EN 61753-021-3:2013
(Main)Fibre optic interconnecting devices and passive components - Performance standard - Part 021-3: Single-mode fibre optic connectors for category U - Uncontrolled environment
Fibre optic interconnecting devices and passive components - Performance standard - Part 021-3: Single-mode fibre optic connectors for category U - Uncontrolled environment
IEC 61753-021-3:2012(E) defines minimum initial test and measurement requirements and severities which a single-mode connector, either part of a pigtail, or part of a cord, must satisfy in order to be categorized as meeting the IEC standard category U (uncontrolled environment). Keywords: single-mode connector, category U
Lichtwellenleiter – Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil 021-3: Lichtwellenleiter-Steckverbinder für Einmodenfasern für die Kategorie U – Unkontrollierte Umgebung
Dispositifs d’interconnexion et composants passives à fibres optiques - Norme de performance - Partie 021-3: Connecteurs à fibres optiques unimodales pour la catégorie U - Environnement non contrôlé
IEC 61753-021-3: 2012 définit les exigences minimales d’essai et de mesure initiales et les sévérités auxquelles un connecteur unimodal, qu'il fasse partie d'une fibre amorce ou d'un cordon, doit satisfaire pour être classé comme répondant à la catégorie U de l’IEC (environnement non contrôlé).
Optični spojni elementi in pasivne komponente - Tehnični standard - 021-3. del: Konektorji za enorodna optična vlakna za kategorijo U - Nenadzorovano okolje (IEC 61753-021-3:2012)
Ta del standarda IEC 61753 določa najmanjše začetne zahteve in stopnje zahtevnosti za preskuse in meritve, ki jih mora izpolnjevati konektor za enorodna vlakna, ki je del zaključnega kabla ali del kabla, da ustreza zahtevam kategorije U v standardu IEC (nenadzorovano okolje).
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-maj-2013
2SWLþQLVSRMQLHOHPHQWLLQSDVLYQHNRPSRQHQWH7HKQLþQLVWDQGDUGGHO
.RQHNWRUML]DHQRURGQDRSWLþQDYODNQD]DNDWHJRULMR81HQDG]RURYDQRRNROMH
,(&
Fibre optic interconnecting devices and passive components - Performance standard -
Part 021-3: Single-mode fibre optic connectors for category U - Uncontrolled
environment (IEC 61753-021-3:2012)
Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil
021-3: Lichtwellenleiter-Steckverbinder für Einmodenfasern für die Kategorie U -
Unkontrollierte Umgebung (IEC 61753-021-3:2012)
Dispositifs d’interconnexion et composants passives à fibres optiques - Norme de
performance - Partie 021-3: Connecteurs à fibres optiques unimodales pour la catégorie
U - Environnement non contrôlé (CEI 61753-021-3:2012)
Ta slovenski standard je istoveten z: EN 61753-021-3:2013
ICS:
33.180.20 3RYH]RYDOQHQDSUDYH]D Fibre optic interconnecting
RSWLþQDYODNQD devices
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 61753-021-3
NORME EUROPÉENNE
March 2013
EUROPÄISCHE NORM
ICS 33.180.20
English version
Fibre optic interconnecting devices and passive components -
Performance standard -
Part 021-3: Single-mode fibre optic connectors for category U -
Uncontrolled environment
(IEC 61753-021-3:2012)
Dispositifs d’interconnexion et Lichtwellenleiter - Verbindungselemente
composants passives à fibres optiques - und passive Bauteile -
Norme de performance - Betriebsverhalten -
Partie 021-3: Connecteurs à fibres Teil 021-3: Lichtwellenleiter-
optiques unimodales pour la catégorie U - Steckverbinder für Einmodenfasern für die
Environnement non contrôlé Kategorie U - Unkontrollierte Umgebung
(CEI 61753-021-3:2012) (IEC 61753-021-3:2012)
This European Standard was approved by CENELEC on 2013-01-09. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2013 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61753-021-3:2013 E
Foreword
The text of document 86B/3495/FDIS, future edition 1 of IEC 61753-021-3, prepared by SC 86B, "Fibre
optic interconnecting devices and passive components", of IEC TC 86, "Fibre optics" was submitted to the
IEC-CENELEC parallel vote and approved by CENELEC as EN 61753-021-3:2013.
The following dates are fixed:
• latest date by which the document (dop) 2013-10-09
has to be implemented at national
level by publication of an identical
national
standard or by endorsement
• latest date by which the national (dow) 2016-01-09
standards conflicting with the
document have to be withdrawn
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.
Endorsement notice
The text of the International Standard IEC 61753-021-3:2012 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 61300-2-19 NOTE Harmonized as EN 61300-2-19.
IEC 61755-3 series NOTE Harmonized in EN 61755-3 series.
- 3 - EN 61753-021-3:2013
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
IEC 60793-2-50 2008 Optical fibres - EN 60793-2-50 2008
Part 2-50: Product specifications - Sectional
specification for class B single-mode fibres
IEC 61300-2-1 - Fibre optic interconnecting devices and EN 61300-2-1 -
passive components - Basic test and
measurement procedures -
Part 2-1: Tests - Vibration (sinusoidal)
IEC 61300-2-2 - Fibre optic interconnecting devices and EN 61300-2-2 -
passive components - Basic test and
measurement procedures -
Part 2-2: Tests - Mating durability
IEC 61300-2-4 - Fibre optic interconnecting devices and EN 61300-2-4 -
passive components - Basic test and
measurement procedures -
Part 2-4: Tests - Fibre/cable retention
IEC 61300-2-6 - Fibre optic interconnecting devices and EN 61300-2-6 -
passive components - Basic test and
measurement procedures -
Part 2-6: Tests - Tensile strength of coupling
mechanism
IEC 61300-2-12 2009 Fibre optic interconnecting devices and EN 61300-2-12 2009
+ corr. June 2011 passive components - Basic test and
measurement procedures -
Part 2-12: Tests - Impact
IEC 61300-2-17 - Fibre optic interconnecting devices and EN 61300-2-17 -
passive components - Basic test and
measurement procedures -
Part 2-17: Tests - Cold
IEC 61300-2-18 - Fibre optic interconnecting devices and EN 61300-2-18 -
passive components - Basic test and
measurement procedures -
Part 2-18: Tests - Dry heat - High temperature
endurance
IEC 61300-2-22 - Fibre optic interconnecting devices and EN 61300-2-22 -
passive components - Basic test and
measurement procedures -
Part 2-22: Tests - Change of temperature
IEC 61300-2-42 - Fibre optic interconnecting devices and EN 61300-2-42 -
passive components - Basic test and
measurement procedures -
Part 2-42: Tests - Static side load for
connectors
Publication Year Title EN/HD Year
IEC 61300-2-44 - Fibre optic interconnecting devices and EN 61300-2-44 -
passive components - Basic test and
measurement procedures -
Part 2-44: Tests - Flexing of the strain relief of
fibre optic devices
IEC 61300-3-3 - Fibre optic interconnecting devices and EN 61300-3-3 -
passive components - Basic test and
measurement procedures -
Part 3-3: Examinations and measurements -
Active monitoring of changes in attenuation
and return loss
IEC 61300-3-4 - Fibre optic interconnecting devices and EN 61300-3-4 -
passive components - Basic test and
measurement procedures -
Part 3-4: Examinations and measurements -
Attenuation
IEC 61300-3-6 - Fibre optic interconnecting devices and EN 61300-3-6 -
passive components - Basic test and
measurement procedures -
Part 3-6: Examinations and measurements -
Return loss
IEC 61300-3-28 - Fibre optic interconnecting devices and EN 61300-3-28 -
passive components - Basic test and
measurement procedures -
Part 3-28: Examinations and measurements -
Transient loss
IEC 61300-3-34 - Fibre optic interconnecting devices and EN 61300-3-34 -
passive components - Basic test and
measurement procedures -
Part 3-34: Examinations and measurements -
Attenuation of random mated connectors
IEC 61753-1 2007 Fibre optic interconnecting devices and EN 61753-1 2007
passive components performance standard -
Part 1: General and guidance for performance
standards
IEC 61754 Series Fibre optic connector interfaces EN 61754 Series
IEC 61755 Series Fibre optic connector optical interfaces EN 61755 Series
IEC 61753-021-3 ®
Edition 1.0 2012-12
INTERNATIONAL
STANDARD
Fibre optic interconnecting devices and passive components – Performance
standard –
Part 021-3: Single-mode fibre optic connectors for category U – Uncontrolled
environment
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
R
ICS 33.180.20 ISBN 978-2-83220-490-0
– 2 – 61753-021-3 © IEC:2012(E)
CONTENTS
FOREWORD . 3
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 6
4 Tests . 6
5 Test report . 7
6 Reference components . 7
7 Performance requirements . 7
7.1 Dimensions . 7
7.2 Sample size . 7
7.3 Connector set sample test configuration . 7
7.4 Cord sample test configuration . 8
7.5 Optical Interface requirements . 8
7.6 Performance criteria . 8
7.7 Performance details . 10
Annex A (normative) Sample size . 17
Bibliography . 18
Figure 1 – Pigtail assembly . 8
Figure 2 – Cord assembly . 8
Table 1 – Requirements for different performance levels . 8
Table 2 – Performance details . 10
Table A.1 – Sample size . 17
61753-021-3 © IEC:2012(E) – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
FIBRE OPTIC INTERCONNECTING DEVICES AND
PASSIVE COMPONENTS – PERFORMANCE STANDARD –
Part 021-3: Single-mode fibre optic connectors for category U –
Uncontrolled environment
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they a
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.