: Anforderungen für einzelne
types particuliers de gaines - Feuille 280: Gaines Schlauchtypen - Blatt 280: Polyolefin-
thermorétractables, en polyoléfine, anticheminement Wärmeschrumpfschläuche, kriechstromfest
(IEC 60684-3-280:2019) (IEC 60684-3-280:2019)
This European Standard was approved by CENELEC on 2019-09-24. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.

European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 60684-3-280:2019 E

European foreword
The text of document 15/891/FDIS, future edition 2 of IEC 60684-3-280, prepared by IEC/TC 15 "Solid
electrical insulating materials" was submitted to the IEC-CENELEC parallel vote and approved by
CENELEC as EN IEC 60684-3-280:2019.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2020-06-24
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2022-09-24
document have to be withdrawn
This document supersedes EN 60684-3-280:2010 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.

Endorsement notice
The text of the International Standard IEC 60684-3-280:2019 was approved by CENELEC as a
European Standard without any modification.

In the official version, for Bibliography, the following note has to be added for the standard indicated:
IEC 60684-3 (series) NOTE Harmonized as EN 60684-3-420 to 422 (series)

Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments)
applies.
NOTE 1  Where an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2  Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 60296 2012 Fluids for electrotechnical applications - Unused EN 60296 2012
mineral insulating oils for transformers and
switchgear
IEC 60684-1 2003 Flexible insulating sleeving - Part 1: Definitions EN 60684-1 2003
and general requirements
IEC 60684-2 2011 Flexible insulating sleeving - Part 2: Methods of EN 60684-2 2011
test
IEC 60757 1983 Code for designation of colours HD 457 S1 1985
ISO 846 2019 Plastics - Evaluation of the action of micro- EN ISO 846 2019
organisms
ISO 4892-3 2016 Plastics - Methods of exposure to laboratory light EN ISO 4892-3 2016
sources - Part 3: Fluorescent UV lamps

IEC 60684-3-280 ®
Edition 2.0 2019-08
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Flexible insulating sleeving –

Part 3: Specifications for individual types of sleeving –

Sheet 280: Heat-shrinkable, polyolefin sleeving, anti-tracking

Gaines isolantes souples –
Partie 3: Spécifications pour types particuliers de gaines –

Feuille 280: Gaines thermorétractables, en polyoléfine, anticheminement

INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.035.20 ISBN 978-2-8322-7214-5

– 2 – IEC 60684-3-280:2019 © IEC 2019
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 7
4 Designation . 7
5 Conditions of test . 7
6 Requirements . 7
7 Sleeving conformance . 7
Annex A (informative) Guidance on the available sizes and wall thicknesses . 11
Bibliography . 12

Table 1 – Property requirements . 8
Table 2 – Requirements for dielectric strength . 9
Table 3 – Resistance to selected fluids . 10
Table 4 – Additional property requirements . 10
Table A.1 – Guidance on the available sizes and wall thicknesses . 11

IEC 60684-3-280:2019 © IEC 2019 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FLEXIBLE INSULATING SLEEVING –

Part 3: Specifications for individual types of sleeving –
Sheet 280: Heat-shrinkable, polyolefin sleeving, anti-tracking

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this pub
...