Portable multimedia equipment - Determination of battery duration - Part 2: Headphones and earphones with active noise-cancelling functions

IEC 63296-2:2023 is applicable to active acoustic noise-cancelling headphones and earphones that have the function of reducing the ambient noise heard by the user by the level of the output sound from the transducer, which is generated by the ambient noise detection microphone and the noise reduction signal processing circuit. This document covers headphones and earphones to be worn over-the-ear or in-ear, all of which are referred to as "headphones" in this document. This document specifies the terms and definitions relating to battery duration of this type of headphones and the measurement and evaluation methods. The noise-detection microphones are mounted in the body, on the surface, or on an accessory of the headphones. Signal-processing circuits are analogue and digital electronic circuits. This document does not deal with equipment intended for hearing protection. It is also not applicable to music players, recorders, etc. that have a noise-cancelling function. The battery duration measurement methods can be applied to headphones having no active noise-cancelling function.

Tragbare Multimediageräte und -systeme - Bestimmung der Batterielebensdauer - Teil 2: Kopfhörer und Ohrhörer mit aktiven Funktionen zur Geräuschunterdrückung

Matériel multimédia portable - Détermination de la durée des batteries - Partie 2: Casques et écouteurs avec fonctions de réduction de bruit active

L'IEC 63296-2:2023 s'applique aux casques et écouteurs à réduction du bruit acoustique active dont la fonction est de réduire le bruit ambiant entendu par l'utilisateur en agissant sur le niveau du son obtenu en sortie du transducteur qui est généré par le microphone de détection du bruit ambiant et le circuit de traitement du signal de réduction du bruit. Le présent document couvre les casques et les écouteurs supra-auriculaires et intra‑auriculaires, qui sont tous désignés par le terme "casques" dans le présent document. Le présent document spécifie les termes et définitions qui concernent la durée des batteries de ce type de casques ainsi que les méthodes de mesurage et d'évaluation. Les microphones de détection du bruit sont montés dans le corps, à la surface ou sur un accessoire des casques. Les circuits de traitement du signal sont des circuits électroniques analogiques et numériques. Le présent document ne traite pas des matériels destinés à la protection auditive. Il ne s'applique pas non plus aux lecteurs de musique, aux enregistreurs, etc. qui possèdent une fonction de réduction du bruit. Les méthodes de mesurage de la durée des batteries peuvent être appliquées aux casques qui n'ont pas de fonction de réduction de bruit active.

Prenosna multimedijska oprema - Določanje življenjske dobe baterije - 2. del: Naglavne in ušesne slušalke s funkcijo aktivnega dušenja hrupa

General Information

Status
Published
Publication Date
18-Jan-2024
Current Stage
6060 - Document made available - Publishing
Start Date
19-Jan-2024
Due Date
06-Dec-2024
Completion Date
19-Jan-2024

Buy Standard

Draft
prEN IEC 63296-2:2023 - BARVE
English language
13 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
oSIST prEN IEC 63296-2:2023
01-maj-2023
Prenosna multimedijska oprema - Določanje življenjske dobe baterije - 2. del:
Naglavne in ušesne slušalke s funkcijo aktivnega dušenja hrupa
Portable multimedia equipment - Determination of battery duration - Part 2: Headphones
and earphones with active noise cancelling functions
Ta slovenski standard je istoveten z: prEN IEC 63296-2:2023
ICS:
33.160.50 Pribor Accessories
oSIST prEN IEC 63296-2:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

oSIST prEN IEC 63296-2:2023
1 oSIST prEN IEC 63296-2:2023
100/3884/CDV
COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 63296-2 ED1
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2023-03-24 2023-06-16
SUPERSEDES DOCUMENTS:
100/3779/CD, 100/3827A/CC
IEC TA 19 : ENVIRONMENTAL AND ENERGY ASPECTS FOR MULTIMEDIA SYSTEMS AND EQUIPMENT
SECRETARIAT: SECRETARY:
Germany Mr Andreas Schneider
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:

TA 20
Other TC/SCs are requested to indicate their interest, if
any, in this CDV to the secretary.
FUNCTIONS CONCERNED:
EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft
for Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.
This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of
• any relevant patent rights of which they are aware and to provide supporting documentation,
• any relevant “in some countries” clauses to be included should this proposal proceed. Recipients are
reminded that the enquiry stage is the final stage for submitting "in some countries" clauses. See
AC/22/2007.
TITLE:
Portable multimedia equipment – Determination of battery duration – Part 2: Headphones and
earphones with active noise cancelling functions

PROPOSED STABILITY DATE: 2027
NOTE FROM TC/SC OFFICERS:
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.

oSIST prEN IEC 63296-2:2023
– 2 – IEC CDV 63296-2  IEC:2023
4 CONTENTS
6 FOREWORD . 3
7 INTRODUCTION . 5
8 1 Scope . 6
9 2 Normative references . 6
10 3 Terms and definitions . 7
11 4 Measuring method of battery duration . 8
12 4.1 General . 8
13 4.2 Test signal . 8
14 4.3 Environmental noise signal . 8
15 4.4 Standard conditions for Measurement . 8
16 4.4.1 General conditions for measurement . 8
17 4.4.2 Test site . 8
18 4.5 Test equipment . 8
19 4.6 Battery to be measured . 8
20 4.7 Test procedure for measurement of battery duration . 9
21 4.7.1 Adjustment of test signal level . 9
22 4.7.2 Adjustment of loudness of environmental noise signal . 9
23 4.7.3 Measurement of battery duration . 9
24 5 Characteristics to be specified . 10
25 Annex A (informative) Verification procedure . 11
26 A.1 General . 11
27 A.2 Verification procedure . 11
28 Bibliography . 13
30 Figure 1 – Example of battery duration measurement system . 9
31 Figure A.1 – Flowchart, verification procedure . 11
oSIST prEN IEC 63296-2:2023
IEC CDV 63296-2  IEC:2023 – 3 –
34 INTERNATIONAL ELECTROTECHNICAL COMMISSION
35 ____________
37 PORTABLE MULTIMEDIA EQUIPMENT –
38 DETERMINATION OF BATTERY DURATION –
40 Part 2: Headphones and earphones with
41 active noise cancelling functions
44 FOREWORD
45 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
46 all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
47 co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
48 in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
49 Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
50 preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
51 may participate in this preparatory work. International, governmental and non-governmental organizations liaising
52 with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
53 Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
54 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
55 consensus of opinion on the relevant subjects since each technical committee has representation from all
56 interested IEC National Committees.
57 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
58 Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
59 Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
60 misinterpretation by any end user.
61 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
62 transparently to the maximum extent possible in their national and regional publications. Any divergence between
63 any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
64 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
65 assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
66 services carried out by independent certification bodies.
67 6) All users should ensure that they have the latest edition of this publication.
68 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
69 members of its technical committees and IEC National Committees for any personal injury, property damage or
70 other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
71 expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
72 Publications.
73 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
74 indispensable for the correct application of this publication.
75 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
76 rights. IEC shall not be held responsible for identifying any or all such patent rights.
77 IEC 63296-2 has been prepared by technical area 19: Environmental and energy aspects for
78 multimedia systems and equipment, of IEC technical committee 100: Audio, video and
79 multimedia systems and equipment. It is an International Standard.
80 The text of this International Standard is based on the following documents:
FDIS Report on voting
XX/XX/FDIS XX/XX/RVD
82 Full information on the voting for the approval of this International Standard can be found in the
83 report on voting indicated in the above table.
84 The language used for the development of this International Standard is English.

oSIST prEN IEC 63296-2:2023
– 4 – IEC CDV 63296-2  IEC:2023
85 A list of all parts in the IEC 63296 series, published under the general title Portable multimedia
86 equipment – Determination of battery duration, can be found on the IEC website.
87 This document has been drafted in accordance with the ISO/IEC Directives, Part 2, and
88 developed in accordance with ISO/IEC Directives, Part 1 and ISO/IEC Directives, IEC
89 Supplement, available at www.iec.ch/members_experts/refdocs. The main document types
90 developed by IEC are described in greater detail at www.iec.ch/standardsdev/publications.
91 The committee has decided that the contents of this document will remain unchanged until the
92 stability date indicated on the IEC website under "http://webstore.iec.ch" in the data related to
93 the specific document. At this date, the document will be
94 • reconfirmed,
95 • withdrawn,
96 • replaced by a revised edition, or
97 • amended.
oSIST prEN IEC 63296-2:2023
IEC CDV 63296-2  IEC:2023 – 5 –
100 INTRODUCTION
101 This document specifies a measurement method for battery duration on active acoustic noise
102 cancelling headphones and earphones. Active acoustic noise cancelling headphones and
103 earphones are commonly used to reduce the environmental acoustic noise to which the ear is
104 exposed. However, there is no international standard for a battery duration measurement
105 method of active acoustic noise cancelling headphones and earphones. Each company
106 evaluated the performance using its own method, and the evaluation values were not uniform.
107 This standard for the measurement of the battery duration and the notation of measured value
108 allows the comparison of performance data obtained in different locations.
109 IEC 63296 series currently consists of the following planned or published parts:
110 – Part 1: Powered loudspeaker equipment
111 – Part 2: Headphones and earphones with active noise-cancelling functions
oSIST prEN IEC 63296-2:2023
– 6 – IEC CDV 63296-2  IEC:2023
114 PORTABLE MULTIMEDIA EQUIPMENT –
115 DETERMINATION OF BATTERY DURATION –
117 Part 2: Headphones and earphones with
118 active noise cancelling functions
122 1 Scope
123 This document is applicable to active acoustic noise cancelling headphones and earphones
124 which have the function of reducing the noise heard by the user by the output sound from the
125 transducer generated by the environment noise detection microphone and the noise reduction
126 signal processing circuit.
127 This document specifies the terms and definitions relating battery duration of this type of
128 headphones or earphones and the measurement and evaluation methods.
129 This document covers headphones and earphones to be worn over-the-ear or in-ear, all of which
130 are referred to as headphones in this document.
131 The noise detection microphones are mounted in the body, on the surface, or on an accessory
132 of the headphones or earphones. Signal processing circuits are analogue and digital electronic
133 circuits.
134 This document does not deal with equipment intended for hearing protection. It is also not
135 applicable to music players, recorders, etc. that have a noise cancelling function.
136 The battery duration measurement methods may be applied to headphones and earphones
137 having no active noise cancelling function.
138 2 Normative references
139 The following documents are referred to in the text in such a way that some or all of their content
140 constitutes requirements of this document. For dated references, only the edition cited applies.
141 For undated references, the latest edition of the referenced document (including any
142 amendments) applies.
143 IEC 60268-1:1985, Sound system equipment. Part 1: General
144 IEC 60068-1:2013, Environmental testing - Part 1: General and guidance
145 IEC 60268-7:2010, Sound system equipment - Part 7: Headphones and earphones
146 IEC 60318-4:2010, Electroacoustics – Simulators of human head and ear – Part 4:
147 Occluded-ear simulator for the measurement of earphones coupled to the ear by means of ear
148 inserts
149 IEC 60318-7:2017, Electroacoustics – Simulators of human head and ear – Part 7: Head
150 and torso simulator for the measurement of air-conduction hearing aids
151 IEC
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.