iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN 60700-1:2015/AC:2017-02

(Corrigendum)

Thyristor valves for high voltage direct current (HVDC) power transmission - Part 1: Electrical testing

Thyristor valves for high voltage direct current (HVDC) power transmission - Part 1: Electrical testing

IEC corrigendum

Thyristorventile für Hochspannungsgleichstrom-Energieübertragung (HGÜ) - Teil 1: Elektrische Prüfung

Valves à thyristors pour le transport d'énergie en courant continu à haute tension (CCHT) - Partie 1: Essais électriques

Tiristorski ventili (elektronke) za visokonapetostni enosmerni prenos (HVDC) električne energije - 1. del: Električno preskušanje (IEC 60700-1:2015/COR1:2017) - Popravek AC

General Information

Status
Published
Publication Date
09-Feb-2017
ICS
29.200 - Rectifiers. Convertors. Stabilized power supply
Technical Committee
CLC/TC 22X - Power electronics
Drafting Committee
CLC/TC 22X - Power electronics
Current Stage
6060 - Document made available - Publishing
Start Date
10-Feb-2017
Completion Date
10-Feb-2017
Ref Project
SIST EN 60700-1:2015/AC:2017 - Thyristor valves for high voltage direct current (HVDC) power transmission - Part 1: Electrical testing (IEC 60700-1:2015/COR1:2017)

Relations

Corrects
EN 60700-1:2015 - Thyristor valves for high voltage direct current (HVDC) power transmission - Part 1: Electrical testing
Effective Date
07-Feb-2017

Buy Standard

EN 60700-1:2015/AC:2017EN 60700-1:2015/AC:2017
PreviousNext
Corrigendum
EN 60700-1:2015/AC:2017
English and French language
4 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Thyristorventile für Hochspannungsgleichstrom-Energieübertragung (HGÜ) - Teil 1: Elektrische Prüfung (IEC 60700-1:2015/COR1:2017)Valves à thyristors pour le transport d'énergie en courant continu à haute tension (CCHT) - Partie 1: Essais électriques (IEC 60700-1:2015/COR1:2017)Thyristor valves for high voltage direct current (HVDC) power transmission - Part 1: Electrical testing (IEC 60700-1:2015/COR1:2017)31.080.20TiristorjiThyristors29.200QDSDMDQMHRectifiers. Convertors. Stabilized power supply19.080SUHVNXãDQMHElectrical and electronic testingICS:Ta slovenski standard je istoveten z:EN 60700-1:2015/AC:2017-02SIST EN 60700-1:2015/AC:2017en,fr01-april-2017SIST EN 60700-1:2015/AC:2017SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN 60700-1:2015/AC:2017-02
February 2017
ICS 29.200 English Version
Thyristor valves for high voltage direct current (HVDC) power transmission - Part 1: Electrical testing (IEC 60700-1:2015/COR1:2017)
Valves à thyristors pour le transport d'énergie en courant continu à haute tension (CCHT) - Partie 1: Essais électriques (IEC 60700-1:2015/COR1:2017)
Thyristorventile für Hochspannungsgleichstrom-Energieübertragung (HGÜ) - Teil 1: Elektrische Prüfung (IEC 60700-1:2015/COR1:2017) This corrigendum becomes effective on 10 February 2017 for incorporation in the English language version of the EN. European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17,
B-1000 Brussels © 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 60700-1:2015/AC:2017-02 ESIST EN 60700-1:2015/AC:2017

Endorsement notice
The text of the corrigendum IEC 60700-1:2015/COR1:2017
was approved by CENELEC as EN 60700-1:2015/AC:2017-02 without any modification.
IEC 60700-1:2015/COR1:2017 – 1 –
 IEC 2017 INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ÉLECTROTECHNIQUE INTERNATIONALE ____________
IEC 60700-1 Edition 2.0
2015-07
THYRISTOR VALVES FOR HIGH VOLTAGE DIRECT CURRENT (HVDC) POWER TRANSMISSION –
Part 1: Electrical testing IEC 60700-1 Édition 2.0
2015-07
VALVES À THYRISTORS POUR LE TRANSPORT D'ÉNERGIE EN COURANT CONTINU À HAUTE TENSION (CCHT) –
Partie 1
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN IEC 62501:2024(Main)
Voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) power transmission - Electrical testing
SIST EN IEC 62501:2024

IEC 62501:2024 applies to self-commutated converter valves, for use in a three-phase bridge voltage sourced converter (VSC) for high voltage DC power transmission or as part of a back-to-back link, and to dynamic braking valves. It is restricted to electrical type and production tests. This document can be used as a guide for testing of high-voltage VSC valves used in energy storage systems (ESS). The tests specified in this document are based on air insulated valves. The test requirements and acceptance criteria can be used for guidance to specify the electrical type and production tests of other types of valves. This edition includes the following significant technical changes with respect to the previous edition: a) Conditions for use of evidence in lieu are inserted as a new Table 1; b) Test parameters for valve support DC voltage test, 7.3.2, and MVU DC voltage test, 8.4.1, updated; c) AC-DC voltage test between valve terminals, Clause 9, is restructured and alternative tests, by individual AC and DC voltage tests, added in 9.4.2; d) Partial discharge test in routine test program is removed; e) More information on valve component fault tolerance, Annex B, is added; f) Valve losses determination is added as Annex C.

  • Standard
    57 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60146-1-1:2024(Main)
Semiconductor converters - General requirements and line commutated converters - Part 1-1: Specification of basic requirements
SIST EN IEC 60146-1-1:2024

IEC 60146-1-1:2024 specifies the requirements for the performance of all semiconductor power converters and semiconductor power switches using controllable and/or non-controllable electronic valve devices. It is primarily intended to specify the basic requirements for converters in general and the requirements applicable to line commutated converters for conversion of AC power to DC power or vice versa. Parts of this document are also applicable to other types of electronic power converter provided that they do not have their own product standards. This fifth edition introduces four main changes: a) re-edition of the whole standard according to the current directives; b) deletion of safety-related descriptions considering coordination with IEC 62477 series; c) changes of calculation methods of inductive voltage regulation; d) changes considering coordination with IEC 61378 series.

  • Standard
    92 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62477-1:2023/AC:2024-04(Corrigendum)
Safety requirements for power electronic converter systems and equipment - Part 1: General
SIST EN IEC 62477-1:2024/AC:2024
  • Corrigendum
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62040-1:2019/A1:2023(Amendment)
Uninterruptible power systems (UPS) - Part 1: Safety requirements
SIST EN IEC 62040-1:2019/A1:2024

No scope available

  • Amendment
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61800-5-1:2023(Main)
Adjustable speed electrical power drive systems - Part 5-1: Safety requirements - Electrical, thermal and energy
SIST EN IEC 61800-5-1:2024

IEC 61800-5-1:2022 specifies requirements for adjustable speed electrical power drive systems (PDS) or their elements, with respect to electrical, thermal, fire, mechanical, energy and other relevant hazards. It does not cover the driven equipment except for interface requirements. It applies to adjustable speed electrical PDS which include the power conversion, basic drive module (BDM)/complete drive module (CDM) control, and a motor or motors. Excluded are traction and electric vehicle BDM/CDM. It applies to low-voltage adjustable speed electrical PDS intended to feed a motor or motors from a BDM/CDM connected to phase-to-phase voltages of up to and including 1,0 kV AC (50 Hz or 60 Hz) and up to and including 1,5 kV DC. It also applies to high-voltage adjustable speed electrical PDS intended to feed a motor or motors from a BDM/CDM connected to phase-to-phase voltages of up to and including 35 kV AC (50 Hz or 60 Hz) and up to and including 52 kV DC. This document also applies to PDS which intentionally emits or receives radio waves for the purpose of radio communication. This edition includes the following significant technical changes with respect to the previous edition: a) harmonization with IEC 62477-1:2022; b) harmonization with UL 61800-5-1 and CSA C22.2 No. 274, including an annex with a list of national deviation which was considered not possible to harmonize within a reasonable timeframe; c) more detailed information about the evaluation of components according to this document and relevant safety component standards; d) updated requirement for mechanical hazards including multiple IP ratings.

  • Standard
    446 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61800-3:2023(Main)
Adjustable speed electrical power drive systems - Part 3: EMC requirements and specific test methods for PDS and machine tools
SIST EN IEC 61800-3:2024

IEC 61800-3:2022 specifies electromagnetic compatibility (EMC) requirements for adjustable speed power drive systems (PDSs) and machine tools (MTs). A PDS is an AC or DC motor drive including an electronic converter. Requirements are stated for AC and DC PDSs and MTs with input and/or output voltages (line-to-line voltage), up to 35 kV AC RMS. This document applies to equipment of all power ratings. As a product EMC standard, this document can be used for the assessment of PDS and MT. It can also be used for the assessment of complete drive modules (CDM) or basic drive modules (BDM). Traction applications and electric vehicles are excluded. Equipment which is defined as group 2 in CISPR 11:2015 is excluded. This document does not give requirements for the electrical machine which converts power between the electrical and mechanical forms within the PDS. Requirements for rotating electrical machines are covered by the IEC 60034 series. In this document, the term "motor" is used to describe the electrical machine, whether rotary or linear, and regardless of the direction of power flow. This document is applicable to BDMs, CDMs, PDSs and MTs with or without radio function. However, this document does not specify any radio transmission and reception requirements. This document defines the minimum requirements for emission and immunity in the frequency range from 0 Hz to 400 GHz. Tests are not required in frequency ranges where no requirements are specified. This fourth edition cancels and replaces the third edition published in 2017. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
extension of the scope to machine tools with one or more embedded PDS;
extension of the frequency range for radiated immunity tests to 6 GHz;
general updates in the normative part and the informative annexes.

  • Standard
    133 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61800-5-3:2023(Main)
Adjustable speed electrical power drive systems - Part 5-3: Safety requirements - Functional, electrical and environmental requirements for encoders
SIST EN IEC 61800-5-3:2024

IEC 61800-5-3:2021, which is a product standard, specifies requirements and makes recommendations for the design and development, integration and validation of safety-related encoder (Encoder(SR)) in terms of their functional safety considerations, electrical safety and environmental conditions. It applies to Encoder(SR), being sensors as part of a PDS(SR). This document can also be referred to and used for Encoder(SR) in any other safety-related application, for example safety-related position monitoring. This document is applicable where functional safety of an encoder is claimed and the Encoder(SR) is operating mainly in the high demand or continuous mode. The requirements of IEC 61800-5-2:2016 for PDS(SR) apply to Encoder(SR) as applicable. This document includes additional or different requirements for Encoder(SR). It sets out safety-related considerations of Encoder(SR) in terms of the framework of IEC 61508 (all parts), and introduces requirements for Encoder(SR) as subsystems of a safety-related system. It is intended to facilitate the realisation of the electrical/electronic/programmable electronic (E/E/PE) and mechanical parts of an Encoder(SR) in relation to the safety performance of safety sub-function(s) of an Encoder(SR).

  • Standard
    108 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62477-1:2023(Main)
Safety requirements for power electronic converter systems and equipment - Part 1: General
SIST EN IEC 62477-1:2024

IEC 62477-1:2022 applies to power electronic converter systems (PECS), any specified accessories, and their components for electronic power conversion and electronic power switching, including the means for their control, protection, monitoring and measurement, such as with the main purpose of converting electric power, with rated system voltages not exceeding 1 000 V AC or 1 500 V DC. This document also applies to PECS which intentionally emit or receive radio waves for the purpose of radio communication. This document can also be used as a reference standard for product committees producing product standards for: - adjustable speed electric power drive systems (PDS); - standalone uninterruptible power systems (UPS); - low voltage - stabilized DC power supplies; - bidirectional power converters. For PECS and their specified accessories for which no product standard exists, this document provides minimum requirements for safety aspects. This document has the status of a group safety publication in accordance with IEC Guide 104 for power electronic converter systems for solar, wind, tidal, wave, fuel cell or similar energy sources. According to IEC Guide 104, one of the responsibilities of technical committees is, wherever applicable, to make use of basic safety publications and/or group safety publications in the preparation of their product standards. Guidance for use of this group safety publication for product committees is given in Annex S. This document - establishes a common terminology for safety aspects relating to PECS, - establishes minimum requirements for the coordination of safety aspects of interrelated parts within a PECS, - establishes a common basis for minimum safety requirements for the PECS portion of products that contain PECS, - specifies requirements to reduce risks of fire, electric shock, thermal, energy and mechanical hazards, during use and operation and, where specifically stated, during service and maintenance, and - specifies minimum requirements to reduce risks with respect to PECS designed as pluggable and permanently connected equipment, whether it consists of a system of interconnected units or independent units, subject to installing, operating and maintaining the PECS in the manner prescribed by the manufacturer. This document does not cover - telecommunications apparatus other than power supplies to such apparatus, - functional safety aspects as covered by, for example, IEC 61508 (all parts), and - electrical equipment and systems for railways applications and electr

  • Standard
    257 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    257 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 62751-2:2014/A2:2023(Amendment)
Power losses in voltage sourced converter (VSC) valves for high-voltage direct current (HVDC) systems - Part 2: Modular multilevel converters
SIST EN 62751-2:2014/A2:2024
  • Amendment
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 62927:2017/A1:2023(Amendment)
Voltage sourced converter (VSC) valves for static synchronous compensator (STATCOM) - Electrical testing
SIST EN 62927:2018/A1:2023
  • Amendment
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day