iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN 60384-1:2016

(Main)

Fixed capacitors for use in electronic equipment - Part 1: Generic specification

Fixed capacitors for use in electronic equipment - Part 1: Generic specification

IEC 60384-1:2016 is available as IEC 60384-1:2016 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition. IEC 60384-1:2016 is a generic specification and is applicable to fixed capacitors for use in electronic equipment. It establishes standard terms, inspection procedures and methods of test for use in sectional and detail specifications of electronic components for quality assessment or any other purpose. This edition contains the following significant technical changes with respect to the previous edition: - INTRODUCTION added; - 4.41 Whisker growth test added; - Annex Q completely restructured.

Festkondensatoren zur Verwendung in Geräten der Elektronik - Teil 1: Fachgrundspezifikation

Condensateurs fixes utilisés dans les équipements électroniques - Partie 1: Spécification générique

L'IEC 60384-1:2016 est une spécification générique qui s'applique aux condensateurs fixes utilisés dans les équipements électroniques. Elle établit des définitions, des procédures de contrôle et des méthodes d'essai normalisées à utiliser dans les spécifications intermédiaires et particulières des composants électroniques, pour les systèmes d'assurance de la qualité ou pour tout autre usage. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente: - INTRODUCTION ajoutée; - 4.41 Essai sur le développement des trichites ajouté; - Annexe Q entièrement restructurée.

Nespremenljivi kondenzatorji za elektronsko opremo - 1. del: Rodovna specifikacija (IEC 60384-1:2016)

Ta del standarda EN 60384 je splošna specifikacija in se uporablja za nespremenljive kondenzatorje za uporabo v elektronski opremi.
Določa splošne pogoje, inšpekcijske postopke in preskusne metode za uporabo v sekcijskih in podrobnih specifikacijah elektronskih komponent za oceno kakovosti ali kateri koli drug namen.

General Information

Status
Withdrawn
Publication Date
29-Sep-2016
Withdrawal Date
29-Sep-2019
ICS
31.060 - Capacitors
Technical Committee
CLC/TC 40XA - CLC/TC 40XA
Drafting Committee
IEC/TC 40 - IEC_TC_40
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
20-Aug-2024
Completion Date
20-Aug-2024
Ref Project
SIST EN 60384-1:2016 - Fixed capacitors for use in electronic equipment - Part 1: Generic specification (IEC 60384-1:2016)

Relations

Replaces
EN 60384-1:2009 - Fixed capacitors for use in electronic equipment - Part 1: Generic specification
Effective Date
04-Oct-2016
Replaced By
EN IEC 60384-1:2021 - Fixed capacitors for use in electronic equipment - Part 1: Generic specification
Effective Date
28-May-2019

Buy Standard

EN 60384-1:2016EN 60384-1:2016
PreviousNext
Standard
EN 60384-1:2016
English language
89 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Nespremenljivi kondenzatorji za elektronsko opremo - 1. del: Rodovna specifikacija (IEC 60384-1:2016)Condensateurs fixes utilisés dans les équipements électroniques - Partie 1: Spécification générique (IEC 60384-1:2016)Fixed capacitors for use in electronic equipment - Part 1: Generic specification (IEC 60384-1:2016)31.060.10Fiksni kondenzatorjiFixed capacitorsICS:Ta slovenski standard je istoveten z:EN 60384-1:2016SIST EN 60384-1:2016en01-december-2016SIST EN 60384-1:2016SLOVENSKI
STANDARDSIST EN 60384-1:20101DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 60384-1
September 2016 ICS 31.060
Supersedes
EN 60384-1:2009
English Version
Fixed capacitors for use in electronic equipment - Part 1: Generic specification (IEC 60384-1:2016)
Condensateurs fixes utilisés dans les équipements électroniques - Partie 1: Spécification générique (IEC 60384-1:2016)
Festkondensatoren zur Verwendung in Geräten der Elektronik - Teil 1: Fachgrundspezifikation (IEC 60384-1:2016) This European Standard was approved by CENELEC on 2016-03-18. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17,
B-1000 Brussels © 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 60384-1:2016 E SIST EN 60384-1:2016

This document supersedes EN 60384-1:2009. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 60384-1:2016 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60384-2 NOTE Harmonized as EN 60384-2. IEC 60384-3 NOTE Harmonized as EN 60384-3. IEC 60384-3-1 NOTE Harmonized as EN 60384-3-1. IEC 60384-26 NOTE Harmonized as EN 60384-26. IEC 60469:2013 NOTE Harmonized as EN 60469:2013. ISO 9000 NOTE Harmonized as EN ISO 9000.
Annex ZA (normative)
Normative references to international publications with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu.
Publication Year Title EN/HD Year IEC 60027 series
Letter symbols to be used in electrical technology EN 60027 series
IEC 60050 series
International Electrotechnical Vocabulary - series
IEC 60062 -
Marking codes for resistors and capacitors EN 60062 -
IEC 60063 -
Preferred number series for resistors and capacitors EN 60063 -
IEC 60068-1 2013
Environmental testing -- Part 1: General and guidance EN 60068-1 2014
IEC 60068-2-1 2007
Environmental testing -- Part 2-1: Tests - Test A: Cold EN 60068-2-1 2007
IEC 60068-2-2 2007
Environmental testing -- Part 2-2: Tests - Test B: Dry heat EN 60068-2-2 2007
IEC 60068-2-6 2007
Environmental testing -- Part 2-6: Tests - Test Fc: Vibration (sinusoidal) EN 60068-2-6 2008
IEC 60068-2-13 1983
Basic environmental testing procedures - Part 2-13: Tests - Test M: Low air pressure EN 60068-2-13 1999
IEC 60068-2-14 2009
Environmental testing -- Part 2-14: Tests - Test N: Change of temperature EN 60068-2-14 2009
IEC 60068-2-17 1994
Basic environmental testing procedures - Part 2-17: Tests - Test Q: Sealing EN 60068-2-17 1994
IEC 60068-2-20 2008
Environmental testing -- Part 2-20: Tests - Test T: Test methods for solderability and resistance to soldering heat of devices with leads EN 60068-2-20 2008
IEC 60068-2-21 2006
Environmental testing -- Part 2-21: Tests - Test U: Robustness of terminations and integral mounting devices EN 60068-2-21 2006
IEC 60068-2-27 2008
Environmental testing -- Part 2-27: Tests - Test Ea and guidance: Shock EN 60068-2-27 2009
IEC 60068-2-30 2005
Environmental testing -- Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle) EN 60068-2-30 2005
IEC 60068-2-45 AMD 1 1993
Basic environmental testing procedures; part_2: tests; test_XA and guidance: immersion in cleaning solvents; amendment_1 - -
IEC 60068-2-45 1980
Basic environmental testing procedures - Part 2-45: Tests - Test XA and guidance: Immersion in cleaning solvents EN 60068-2-45 1992
Environmental testing - Part 2-54: Tests - Test Ta: Solderability testing
of electronic components by the wetting balance method EN 60068-2-54 2006
IEC 60068-2-58 2015
Environmental testing - Part 2-58: Tests - Test Td: Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD) EN 60068-2-58 2015
IEC 60068-2-67 1995
Environmental testing -- Part 2: Tests - Test Cy: Damp heat, steady state, accelerated test primarily intended for components EN 60068-2-67 1996
IEC 60068-2-69 2007
Environmental testing - Part 2: Tests - Test Te: Solderability testing of electronic components for surface mounting devices (SMD) by the wetting balance method EN 60068-2-69 2007
IEC 60068-2-78 2012
Environmental testing -- Part 2-78: Tests - Test Cab: Damp heat, steady state EN 60068-2-78 2013
IEC 60068-2-82 2007
Environmental testing -- Part 2-82: Tests - Test XW1: Whisker test methods for electronic and electric components EN 60068-2-82 2007
IEC 60294 -
Measurement of the dimensions of a cylindrical component with axial terminations EN 60294 -
IEC 60617 -
Standard data element types with associated classification scheme for electric components -- Part 4: IEC reference collection for standard data element types and component classes - -
IEC 60695-11-5 2004
Fire hazard testing -- Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance EN 60695-11-5 2005
IEC 60717 -
Method for the determination of the space required by capacitors and resistors with unidirectional terminations EN 60717 -
IEC 61193-2 -
Quality assessment systems -- Part 2: Selection and use of sampling plans for inspection of electronic components and packages EN 61193-2 -
IEC 61249-2-7 2002
Materials for printed boards and other interconnecting structures -- Part 2-7: Reinforced base materials, clad and unclad - Epoxide woven E-glass laminated sheet of defined flammability (vertical burning test), copper-clad EN 61249-2-7 2002
- -
+ corrigendum Sep. 2005
ISO 3 -
Preferred numbers; Series of preferred numbers - -
ISO 80000-1 -
Quantities and units -- Part 1: General EN ISO 80000-1 -
IEC 60384-1 Edition 5.0 2016-02 INTERNATIONAL STANDARD NORME INTERNATIONALE Fixed capacitors for use in electronic equipment –
Part 1: Generic specification
Condensateurs fixes utilisés dans les équipements électroniques –
Partie 1: Spécification générique
INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE
ICS 31.060
ISBN 978-2-8322-3153-1
– 2 – IEC 60384-1:2016  IEC 2016 CONTENTS FOREWORD . 9 INTRODUCTION . 11 1 General . 13 1.1 Scope . 13 1.2 Normative references . 13 2 Technical data . 15 2.1 Symbols, units and abbreviated terms . 15 2.1.1 General . 15 2.1.2 Letter symbols . 15 2.1.3 Abbreviations . 16 2.2 Terms and definitions . 16 2.3 Preferred values and additional technical requirements . 21 2.3.1 General . 21 2.3.2 Preferred values of nominal capacitance . 21 2.3.3 Preferred values of rated voltage . 21 2.3.4 Rated a.c. load . 21 2.3.5 Rated pulse load . 22 2.3.6 Temperature derated voltage . 22 2.4 Marking . 23 2.4.1 General . 23 2.4.2 Coding . 23 3 Quality assessment procedures . 23 4 Tests and measurement procedures . 24 4.1 General . 25 4.2 Standard atmospheric conditions . 25 4.2.1 Standard atmospheric conditions for testing . 25 4.2.2 Recovery conditions . 25 4.2.3 Referee conditions . 26 4.2.4 Reference conditions . 26 4.3 Drying . 26 4.4 Visual examination and check of dimensions . 26 4.4.1 Visual examination . 26 4.4.2 Dimensions (gauging) . 26 4.4.3 Dimensions (detail) . 26 4.5 Insulation resistance . 27 4.5.1 Preconditioning . 27 4.5.2 Measuring conditions . 27 4.5.3 Test points . 27 4.5.4 Test methods . 27 4.5.5 Temperature compensation . 28 4.5.6 Conditions to be prescribed in the relevant specification . 28 4.6 Voltage proof . 29 4.6.1 General . 29 4.6.2 Test circuit (for the test between terminations) . 29 4.6.3 Test .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN IEC 60384-1:2021(Main)
Fixed capacitors for use in electronic equipment - Part 1: Generic specification
SIST EN IEC 60384-1:2021

This part of IEC 60384 is a generic specification and is applicable to fixed capacitors for use in electronic equipment. It establishes standard terms, inspection procedures and methods of test for use in sectional and detail specifications of electronic components for quality assessment or any other purpose.

  • Standard
    84 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60301:2012(Main)
Preferred diameters of wire terminations of capacitors and resistors
SIST EN 60301:2012

IEC 60301:2012 gives a series of preferred diameters of the finished wire terminations of capacitors and resistors for use in electronic equipment. This third edition cancels and replaces the second edition, published in 1971, and its Amendment 1, published in 1972, and constitutes a technical revision. The main technical changes with respect to the second edition are the following: - employment of SI units only in the normative part of this standard, causing transfer of all imperial dimensions from Table 1 to the informative Annex A, - addition of two smaller diameters of wire terminations in Table 1, and - tightening of the tolerance ranges defined by minimum and maximum diameters in Table 1.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 62146-2:2023(Main)
Capacitors for high‑voltage alternating current circuit‑breakers - Part 2: TRV capacitors
SIST EN IEC 62146-2:2023

IEC 62146-2:2023 is applicable to TRV capacitors used on high-voltage alternating current circuit-breakers with rated voltages above 100 kV with 50 Hz or 60 Hz. TRV capacitors are installed phase to earth, either in parallel to the bushing on dead tank circuit-breakers, or immersed inside the circuit-breaker, or freestanding close to the circuit-breaker. Their function is to limit the transient recovery voltage (TRV) and the rate of rise of recovery voltage (RRRV) on the circuit-breaker. Capacitors in compliance with this document can be used as TRV capacitor. This document applies to TRV capacitors falling into one or both of the following categories for: - mounting on or close to air insulated switchgear (AIS) dead tank and live tank circuit-breakers, or - mounting on gas insulated switchgear (GIS) circuit-breakers. The testing for each of the above applications is in some cases different. This document does not apply to grading capacitors installed in parallel to the chambers of the circuit-breaker, which are specified in IEC 62146-1. This document does not apply to capacitors not directly associated with high-voltage alternating current circuit-breakers. The object of this document is: - to define uniform rules regarding performances, testing and rating - to define specific safety rules - to provide a guidance for installation and operation The TRV capacitor is a sub-component for the circuit-breaker and is specified in accordance with the circuit-breaker specifications according to IEC 62271-1, IEC 62271-100, and if applicable to IEC 62271-203. TRV capacitors are commonly built with composite or ceramic housings (insulators). Those insulators follow IEC 61462 or IEC 62155. Other housings can be used if they can sustain applicable type tests according to IEC 61462 and IEC 62155. This International Standard is to be used in conjunction with IEC 62146-1:2013 and IEC 62146-1:2013/AMD1:2016.

  • Standard
    24 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60384-1:2021(Main)
Fixed capacitors for use in electronic equipment - Part 1: Generic specification
SIST EN IEC 60384-1:2021

This part of IEC 60384 is a generic specification and is applicable to fixed capacitors for use in electronic equipment. It establishes standard terms, inspection procedures and methods of test for use in sectional and detail specifications of electronic components for quality assessment or any other purpose.

  • Standard
    84 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60063:2015(Main)
Preferred number series for resistors and capacitors
SIST EN 60063:2015

IEC 60063:2015 provides series of preferred values for the resistance of resistors and for the capacitance of capacitors. The definition of such series with a defined numeric resolution is a basic prerequisite for the marking and coding of capacitors and resistors with their respective capacitance or resistance values as described in IEC 60062. This edition includes the following significant technical changes with respect to the previous edition: - revision of the information on a relationship between an E Series and the tolerance of a resistance or capacitance value of a respective component; - introduction of advice on a possible deduction from the marking of a component to an associated E Series and also to an associated tolerance; - complete editorial revision.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60301:2012(Main)
Preferred diameters of wire terminations of capacitors and resistors
SIST EN 60301:2012

IEC 60301:2012 gives a series of preferred diameters of the finished wire terminations of capacitors and resistors for use in electronic equipment. This third edition cancels and replaces the second edition, published in 1971, and its Amendment 1, published in 1972, and constitutes a technical revision. The main technical changes with respect to the second edition are the following: - employment of SI units only in the normative part of this standard, causing transfer of all imperial dimensions from Table 1 to the informative Annex A, - addition of two smaller diameters of wire terminations in Table 1, and - tightening of the tolerance ranges defined by minimum and maximum diameters in Table 1.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60717:2012(Main)
Method for the determination of the space required by capacitors and resistors with unidirectional terminations
SIST EN 60717:2012

IEC 60717:2012 applies to capacitors and resistors with unidirectional wire terminations intended for use in electronic equipment. This standard provides a method for determination of the space required by capacitors and resistors with unidirectional wire terminations. NOTE: Instead of measuring the actual space, it may be sufficient to ensure that a component fits into the maximum space for which it is designed. This may be achieved by means of fixed gauges. The main technical changes with respect to the first edition are the following: - employment of the millimetre-based grid, the preferred grid system given in IEC 60097, - employment of SI units only, causing deletion of the imperial dimensions from Table 1, - reduction of the tolerance on the chamfer depth in Figure 1, and - introduction of requirements on information to be given in a relevant specification.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 60915:2007(Main)
Capacitors and resistors for use in electronic equipment - Preferred dimensions of shaft ends, bushes and for the mounting of single-hole, bush-mounted, shaft-operated electronic components
SIST EN 60915:2008

IEC 60915:2006 contains preferred dimensions for shaft ends and bushes and for the mounting of single-hole, bush-mounted, shaft-operated variable capacitors, variable resistors and potentiometers. If other dimensions not listed in this standard have to be used, it is recommended to select them also from IEC 60390 and IEC 60620. This second edition cancels and replaces the first edition published in 1987 and constitutes a minor revision, related to tables, figures and references. This bilingual version, published in 2008-07, corresponds to the English version. The contents of the corrigendum of December 2008 have been included in this copy.

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 61270-1:1996(Main)
Capacitors for microwave ovens - Part 1: General
SIST EN 61270-1:1999

Applies to capacitors for microwave ovens operating at rated a.c. voltages of up to 3 000 V and a superimposed d.c. voltage of up to 1.13 times the value of rated a.c. voltage. Relates specifically to capacitors with a metal case and an upper rated maximum temperature of up to 100 °C, non-self-healing, with metal foil electrodes and dielectrics of paper and/or plastic, impregnated with a suitable oil. This part contains uniform rules regarding performance, testing and rating and specific safety rules.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60335-2-39:2024(Main)
Household and similar electrical appliances - Safety - Part 2-39: Particular requirements for commercial electric multi-purpose cooking pans
kSIST FprEN 60335-2-39:2012

IEC 60335-2-39:2012 deals with the safety of electrically operated commercial multi-purpose cooking pans not intended for household and similar use, their rated voltage being not more than 250 V for single-phase appliances connected between one phase and neutral and 480 V for other appliances. This standard also deals with pressurized appliances and appliances with pressurized parts. These appliances are used for processing food for commercial consumption, for example in kitchens of restaurants, canteens, hospitals and in commercial enterprises such as bakeries, butcheries, etc. The electrical part of appliances making use of other forms of energy is also within the scope of this standard. As far as is practicable, this standard deals with the common hazards presented by these types of appliances. Attention is drawn to the fact that for appliances intended to be used in vehicles or on board ships or aircraft, additional requirements may be necessary. The principal changes in this edition as compared with the fifth edition of IEC 60335-2-39 are as follows (minor changes are not listed): - addition to definition of portable appliances, atmospheric multi-purpose cooking and rated pressure; - deletion of equipotential symbol 5021 of IEC 60417 covered by Part 1; - addition of instructions for multi-purpose cooking pans; - modification on leakage current permissible for portable class l appliances; - addition to abnormal test requirements; - addition to mechanical hazard test for multi-purpose cooking pans; - addition of construction test for multi-purpose cooking pans; - addition to construction requirements for lids and theirs grips; - addition to construction requirements for positioning of pressure reliefs; - addition to construction's fixed appliances which are moved forward and backward for cleaning purposes.
The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations may need a transitional period following publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests. It is the recommendation of the committee that the content of this publication be adopted for implementation nationally not earlier than 12 months or later than 36 months from the date of publication. Keywords: Multi-purpose cooking pans.

  • Draft
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day