EN 61158-5-3:2012
(Main)Industrial communication networks - Fieldbus specifications - Part 5-3: Application layer service definition - Type 3 elements
Industrial communication networks - Fieldbus specifications - Part 5-3: Application layer service definition - Type 3 elements
IEC 61158-5-3:2010(E) defines in an abstract way the externally visible service provided by Type 3 fieldbus Applicatio Layer in terms of an abstract model for defining application resources (objects) capable of being manipulated by users via the use of the FAL service, the primitive actions and events of the service; the parameters associated with each primitive action and event, and the form which they take; and the interrelationship between these actions and events, and their valid sequences. This second edition cancels and replaces the first edition published in 2007 and constitutes a technical revision. The main change with respect to the previous edition is the correction in 6.2.3.2.3.2 (referencing the error-codes in IEC 61158-6-3, 5.3.17 to maintain the codes only in one place).
Industrielle Kommunikationsnetze - Feldbusse - Teil 5-3: Dienstfestlegungen des Application Layer (Anwendungsschicht) - Typ 3-Elemente
Réseaux de communication industriels - Spécifications des bus de terrain - Partie 5-3: Définition des services des couches d'application - Eléments de type 3
Industrijska komunikacijska omrežja - Specifikacije za procesno vodilo - 5-3. del: Definicija opravil na aplikacijskem nivoju - Elementi tipa 3 (IEC 61158-5-3:2010)
Ta standard spada v skupino standardov, namenjenih spodbujanju medsebojne povezave sestavnih delov avtomatizacijskega sistema. Povezan je z drugimi standardi v sklopu, kakor je opredeljeno s »trinivojskim« referenčnim modelom procesnih vodil iz standarda IEC/TR 61158-1. Ta poddel vsebuje material, specifičen za procesna vodila tipa 3.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2012
1DGRPHãþD
SIST EN 61158-5-3:2008
Industrijska komunikacijska omrežja - Specifikacije za procesno vodilo - 5-3. del:
Definicija opravil na aplikacijskem nivoju - Elementi tipa 3 (IEC 61158-5-3:2010)
Industrial communication networks - Fieldbus specifications - Part 5-3: Application layer
service definition - Type 3 elements (IEC 61158-5-3:2010)
Industrielle Kommunikationsnetze - Feldbusse - Teil 5-3: Dienstfestlegungen des
Application Layer (Anwendungsschicht) - Typ 3-Elemente (IEC 61158-5-3:2010)
Réseaux de communication industriels - Spécifications des bus de terrain - Partie 5-3:
Définition des services des couches d'application - Eléments de type 3 (IEC 61158-5-
3:2010)
Ta slovenski standard je istoveten z: EN 61158-5-3:2012
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.100.70 Uporabniški sloj Application layer
35.110 Omreževanje Networking
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 61158-5-3
NORME EUROPÉENNE
June 2012
EUROPÄISCHE NORM
ICS 25.040.40; 35.100.70; 35.110 Supersedes EN 61158-5-3:2008
English version
Industrial communication networks -
Fieldbus specifications -
Part 5-3: Application layer service definition -
Type 3 elements
(IEC 61158-5-3:2010)
Réseaux de communication industriels - Industrielle Kommunikationsnetze -
Spécifications des bus de terrain - Feldbusse -
Partie 5-3: Définition des services des Teil 5-3: Dienstfestlegungen des
couches d'application - Application Layer (Anwendungsschicht) -
Eléments de type 3 Typ 3-Elemente
(CEI 61158-5-3:2010) (IEC 61158-5-3:2010)
This European Standard was approved by CENELEC on 2012-03-28. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the CEN-CENELEC Management Centre has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland, Turkey and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61158-5-3:2012 E
Foreword
The text of document 65C/606/FDIS, future edition 2 of IEC 61158-5-3, prepared by SC 65C, "Industrial
networks", of IEC/TC 65, "Industrial-process measurement, control and automation" was submitted to the
IEC-CENELEC parallel vote and approved by CENELEC as EN 61158-5-3:2012.
The following dates are fixed:
(dop) 2012-12-28
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2015-03-28
standards conflicting with the
document have to be withdrawn
This document supersedes EN 61158-5-3:2008.
3:2008:
— Correction in 6.2.3.2.3.2 (referencing the error-codes in EN 61158-6-3:2012, 5.3.17 to maintain the
codes only in one place).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.
Endorsement notice
The text of the International Standard IEC 61158-5-3:2010 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC/TR 61158-1:2010 NOTE Harmonized as CLC/TR 61158-1:2010 (not modified).
IEC 61158-6-10:2010 NOTE Harmonized as EN 61158-6-10:2012 (not modified).
- 3 - EN 61158-5-3:2012
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
IEC 61131-1 - Programmable controllers - EN 61131-1 -
Part 1: General information
IEC 61158-3-3 2007 Industrial communication networks - Fieldbus EN 61158-3-3 2008
specifications -
Part 3-3: Data-link layer service definition -
Type 3 elements
IEC 61158-4-3 2010 Industrial communication networks - Fieldbus EN 61158-4-3 2012
specifications -
Part 4-3: Data-link layer protocol specification
- Type 3 elements
IEC 61158-5-10 2010 Industrial communication networks - Fieldbus EN 61158-5-10 2012
specifications -
Part 5-10: Application layer service definition -
Type 10 elements
IEC 61158-6-3 2010 Industrial communication networks - Fieldbus EN 61158-6-3 2012
specifications -
Part 6-3: Application layer protocol
specification - Type 3 elements
ISO/IEC 7498-1 - Information technology - Open Systems - -
Interconnection - Basic Reference Model:
The Basic Model
ISO/IEC 8822 - Information technology - Open Systems - -
Interconnection - Presentation service
definition
ISO/IEC 8824 - Information technology - Open Systems - -
Interconnection - Specification of Abstract
Syntax Notation One (ASN.1)
ISO/IEC 9545 - Information technology - Open Systems - -
Interconnection - Application Layer structure
ISO/IEC 10731 - Information technology - Open Systems - -
Interconnection - Basic reference model -
Conventions for the definition of OSI services
IEC 61158-5-3 ®
Edition 2.0 2010-08
INTERNATIONAL
STANDARD
colour
inside
Industrial communication networks – Fieldbus specifications –
Part 5 3: Application layer service definition – Type 3 elements
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
PRICE CODE
XP
ICS 25.04.40; 35.100.70; 35.110 ISBN 978-2-88912-106-9
– 2 – 61158-5-3 © IEC:2010(E)
CONTENTS
FOREWORD.11
INTRODUCTION.13
1 Scope.14
1.1 General .14
1.2 Overview .14
1.3 Specifications.15
1.4 Conformance.15
2 Normative references .15
3 Terms, definitions, abbreviations, symbols and conventions .16
3.1 Referenced terms and definitions .16
3.2 Fieldbus Application Layer type 3 – specific terms and definitions .17
3.3 Abbreviations and symbols.25
3.4 Conventions .25
4 Concepts .32
5 Data type ASE.32
6 Communication model specification.32
6.1 DP concepts.32
6.2 ASEs.52
6.3 Summary of FAL classes .430
6.4 Permitted FAL services by AREP role. 431
6.5 Conformance classes .435
6.6 Application characteristics.436
Bibliography.438
Figure 1 – Example of DP communication with a single controlling device .35
Figure 2 – Example of DP communication with several controlling devices .35
Figure 3 – Example of DP communication between field devices .36
Figure 4 – DP-slave model (modular DP-slave).38
Figure 5 – DP-slave model (compact DP-slave) .39
Figure 6 – Overview of application processes .40
Figure 7 – DP-slave model (modular DP-slave).41
Figure 8 – Application Service Elements (ASEs) .43
Figure 9 – Application Process with application Objects (APOs) .44
Figure 10 – Access to a remote APO .45
Figure 11 – Access to a remote APO for publisher/subscriber association .46
Figure 12 – Example of one AR with two AREPs.47
Figure 13 – Relation of a simple process data object to the real object .53
Figure 14 – Relation of a combined process data object to the real objects.55
Figure 15 – Sequence of an isochronous DP cycle with one DP-master (class 1).86
Figure 16 – Additional time relationships in a DP system operating in isochronous
mode .
Figure 17 – DP system with optimized isochronous DP cycle .89
Figure 18 – Buffered synchronized isochronous mode at the DP-master (class 1).91
61158-5-3 © IEC:2010(E) – 3 –
Figure 19 – Enhanced synchronized isochronous mode at the DP-master (class 1) .92
Figure 20 – Input, output and PLL state machine interaction .92
Figure 21 – PLL state diagram .98
Figure 22 – OUTPUT state diagram .102
Figure 23 – INPUT state diagram.106
Figure 24 – Treatment of an alarm in the DP system. 139
Figure 25 – Load Region state diagram for erasable memory.237
Figure 26 – Load region state diagram for non erasable memory .238
Figure 27 – Function invocation state diagram .270
Figure 28 – System architecture .284
Figure 29 – Assignment of communication relationship to application relationship . 291
Figure 30 – MS0 application relationship .297
Figure 31 – Output buffer model of a DP-slave without sync functionality.298
Figure 32 – Output buffer model of a DP-slave with sync functionality .298
Figure 33 – Input buffer model of a DP-slave without freeze functionality.299
Figure 34 – Input buffer model of a DP-slave with freeze functionality.299
Figure 35 – MS1 application relationship .300
Figure 36 – MS2 application relat
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.