EN 55016-2-3:2017

Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements

CISPR 16-2-3:2016 is available as CISPR 16-2-3:2016 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.
CISPR 16-2-3:2016 specifies the methods of measurement of radiated disturbance phenomena in the frequency range of 9 kHz to 18 GHz. The aspects of measurement uncertainty are specified in CISPR 16-4-1 and CISPR 16-4-2. It has the status of a basic EMC publication in accordance with IEC Guide 107, "Electromagnetic compatibility - Guide to the drafting of electromagnetic compatibility publications". This fourth edition edition cancels and replaces the third edition published in 2010, its Amendment 1:2010 and its Amendment 2:2014. This edition constitutes a technical revision.

Anforderungen an Geräte und Einrichtungen sowie Festlegung der Verfahren zur Messung der hochfrequenten Störaussendung (Funkstörungen) und Störfestigkeit - Teil 2-3: Verfahren zur Messung der hochfrequenten Störaussendung (Funkstörungen) und Störfestigkeit – Messung der gestrahlten Störaussendung

Spécifications des méthodes et des appareils de mesure des perturbations radioélectriques et de l'immunité aux perturbations radioélectriques - Partie 2-3: Méthodes de mesure des perturbations et de l'immunité - Mesures des perturbations rayonnées

Specifikacija merilnih naprav in metod za merjenje radijskih motenj in odpornosti - 2-3. del: Metode za merjenje radijskih motenj in odpornosti - Merjenje sevanih motenj

Ta del standarda CISPR 16 določa načine merjenja radiofrekvenčnih motenj v frekvenčnem območju od 9 kHz do 18 GHz. Vidiki merilne negotovosti so določeni v standardih CISPR 16-4-1 in CISPR 16-4-2.
OPOMBA: V skladu z vodilom IEC 107 [13]1 je standard CISPR 16-2-3 osnovna objava o elektromagnetni združljivosti, ki jo uporabljajo tehnični odbori v okviru Mednarodne elektrotehniške komisije (IEC). Kot je navedeno v vodilu 107, so za ugotavljanje uporabe standarda o elektromagnetni združljivosti odgovorni tehnični odbori. Odbor CISPR in njegovi pododbori so pripravljeni sodelovati s tehničnimi odbori pri vrednotenju posameznih preskusov elektromagnetne združljivosti za ustrezne izdelke.

General Information

• Status: Published
• Publication Date: 27-Apr-2017
• ICS: 33.100.10 - Emission
• ICS: 33.100.20 - Immunity
• Technical Committee: CLC/TC 210 - Electromagnetic Compatibility (EMC)
• Drafting Committee: IEC/SC CISPR/A - Merjenje radijskih interferenc in statistične metode
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 28-Apr-2017
• Completion Date: 28-Apr-2017
• Directive: 2004/108/EC - Directive 2004/108/EC of the European Parliament and of the Council of 15 December 2004 on the approximation of the laws of the Member States relating to electromagnetic compatibility and repealing Directive 89/336/EEC
• Directive: 2004/108/EU - DIRECTIVE 2004/108/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 15 December 2004 on the approximation of the laws of the Member States relating to electromagnetic compatibility and repealing Directive 89/336/EEC
• Directive: 2014/30/EU - Directive 2014/30/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to electromagnetic compatibility (recast)
• Mandate: M/404 - Standardisation Mandate to CEN, CENELEC and ETSI for harmonized standard according to the Electro Magnetic Compatibility (EMC) Directive 2004/108/EC
• Ref Project: SIST EN 55016-2-3:2017 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements

Relations

• Replaces: EN 55016-2-3:2010/AC:2013 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements
• Effective Date: 26-Jan-2023
• Replaces: EN 55016-2-3:2010/A2:2014 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements
• Effective Date: 23-Jan-2023
• Replaces: EN 55016-2-3:2010/A1:2010 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements
• Effective Date: 02-May-2017
• Replaces: EN 55016-2-3:2010 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements
• Effective Date: 21-Apr-2015
• Amended By: EN 55016-2-3:2017/A2:2023 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements
• Effective Date: 17-Aug-2021
• Amended By: EN 55016-2-3:2017/A1:2019 - Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements
• Effective Date: 19-Jul-2016

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Specifikacija merilnih naprav in metod za merjenje radijskih motenj in odpornosti - 2-3. del: Metode za merjenje radijskih motenj in odpornosti - Merjenje sevanih motenjAnforderungen an Geräte und Einrichtungen sowie Festlegung der Verfahren zur Messung der hochfrequenten Störaussendung (Funkstörungen) und Störfestigkeit - Teil 2-3: Verfahren zur Messung der hochfrequenten Störaussendung (Funkstörungen) und Störfestigkeit - Messung der gestrahlten StöraussendungSpécifications des méthodes et des appareils de mesure des perturbations radioélectriques et de l'immunité aux perturbations radioélectriques - Partie 2-3: Méthodes de mesure des perturbations et de l'immunité - Mesures des perturbations rayonnéesSpecification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements33.100.20ImunostImmunity17.240Merjenje sevanjaRadiation measurementsICS:Ta slovenski standard je istoveten z:EN 55016-2-3:2017SIST EN 55016-2-3:2017en01-julij-2017SIST EN 55016-2-3:2017SLOVENSKI
STANDARDSIST EN 55016-2-3:2010/A2:2014SIST EN 55016-2-3:2010/AC:2013SIST EN 55016-2-3:2010SIST EN 55016-2-3:2010/A1:20101DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 55016-2-3
April 2017 ICS 33.100.10; 33.100.20
Supersedes
EN 55016-2-3:2010
English Version
Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements (CISPR 16-2-3:2016)
Spécifications des méthodes et des appareils de mesure des perturbations radioélectriques et de l'immunité aux perturbations radioélectriques - Partie 2-3: Méthodes de mesure des perturbations et de l'immunité - Mesures des perturbations rayonnées (CISPR 16-2-3:2016)
Anforderungen an Geräte und Einrichtungen sowie Festlegung der Verfahren zur Messung der hochfrequenten Störaussendung (Funkstörungen) und Störfestigkeit
- Teil 2-3: Verfahren zur Messung der hochfrequenten Störaussendung (Funkstörungen) und Störfestigkeit - Messung der gestrahlten Störaussendung (CISPR 16-2-3:2016) This European Standard was approved by CENELEC on 2016-10-20. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17,
B-1000 Brussels © 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 55016-2-3:2017 E SIST EN 55016-2-3:2017

The following dates are fixed: • latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2017-10-28 • latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2020-04-28
This document supersedes EN 55016-2-3:2010.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent rights.
Endorsement notice The text of the International Standard CISPR 16-2-3:2016 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated:
CISPR 11:2015 NOTE Harmonized as EN 55011:2016. CISPR 16-1-6:2014 NOTE Harmonized as EN 55016-1-6:2015. CISPR 22:2008 NOTE Harmonized as EN 55022:2010. IEC 61140:2016 NOTE Harmonized as EN 61140:2016. ISO/IEC Guide 2:2004 NOTE Harmonized as EN 45020:2006. ISO/IEC 17000:2004 NOTE Harmonized as EN ISO/IEC 17000:2004. IEC 61000-4-21 NOTE Harmonized as EN 61000-4-21.
Annex ZA (normative)
Normative references to international publications with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu.
Publication Year Title EN/HD Year IEC 60050-161 -
International Electrotechnical Vocabulary (IEV) -- Chapter 161: Electromagnetic compatibility - -
IEC 61000-4-3 2006
Electromagnetic compatibility (EMC) -- Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test EN 61000-4-3 2006
+ A1 2007
+ A1 2008
+ A2 2010
+ A2 2010
IEC 61000-4-20 -
Electromagnetic compatibility (EMC) -- Part 4-20: Testing and measurement techniques - Emission and immunity testing in transverse electromagnetic (TEM) waveguides EN 61000-4-20
CISPR 14-1 2016
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission FprEN 55014-1 2016 CISPR 16-1-1 -
Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring appartus - -
CISPR 16-1-2 2014
Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-2: Radio disturbance and immunity measuring apparatus - Coupling devices for conducted disturbance measurements EN 55016-1-2 2014
CISPR 16-1-4 2010
Specification for radio disturbance and immunity measuring apparatus and methods -- Part 1-4: Radio disturbance and immunity measuring apparatus - Antennas and test sites for radiated disturbance measurements EN 55016-1-4 2010
+ A1 2012
+ A1 2012
CISPR 16-2-1 2014
Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-1: Methods of measurement of disturbances and immunity - Conducted disturbance measurements EN 55016-2-1 2014
CISPR 16-4-2 -
Specification for radio disturbance and immunity measuring apparatus and methods -- Part 4-2: Uncertainties, statistics and limit modelling - Measurement instrumentation uncertainty EN 55016-4-2
Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-1: Uncertainties, statistics and limit modelling - Uncertainties in standardized EMC tests - -
CISPR TR 16-4-5 -
Specification for radio disturbance and immunity measuring apparatus and methods - Part 4-5: Uncertainties, statistics and limit modelling - Conditions for the use of alternative test methods - -
CISPR 16-2-3 Edition 4.0 2016-09 INTERNATIONAL STANDARD NORME INTERNATIONALE INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE
ICS 33.100.10; 33.100.20
ISBN 978-2-8322-3590-4
Part 2-3: Methods of measurement of disturbances and immunity – Radiated disturbance measurements
Spécifications des méthodes et des appareils de mesure des perturbations radioélectriques et de l’immunité aux perturbations radioélectriques –
Partie 2-3: Méthodes de mesure des perturbations et de l'immunité – Mesurages des perturbations rayonnées
INTERNATIONAL SPECIAL COMMITTEE ON RADIO INTERFERENCE COMITÉ INTERNATIONAL SPÉCIAL DES PERTURBATIONS RADIOÉLECTRIQUES
BASIC EMC PUBLICATION PUBLICATION FONDAMENTALE EN CEM
– 2 – CISPR 16-2-3:2016 © IEC 2016
CONTENTS FOREWORD. 7 1 Scope . 9 2 Normative references . 9 3 Terms, definitions and abbreviations . 10 3.1 Terms and definitions . 10 3.2 Abbreviated terms . 15 4 Types of disturbance to be measured . 16 4.1 General . 16 4.2 Types of disturbance . 16 4.3 Detector functions . 16 5 Connection of measuring equipment . 16 6 General measurement requirements and conditions. 17 6.1 General . 17 6.2 Disturbance not produced by the equipment under test . 17 6.2.1 General . 17 6.2.2 Compliance (conformity assessment) testing . 17 6.3 Measurement of continuous disturbance . 17 6.3.1 Narrowband continuous disturbance . 17 6.3.2 Broadband continuous disturbance . 17 6.3.3 Use of spectrum analyzers and scanning receivers . 17 6.4 EUT arrangement and measurement conditions . 18 6.4.1 General arrangement of the EUT . 18 6.4.2 Operation of the EUT . 20 6.4.3 EUT time of operation . 20 6.4.4 EUT running-in time . 21 6.4.5 EUT supply . 21 6.4.6 EUT mode of operation . 21 6.4.7 Operation of multifunction equipment . 21 6.4.8 Determination of arrangement(s) causing maximum emissions . 21 6.4.9 Recording of measurements . 21 6.5 Interpretation of measuring results . 22 6.5.1 Continuous disturbance . 22 6.5.2 Discontinuous disturbance . 22 6.5.3 Measurement of the duration of disturbance . 22 6.6 Measurement times and scan rates for continuous disturbance . 22 6.6.1 General . 22 6.6.2 Minimum measurement times . 23 6.6.3 Scan rates for scanning receivers and spectrum analyzers . 23 6.6.4 Scan times for stepping receivers . 24 6.6.5 Strategies for obtaining a spectrum overview using the peak detector . 25 6.6.6 Timing considerations using FFT-based instruments . 29 7 Measurement of radiated disturbances . 32 7.1 Introductory remarks . 32 7.2 Loop-antenna system measurements (9 kHz to 30 MHz) . 33 7.2.1 General . 33 7.2.2 General measurement method . 33 SIST EN 55016-2-3:2017

CISPR 16-2-3:2016 © IEC 2016 – 3 –
7.2.3 Test environment . 34 7.2.4 Configuration of the equipment under test . 35 7.2.5 Measurement uncertainty for LA
...