EN 62341-5-2:2013

Organic light emitting diode (OLED) displays - Part 5-2: Mechanical endurance testing methods

IEC 62341-5-2:2013 defines testing methods for evaluating mechanical endurance quality of Organic Light Emitting Diode (OLED) display panels and modules or their packaged form for transportation. It takes into account, wherever possible, the environmental testing methods outlined in specific parts of IEC 60068. The object of this standard is to establish uniform preferred test methods for judging the mechanical endurance properties of OLED display devices.

Anzeigen mit organischen Leuchtdioden (OLED) - Teil 5-2: Prüfverfahren für mechanische Belastbarkeit

Afficheurs à diodes électroluminescentes organiques (OLED) - Partie 5-2: Méthodes d’essais d'endurance mécanique

La CEI 62341-5-2:2013 définit des méthodes d'essais pour évaluer la qualité de l'endurance mécanique de modules et de panneaux d'affichage à diodes électroluminescentes organiques (OLED) ou de leur emballage d'expédition. Elle tient compte, dans la mesure du possible, des méthodes d'essais d'environnement indiquées dans des parties spécifiques de la CEI 60068. La présente norme a pour objet d'établir des méthodes d'essais préférentielles uniformes pour juger les propriétés d'endurance mécanique des dispositifs d'affichage OLED.

Prikazovalniki z organskimi svetlečimi diodami (OLED) - 5-2. del: Metode za preskušanje mehanske zdržljivosti (IEC 62341-5-2:2013)

Ta del standarda IEC 62341 določa metode za preskušanje kakovosti mehanske vzdržljivosti plošč in modulov prikazovalnikov z organskimi svetlečimi diodami (OLED) ali transportne embalaže le-teh. Kadar je to mogoče, upošteva metode okoljskega preskušanja, kot je navedeno v določenih delih standarda IEC 60068. Cilj tega standarda je vzpostaviti enotne priporočene preskusne metode za ocenjevanje lastnosti mehanske vzdržljivosti prikazovalnikov z organskimi svetlečimi diodami (OLED). Običajno obstajata dve kategoriji preskusov mehanske vzdržljivosti: tista, ki se nanaša na okolje uporabe izdelka, in tista, ki se nanaša na transportno okolje izdelka v pakirani obliki. Vibracije, udarci, kvazistatična moč, štiritočkovni upogibni preskus in preskus odpornosti proti luščenju so tukaj določene za okolje uporabe, medtem ko se za transportno okolje uporablja preskus s padcem med transportom. Preskusi mehanske vzdržljivosti se lahko razvrstijo tudi tako: preskusi za mobilne telefone, prenosne računalnike ali monitorje in velike televizorje. Upoštevajo se posebne zahteve ali omejitve metod za preskušanje glede na velikost ali uporabo preskusnega vzorca.

General Information

• Status: Withdrawn
• Publication Date: 12-Sep-2013
• Withdrawal Date: 12-Aug-2016
• ICS: 31.260 - Optoelectronics. Laser equipment
• Technical Committee: CLC/SR 110 - Flat panel display devices
• Drafting Committee: IEC/TC 110 - IEC_TC_110
• Ref Project: SIST EN 62341-5-2:2014 - Organic light emitting diode (OLED) displays - Part 5-2: Mechanical endurance test methods

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Organic light emitting diode (OLED) displays - Part 5-2: Mechanical endurance test methods31.120Elektronske prikazovalne napraveElectronic display devicesICS:Ta slovenski standard je istoveten z:EN 62341-5-2:2013SIST EN 62341-5-2:2014en01-maj-2014SIST EN 62341-5-2:2014SLOVENSKI
STANDARD



SIST EN 62341-5-2:2014



EUROPEAN STANDARD EN 62341-5-2 NORME EUROPÉENNE
EUROPÄISCHE NORM September 2013
CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2013 CENELEC -
All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62341-5-2:2013 E
ICS 31.260
English version
Organic light emitting diode (OLED) displays -
Part 5-2: Mechanical endurance testing methods (IEC 62341-5-2:2013)
Afficheurs à diodes électroluminescentes organiques (OLED) -
Partie 5-2: Méthodes d’essais d'endurance mécanique (CEI 62341-5-2:2013)
Anzeigen mit organischen Leuchtdioden (OLED) -
Teil 5-2: Prüfverfahren für mechanische Belastbarkeit (IEC 62341-5-2:2013)
This European Standard was approved by CENELEC on 2013-08-13. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
SIST EN 62341-5-2:2014



EN 62341-5-2:2013 - 2 -
Foreword The text of document 110/472/FDIS, future edition 1 of IEC 62341-5-2, prepared by IEC TC 110 "Electronic display devices" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62341-5-2:2013. The following dates are fixed: • latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2014-05-13 • latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2016-08-13
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 62341-5-2:2013 was approved by CENELEC as a European Standard without any modification. SIST EN 62341-5-2:2014



- 3 - EN 62341-5-2:2013
Annex ZA
(normative)
Normative references to international publications with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
NOTE
When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies.
Publication Year Title EN/HD Year
IEC 60068-2-6 2007 Environmental testing -
Part 2-6: Tests - Test Fc: Vibration (sinusoidal)
EN 60068-2-6 2008
IEC 60068-2-27 2008 Environmental testing -
Part 2-27: Tests - Test Ea and guidance: Shock EN 60068-2-27 2009
IEC 61747-5 1998 Liquid crystal and solid-state display devices - Part 5: Environmental, endurance and mechanical test methods EN 61747-5 1998
IEC 61747-5-3 (mod) 2009 Liquid crystal display devices -
Part 5-3: Environmental, endurance and mechanical test methods - Glass strength and reliability EN 61747-5-3 2010
IEC 62341-1-2 2007 Organic light emitting diode displays -
Part 1-2: Terminology and letter symbols EN 62341-1-2 2009
IEC 62341-5 2009 Organic Light Emitting Diode (OLED)
displays -
Part 5: Environmental testing methods EN 62341-5 2009
IEC 62341-6-1 2009 Organic light emitting diode (OLED) displays - Part 6-1: Measuring methods of optical and electro-optical parameters EN 62341-6-1 2011
IEC 62341-6-2 2012 Organic light emitting diode (OLED) displays -
...