Plasma display panels - Part 5: Generic specification

IEC 61988-5:2009 is a generic specification for plasma display panels specifies general procedures for quality assessment to be used in the IECQ-CECC system and establishes general principles for describing and testing of electrical, optical, mechanical and environmental characteristics.

Plasmabildschirme - Teil 5: Fachgrundspezifikation

Panneaux d'affichage à plasma - Partie 5: Spécification générique

La CEI 61988-5:2009 est une spécification générique, relative aux panneaux d'affichage à plasma, définit les procédures générales pour l'assurance de la qualité à utiliser dans le système IECQ-CECC et établit des principes généraux pour décrire et mesurer les caractéristiques électriques, optiques, mécaniques et de tenue à l'environnement.

Plošče s plazemskimi prikazovalniki - 5. del: Rodovna specifikacija (IEC 61988-5:2009)

Ta rodovna specifikacija za plošče s plazemskimi prikazovalniki podaja splošne postopke za ocenjevanje kakovosti, ki se uporabljajo v IECQ-CECC sistemu (IEC sistem za ugotavljanje kakovosti elektronskih elementov - CENELEC združenje elektronskih komponent), ter vzpostavlja splošna načela za opisovanje in preskušanje električnih, optičnih, mehanskih in okoljskih značilnosti.

General Information

Status
Published
Publication Date
17-Dec-2009
Withdrawal Date
30-Nov-2012
Drafting Committee
Parallel Committee
Current Stage
6060 - Document made available - Publishing
Start Date
18-Dec-2009
Completion Date
18-Dec-2009

Buy Standard

Standard
EN 61988-5:2010
English language
27 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61988-5:2010
01-februar-2010
3ORãþHVSOD]HPVNLPLSULND]RYDOQLNLGHO5RGRYQDVSHFLILNDFLMD ,(&

Plasma display panels - Part 5: Generic specification (IEC 61988-5:2009)
Plasmabildschirme - Teil 5: Fachgrundspezifikation (IEC 61988-5:2009)
Panneaux d'affichage à plasma - Partie 5: Spécifications génériques (IEC 61988-5:2009)
Ta slovenski standard je istoveten z: EN 61988-5:2009
ICS:
31.260 Optoelektronika, laserska Optoelectronics. Laser
oprema equipment
SIST EN 61988-5:2010 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61988-5:2010

---------------------- Page: 2 ----------------------

SIST EN 61988-5:2010

EUROPEAN STANDARD
EN 61988-5

NORME EUROPÉENNE
December 2009
EUROPÄISCHE NORM

ICS 31.260


English version


Plasma display panels -
Part 5: Generic specification
(IEC 61988-5:2009)


Panneaux d'affichage à plasma -  Plasmabildschirme -
Partie 5: Spécification générique Teil 5: Fachgrundspezifikation
(CEI 61988-5:2009) (IEC 61988-5:2009)




This European Standard was approved by CENELEC on 2009-12-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: Avenue Marnix 17, B - 1000 Brussels


© 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61988-5:2009 E

---------------------- Page: 3 ----------------------

SIST EN 61988-5:2010
EN 61988-5:2009 - 2 -
Foreword
The text of document 110/182/FDIS, future edition 1 of IEC 61988-5, prepared by IEC TC 110, Flat panel
display devices, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as
EN 61988-5 on 2009-12-01
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2010-09-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2012-12-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61988-5:2009 was approved by CENELEC as a European
Standard without any modification.
__________

---------------------- Page: 4 ----------------------

SIST EN 61988-5:2010
- 3 - EN 61988-5:2009
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.

Publication Year Title EN/HD Year


IEC 60027 Series Letter symbols to be used in electrical EN 60027 Series
technology


IEC 60050 Series International electrotechnical vocabulary - -


IEC 60410 1973 Sampling plans and procedures for inspection - -
by attributes


IEC 60617 Graphical symbols for diagrams - -
Data-
base


1)
IEC 60747-1 - Semiconductor devices - - -
Part 1: General


1) 2)
IEC 61988-1 - Plasma display panels - EN 61988-1 2003
Part 1: Terminology and letter symbols


1) 2)
IEC 61988-2-1 - Plasma display panels - EN 61988-2-1 2002
Part 2-1: Measuring methods - Optical


1) 2)
IEC 61988-2-2 - Plasma display panels - EN 61988-2-2 2003
Part 2-2: Measuring methods - Optoelectrical


1) 2)
IEC 61988-3-1 - Plasma display panels - EN 61988-3-1 2005
Part 3-1: Mechanical in
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.