EN 61158-6-9:2014
(Main)Industrial communication networks - Fieldbus specifications - Part 6-9: Application layer protocol specification - Type 9 elements
Industrial communication networks - Fieldbus specifications - Part 6-9: Application layer protocol specification - Type 9 elements
IEC 61158-6-9:2014 defines the protocol provided to define the wire-representation of the service primitives defined in IEC 61158-5-9, and define the externally visible behavior associated with their transfer. This standard specifies the protocol of the Type 9 fieldbus application layer, in conformance with the OSI Basic Reference Model (ISO/IEC 7498-1) and the OSI application layer structure (ISO/IEC 9545). This third edition cancels and replaces the second edition published in 2010 and constitutes a technical revision. The main changes are: - Correct Time-difference valid range; - Correct Table 3 state transition; - Include Transparent timeliness class in BNU AREP formal model.
Industrielle Kommunikationsnetze - Feldbusse - Teil 6-9: Protokollspezifikation des Application Layer (Anwendungsschicht) - Typ 9-Elemente
Réseaux de communication industriels - Spécifications des bus de terrain - Partie 6-9: Spécification du protocole de la couche application - Éléments de type 9
L'IEC 61158-6-9:2014 décrit le protocole mis en place pour définir la représentation filaire des primitives de service définies dans la CEI 61158-5-9 et définir le comportement visible de l'extérieur associé à leur transfert. La présente norme spécifie le protocole de la couche application de bus de terrain de Type 9, en conformité avec le modèle de référence de base OSI (ISO/CEI 7498-1) et la structure de la couche application OSI (ISO/CEI 9545). Cette troisième édition annule et remplace la deuxième édition parue en 2010. Elle constitue une révision technique. Les principales modifications sont: - Correction de la plage valide de Time-difference (écart du temps); - Correction des Passages d'états du Tableau 3; - Inclusion de la classe de ponctualité "Transparent" dans le modèle formel des points AREP BNU.
Industrijska komunikacijska omrežja - Specifikacije za procesna vodila - 6-9. del: Specifikacija protokola na aplikacijski ravni - Elementi tipa 9 (IEC 61158-6-9:2014)
Aplikacijski nivo procesnih vodil (FAL) omogoča uporabniškim programom dostop do komunikacijskega okolja procesnih vodil. Glede na to je mogoče aplikacijski nivo procesnih vodil obravnavati kot »okno med ustreznimi aplikacijami«.
Ta standard določa skupne elemente za osnovne časovno kritične in časovno nekritične sporočilne komunikacije med aplikacijami v avtomatizacijskem okolju in material, specifičen za procesna vodila tipa 9. Izraz »časovno kritičen« se uporablja za predstavitev prisotnosti časovnega okna, v okviru katerega se zahteva dokončanje enega ali več opredeljenih dejanj z določeno stopnjo gotovosti. Zaradi neuspešnega dokončanja opredeljenih dejanj v časovnem oknu je možna odpoved aplikacij, ki zahtevajo dejanja, pri čemer so ogroženi oprema, obrat in morda človeška življenja.
Ta standard na abstrakten način določa na zunaj vidno vedenje, ki ga zagotavlja aplikacijski nivo procesnih vodil tipa 9 v smislu
a) abstraktne sintakse, ki določa podatkovne enote protokola aplikacijskega nivoja, ki se prenašajo med aplikacijskimi osebki, ki komunicirajo,
a) prenosne sintakse, ki določa podatkovne enote protokola aplikacijskega nivoja, ki se prenašajo med aplikacijskimi osebki, ki komunicirajo,
c) stroja stanja aplikacijskega konteksta, ki opredeljuje vedenje aplikacijskega opravila, vidnega med aplikacijskimi osebki, ki komunicirajo, in
d) strojev stanja aplikacijskega razmerja, ki opredeljujejo komunikacijsko vedenje med aplikacijskimi osebki, ki komunicirajo.
Namen tega standarda je opredeliti protokol, ki se zagotavlja za
1) določitev žične predstavitve primitivov opravil iz standarda IEC 61158-5-9 in
2) določitev zunanje vidnega vedenja, povezanega z njihovim prenosom.
Ta standard določa protokol aplikacijskega nivoja procesnih vodil IEC tipa 9 v skladu z osnovnim referenčnim modelom OSI (ISO/IEC 7498-1) in strukturo aplikacijskega nivoja OSI (ISO/IEC 9545).
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-marec-2015
1DGRPHãþD
SIST EN 61158-6-9:2012
Industrijska komunikacijska omrežja - Specifikacije za procesna vodila - 6-9. del:
Specifikacija protokola na aplikacijski ravni - Elementi tipa 9 (IEC 61158-6-9:2014)
Industrial communication networks - Fieldbus specifications - Part 6-9: Application layer
protocol specification - Type 9 elements (IEC 61158-6-9:2014)
Industrielle Kommunikationsnetze - Feldbusse - Teil 6-9: Protokollspezifikation des
Application Layer (Anwendungsschicht) - Typ 9-Elemente (IEC 61158-6-9:2014)
Réseaux de communication industriels - Spécifications des bus de terrain - Partie 6-9:
Spécification du protocole de la couche application - Éléments de type 9 (CEI 61158-6-
9:2014)
Ta slovenski standard je istoveten z: EN 61158-6-9:2014
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.100.70 Uporabniški sloj Application layer
35.110 Omreževanje Networking
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN 61158-6-9
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2014
ICS 25.040.40; 35.100.70; 35.110 Supersedes EN 61158-6-9:2012
English Version
Industrial communication networks - Fieldbus specifications -
Part 6-9: Application layer protocol specification - Type 9
elements
(IEC 61158-6-9:2014)
Réseaux de communication industriels - Spécifications des Industrielle Kommunikationsnetze - Feldbusse - Teil 6-9:
bus de terrain - Partie 6-9: Spécification du protocole de la Protokollspezifikation des Application Layer
couche application - Éléments de type 9 (Anwendungsschicht) - Typ 9-Elemente
(CEI 61158-6-9:2014) (IEC 61158-6-9:2014)
This European Standard was approved by CENELEC on 2014-09-23. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 61158-6-9:2014 E
Foreword
The text of document 65C/764/FDIS, future edition 3 of IEC 61158-6-9, prepared by SC 65C
"Industrial networks" of IEC/TC 65 "Industrial-process measurement, control and automation" was
submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61158-6-9:2014.
The following dates are fixed:
(dop) 2015-06-23
• latest date by which the document has to be implemented at
national level by publication of an identical national
standard or by endorsement
(dow) 2017-09-23
• latest date by which the national standards conflicting with
the document have to be withdrawn
This document supersedes EN 61158-6-9:2012.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
This document has been prepared under a mandate given to CENELEC by the European Commission
and the European Free Trade Association.
Endorsement notice
The text of the International Standard IEC 61158-6-9:2014 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 61784-1 NOTE Harmonized as EN 61784-1.
IEC 61784-2 NOTE Harmonized as EN 61784-2.
- 3 - EN 61158-6-9:2014
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod),
the relevant EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is
available here: www.cenelec.eu.
Publication Year Title EN/HD Year
IEC 61158-1 - Industrial communication networks - EN 61158-1 -
Fieldbus specifications -
Part 1: Overview and guidance for the
IEC 61158 and IEC 61784 series
IEC 61158-3-1 - Industrial communication networks - EN 61158-3-1 -
Fieldbus specifications -
Part 3-1: Data-link layer service definition -
Type 1 elements
IEC 61158-4-1 - Industrial communication networks - EN 61158-4-1 -
Fieldbus specifications -
Part 4-1: Data-link layer protocol
specification - Type 1 elements
IEC 61158-5-5 - Industrial communication networks - EN 61158-5-5 -
Fieldbus specifications -
Part 5-5: Application layer service
definition - Type 5 elements
IEC 61158-5-9 - Industrial communication networks - EN 61158-5-9 -
Fieldbus specifications -
Part 5-9: Application layer service
definition - Type 9 elements
ISO/IEC 646 - Information technology - ISO 7-bit coded - -
character set for information interchange
ISO/IEC 7498-1 - Information technology - Open Systems - -
Interconnection - Basic Reference Model:
The Basic Model
ISO/IEC 8824-1 - Information technology - Abstract Syntax - -
Notation One (ASN.1): Specification of
basic notation
Publication Year Title EN/HD Year
ISO/IEC 8825-1 - Information technology - ASN.1 encoding - -
rules: Specification of Basic Encoding
Rules (BER), Canonical Encoding Rules
(CER) and Distinguished Encoding Rules
(DER)
ISO/IEC 9545 - Information technology - Open Systems - -
Interconnection - Application Layer
structure
ISO/IEC 10731 - Information technology - Open Systems - -
Interconnection - Basic Reference Model -
Conventions for the definition of OSI
services
ISO/IEC/IEEE 60559 - Information technology - Microprocessor - -
Systems - Floating-Point arithmetic
IEC 61158-6-9 ®
Edition 3.0 2014-08
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Industrial communication networks – Fieldbus specifications –
Part 6-9: Application layer protocol specification – Type 9 elements
Réseaux de communication industriels – Spécifications des bus de terrain –
Partie 6-9: Spécification du protocole de la couche application – Eléments
de type 9
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX XD
ICS 25.040.40; 35.100.70; 35.110 ISBN 978-2-8322-1760-3
– 2 – IEC 61158-6-9:2014 © IEC 2014
CONTENTS
FOREWORD . 5
INTRODUCTION . 7
1 Scope . 8
1.1 General . 8
1.2 Specifications . 8
1.3 Conformance . 9
2 Normative references . 9
3 Terms, definitions, symbols, abbreviations and conventions . 10
3.1 Terms and definitions from other ISO/IEC standards . 10
3.2 IEC 61158-1 terms . 11
3.3 Abbreviations and symbols . 14
3.4 Conventions . 15
3.5 Conventions used in state machines . 16
4 Abstract syntax . 17
4.1 FAL-AR PDU abstract syntax . 17
4.2 Abstract syntax of PDUBody . 19
4.3 Type definitions for ASEs . 22
4.4 Abstract syntax of data types . 27
5 Transfer syntax . 28
6 Structure of FAL protocol state machines . 39
7 AP-Context state machines . 40
7.1 VCR PM structure . 40
7.2 VCR PM state machine . 41
8 FAL service protocol machine (FSPM) . 53
8.1 General . 53
8.2 FSPM state tables . 53
8.3 Functions used by FSPM . 56
8.4 Parameters of FSPM/ARPM primitives . 56
9 Application relationship protocol machines (ARPMs) . 56
9.1 AREP mapping to data-link layer . 56
9.2 Application relationship protocol machines (ARPMs) . 66
9.3 AREP state machine primitive definitions . 82
9.4 AREP state machine functions . 83
10 DLL mapping protocol machine (DMPM) . 84
10.1 DMPM States . 84
10.2 DMPM state table . 85
10.3 Primitives exchanged between data-link layer and DMPM . 91
10.4 Functions used by DMPM . 93
Bibliography . 95
Figure 1 – Insertion of identification information in the FMS PDU . 29
Figure 2 – Identification . 30
Figure 3 – Coding with identification . 31
Figure 4 – Coding without identification . 31
Figure 5 – Representation of the value true . 31
IEC 61158-6-9:2014 © IEC 2014 – 3 –
Figure 6 – Representation of the value false . 31
Figure 7 – Coding of data of data type Integer16 . 32
Figure 8 – Coding of data of data type Unsigned16 . 32
Figure 9 – Coding of data of data type Floating Point . 33
Figure 10 – Coding of data of data type Visible String .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.