EN 61061-1:2006

Non-impregnated densified laminated wood for electrical purposes - Part 1: Definitions, designation and general requirements

This part of IEC 61061 includes the definitions required for the understanding of all three parts of the standard, the designation of the material types and the general requirements applicable to non-impregnated densified laminated wood for electrical purposes. This specification is intended to cover only sheets and rings of nominal thicknesses between 6 mm and 100 mm, inclusive.

Nicht-imprägniertes Kunstharzpressholz für elektrotechnische Zwecke - Teil 1: Begriffe, Bezeichnung und allgemeine Anforderungen

Stratifiés de bois densifié, non imprégnés, à usages électriques - Partie 1: Définitions, désignation et prescriptions générales

La CEI 61061-1:2006 comprend les définitions nécessaires à la compréhension des trois parties de la norme, la désignation des types de matériaux et les exigences générales applicables aux stratifiés de bois densifié, non imprégnés, à usages électriques. La présente spécification est prévue pour s'appliquer uniquement aux planches et aux anneaux d'épaisseurs nominales comprises entre 6 mm et 100 mm inclus. Les principales modifications suivantes ont été apportées par rapport à l'édition précédente: - ajout des cas d'emploi et des déclarations de sécurité; - redéfinition de l'anneau et de la planche; - ajouts pertinents aux paragraphes; - remise en forme du texte pour l'aligner sur le format actuel des documents CEI.

Neimpregnirani zgoščeni laminirani les za električne namene – 1. del: Definicije, oznake in splošne zahteve (IEC 61061-1:2006)

General Information

• Status: Published
• Publication Date: 11-Dec-2006
• Withdrawal Date: 31-Oct-2009
• ICS: 01.040.29 - Electrical engineering (Vocabularies)
• ICS: 17.220.99 - Other standards related to electricity and magnetism
• ICS: 29.035.01 - Insulating materials in general
• ICS: 29.035.99 - Other insulating materials
• Technical Committee: CLC/SR 15 - Insulating materials
• Drafting Committee: IEC/TC 15 - IEC_TC_15
• Parallel Committee: IEC/TC 15 - IEC_TC_15
• Current Stage: 6060 - Document made available - Publishing
• Start Date: 12-Dec-2006
• Completion Date: 12-Dec-2006
• Ref Project: SIST EN 61061-1:2007 - Non-impregnated densified laminated wood for electrical purposes -- Part 1: Definitions, designation and general requirements

Relations

• Replaces: EN 61061-1:1998 - Non-impregnated densified laminated wood for electrical purposes - Part 1: Definitions, designation and general requirements
• Effective Date: 29-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61061-1:2007
01-november-2007
1DGRPHãþD
SIST EN 61061-1:2001
1HLPSUHJQLUDQL]JRãþHQLODPLQLUDQLOHV]DHOHNWULþQHQDPHQH±GHO'HILQLFLMH
R]QDNHLQVSORãQH]DKWHYH,(&
Non-impregnated densified laminated wood for electrical purposes -- Part 1: Definitions,
designation and general requirements (IEC 61061-1:2006)
Nicht-imprägniertes Kunstharzpressholz für elektrotechnische Zwecke -- Teil 1: Begriffe,
Bezeichnung und allgemeine Anforderungen (IEC 61061-1:2006)
Stratifiés de bois densifié, non imprégnés, a usages électriques -- Partie 1: Définitions,
désignation et prescriptions générales (IEC 61061-1:2006)
Ta slovenski standard je istoveten z: EN 61061-1:2006
ICS:
01.040.29 Elektrotehnika (Slovarji) Electrical engineering
(Vocabularies)
29.035.99 Drugi izolacijski materiali Other insulating materials
SIST EN 61061-1:2007 en,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 61061-1

NORME EUROPÉENNE
December 2006
EUROPÄISCHE NORM

ICS 17.220.99; 29.035.01 Supersedes EN 61061-1:1998


English version


Non-impregnated densified laminated wood
for electrical purposes
Part 1: Definitions, designation and general requirements
(IEC 61061-1:2006)


Stratifiés de bois densifié, non imprégnés, Nicht-imprägniertes Kunstharzpressholz
à usages électriques für elektrotechnische Zwecke
Partie 1: Définitions, désignation Teil 1: Begriffe, Bezeichnung
et prescriptions générales und allgemeine Anforderungen
(CEI 61061-1:2006) (IEC 61061-1:2006)




This European Standard was approved by CENELEC on 2006-11-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, the Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2006 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61061-1:2006 E

---------------------- Page: 2 ----------------------

EN 61061-1:2006 - 2 -
Foreword
The text of document 15/343/FDIS, future edition 3 of IEC 61061-1, prepared by IEC TC 15, Solid
electrical insulating materials, was submitted to the IEC-CENELEC parallel vote and was approved by
CENELEC as EN 61061-1 on 2006-11-01.
This European Standard supersedes EN 61061-1:1998.
The main changes from EN 61061-1:1998 are as follows:
– addition of application use and safety statements;
– redefinition of ring and sheet;
– appropriate additions to the subclauses;
– reformatting of text to bring it in line with current IEC document format.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2007-08-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2009-11-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61061-1:2006 was approved by CENELEC as a European
Standard without any modification.
__________

---------------------- Page: 3 ----------------------

- 3 - EN 61061-1:2006
Annex ZA
(normative)

Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.

Publication Year Title EN/HD Year

1) 2)
IEC 60296 - Fluids for el
...