DE/EE-01019-2-7

Inženiring opreme (EE) - Pogoji okolja in preskusi vplivov okolja za telekomunikacijsko opremo – Del 2-7: Specifikacija preskusov vplivov okolja - Prenosna in nestacionarna uporaba

General Information

Status
Published
Publication Date
26-May-1994
Current Stage
12 - Completion
Due Date
28-Apr-1994
Completion Date
27-May-1994

Buy Standard

Standard
ETS 300 019-2-7:1999
English language
20 pages
world standards week 20% off
Preview
world standards week 20% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST ETS 300 019-2-7:1999
01-november-1999
Inženiring opreme (EE) - Pogoji okolja in preskusi vplivov okolja za
telekomunikacijsko opremo – Del 2-7: Specifikacija preskusov vplivov okolja -
Prenosna in nestacionarna uporaba
Equipment Engineering (EE); Environmental conditions and environmental tests for

telecommunications equipment; Part 2-7: Specification of environmental tests; Portable

and non-stationary use
Ta slovenski standard je istoveten z: ETS 300 019-2-7 Edition 1
ICS:
19.040 Preskušanje v zvezi z Environmental testing
okoljem
33.050.01 Telekomunikacijska Telecommunication terminal
terminalska oprema na equipment in general
splošno
SIST ETS 300 019-2-7:1999 en

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST ETS 300 019-2-7:1999
---------------------- Page: 2 ----------------------
SIST ETS 300 019-2-7:1999
EUROPEAN ETS 300 019-2-7
TELECOMMUNICATION May 1994
STANDARD
Source: ETSI TC-EE Reference: DE/EE-1019-2-7
ICS: 33.080
Environment, specification, equipment
Key words:
Equipment Engineering (EE);
Environmental conditions and environmental tests for
telecommunications equipment
Part 2-7: Specification of environmental tests
Portable and non-stationary use
ETSI
European Telecommunications Standards Institute
ETSI Secretariat
F-06921 Sophia Antipolis CEDEX - FRANCE
Postal address:
650 Route des Lucioles - Sophia Antipolis - Valbonne - FRANCE
Office address:
c=fr, a=atlas, p=etsi, s=secretariat - secretariat@etsi.fr
X.400: Internet:
Tel.: +33 92 94 42 00 - Fax: +33 93 65 47 16

Copyright Notification: No part may be reproduced except as authorized by written permission. The copyright and the

foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 1994. All rights reserved.
New presentation - see History box
---------------------- Page: 3 ----------------------
SIST ETS 300 019-2-7:1999
Page 2
ETS 300 019-2-7: May 1994

Whilst every care has been taken in the preparation and publication of this document, errors in content,

typographical or otherwise, may occur. If you have comments concerning its accuracy, please write to

"ETSI Editing and Committee Support Dept." at the address shown on the title page.

---------------------- Page: 4 ----------------------
SIST ETS 300 019-2-7:1999
Page 3
ETS 300 019-2-7: May 1994
Contents

Foreword .......................................................................................................................................................5

1 Scope ..................................................................................................................................................7

2 Normative references..........................................................................................................................7

3 Environmental test specifications........................................................................................................7

3.1 Specification T 7.1: Temperature-controlled locations ........................................................8

3.2 Specification T 7.2: Partly temperature-controlled locations..............................................10

3.3 Specification T 7.3: Partly weatherprotected and non-weatherprotected locations ...........12

3.4 Specification T 7.3E: Partly weatherprotected and non-weatherprotected locations -

extended ............................................................................................................................14

3.5 Notes to tables 1 to 6.........................................................................................................18

Annex A (informative): Bibliography.......................................................................................................19

History..........................................................................................................................................................20

---------------------- Page: 5 ----------------------
SIST ETS 300 019-2-7:1999
Page 4
ETS 300 019-2-7: May 1994
Blank page
---------------------- Page: 6 ----------------------
SIST ETS 300 019-2-7:1999
Page 5
ETS 300 019-2-7: May 1994
Foreword

This multi-part European Telecommunication Standard (ETS) has been produced by the Equipment

Engineering (EE) Technical Committee of the European Telecommunications Standards Institute (ETSI).

ETS 300 019 is concerned with environmental conditions and environmental tests for telecommunications

equipment and comprises two main parts, each with subdivisions:
- ETS 300 019-1: "Classification of environmental conditions".

Part 1 specifies different standardised environmental classes covering climatic and biological

conditions, chemically and mechanically active substances and mechanical conditions during

storage, transportation and in use.
- ETS 300 019-2: "Specification of environmental tests".

Part 2 specifies the recommended test severities and test methods for the different environmental

classes.

Part 2-0 forms a general overview of Part 2. This part (Part 2-7), deals with portable and non-stationary

use.
---------------------- Page: 7 ----------------------
SIST ETS 300 019-2-7:1999
Page 6
ETS 300 019-2-7: May 1994
Blank page
---------------------- Page: 8 ----------------------
SIST ETS 300 019-2-7:1999
Page 7
ETS 300 019-2-7: May 1994
1 Scope

This European Telecommunication Standard (ETS) specifies test methods and severities for the

verification of the required resistibility of equipment according to the relevant environmental class.

The tests defined in Part 2-7 of this multi-part standard apply to portable and non-stationary use of

equipment, covering the environments stated in ETS 300 019-1-7 [1].
2 Normative references

This ETS incorporates by dated or undated reference, provisions from other publications. These

normative references are cited at the appropriate places in the text and the publications are listed

hereafter. For dated references, subsequent amendments to or revisions of any of these publications

apply to this ETS only when incorporated in it by amendment or revision. For undated references the latest

edition of the publication referred to applies.
[1] ETS 300 019-1-7: "Equipment Engineering (EE); Environmental conditions and
environmental tests for telecommunications equipment Part 1-7: Classification
of environmental conditions; Portable and non-stationary use".
[2] IEC 68-2: "Basic environmental testing procedures. Part 2: Tests".
[3] ETS 300 019-2-0: "Equipment Engineering (EE); Environmental conditions and
environmental tests for telecommunications equipment Part 2-0: Specification of
environmental tests; Introduction".
3 Environmental test specifications

The detailed descriptions of the environmental conditions are given in Clauses 4 and 5 of ETS 300 019-1-

7 [1].
ETS 300 019-2-0 [3] forms a general overview of Part 2 of this ETS.

The equipment under test is assumed to be in its operational state throughout the test conditions

described in this Part unless otherwise stated. The required performance before, during and after the test

needs to be specified in the product specification. Input and load conditions of the equipment shall be

chosen to obtain full utilisation of the equipment under test. The heat dissipation shall be maximised,

except for the steady state, low temperature test, where it shall be minimised.
---------------------- Page: 9 ----------------------
SIST ETS 300 019-2-7:1999
Page 8
ETS 300 019-2-7: May 1994
3.1 Specification T 7.1: Temperature-controlled locations

This specification applies to use at, and direct transfer between, permanently temperature-controlled enclosed locations where humidity is usually not controlled. See

tables 1, 5 and 6.

Table 1: Test specification T 7.1: Temperature-controlled locations - climatic tests

Environmental parameter Environmental Environmental test specification T 7.1: Portable,

Class 7.1 temperature-controlled locations

Type Parameter Detail parameter Characteristic Test severity Duration Reference Method

severity
low (°C) +5 +5 (7) 16 h IEC 68-2-1 Ab/Ad: Cold (6)

_________________________________________________________________________________________________________________________________________________________________________________

Air high (°C) +40 +40 (1) or 16 h IEC 68-2-2 Bb/Bd: Dry heat
+50 (17)

_________________________________________________________________________________________________________________________________________________________________________________

temperature
change (°C) +5/+25 +5/+25 (9) 3 cycles IEC 68-2-14 Na: Change of
t = 3 h temperature
low (%) 5 (2) (8)

____________________________________________________________________________________________________________________________________________________________

relative high (%) 85 85 4 d IEC 68-2-56 Cb: Damp heat
(°C) +30 steady state

____________________________________________________________________________________________________________________________________________________________

condensation yes
(%) 90-100 2 cycles IEC 68-2-30 Db: Damp heat
(°C) +30 cyclic, variant 1

_________________________________________________________________________________________________________________________________________________________________________________

Humidity
absolute low (g/m ) 1 none (2) (8)

____________________________________________________________________________________________________________________________________________________________

high (g/m ) 25 (10)
Air pressure low (kPa) 70 none

____________________________________________________________________________________________________________________________________________________________

high (kPa) 106 none

_________________________________________________________________________________________________________________________________________________________________________________

speed (m/s) 5,0 none
rain intensity no

____________________________________________________________________________________________________________________________________________________________

low temperature no

_________________________________________________________________________________________________________________________________________________________________________________

Water other sources no

_________________________________________________________________________________________________________________________________________________________________________________

icing & frosting no
Radiation solar (W/m)700 (3)

_________________________________________________________________________________________________________________________________________________________________________________

heat (W/m)600 (3)
(continued)
---------------------- Page: 10 ----------------------
SIST ETS 300 019-2-7:1999

Table 1 (concluded): Test specification T 7.1: Temperature-controlled locations - climatic tests

Environmental parameter Environmental Environmental test specification T 7.1: Portable,

Class 7.1 temperature-controlled locations

Type Parameter Detail parameter Characteristic Test severity Duration Reference Method

severity
sulphur SO (mg/m ) 0,3/1,0 (4) none (5)

____________________________________________________________________________________________________________________________________________________________

H S (mg/m ) 0,1/0,5 (4) none (5)

_________________________________________________________________________________________________________________________________________________________________________________

salts sea and road salt none (5)
mist

____________________________________________________________________________________________________________________________________________________________

chlorine Cl (mg/m ) 0,1/0,3 (4) none (5)

____________________________________________________________________________________________________________________________________________________________

Chemically
active HCl (mg/m ) 0,1/0,5 (4) none (5)

_________________________________________________________________________________________________________________________________________________________________________________

sub-
stances nitrogen NO (mg/m ) 0,5/1,0 (4) none (5)

____________________________________________________________________________________________________________________________________________________________

NH (mg/m ) 1,0/3,0 (4) none (5)

_________________________________________________________________________________________________________________________________________________________________________________

hydrogen
fluoride HF (mg/m ) 0,01/0,03 (4) none (5)

_________________________________________________________________________________________________________________________________________________________________________________

ozone O (mg/m ) 0,05/0,1 (4) none (5)
sedimentation
Mechanically dust (mg/(m h)) 1,5 (2)

____________________________________________________________________________________________________________________________________________________________

active
substances suspension (mg/m ) 0,2 (2)

____________________________________________________________________________________________________________________________

sand (mg/m ) 30 (2)
Flora and micro organisms no

Fauna ____________________________________________________________________________________________________________________________

rodents, insects no

no = this condition does not occur in this class. (n) = NOTE (n = number of note), see subclause 3.5.

none = verification is required only in special cases.
Page 9
ETS 300 019-2-7: May 1994
---------------------- Page: 11 ----------------------
SIST ETS 300 019-2-7:1999
Page 10
ETS 300 019-2-7: May 1994
3.2 Specification T 7.2: Partly temperature-controlled locations

This specification applies to use at and direct transfer between, enclosed locations having neither temperature nor humidity control but where heating may be used to

avoid low temperatures. Building construction avoids extremely high temperatures. See tables 2, 5 and 6.

Table 2: Test specification T 7.2: Partly temperature-controlled locations - climatic tests

Environmental parameter Environmental Environmental test specification T 7.2: Portable,

Class 7.2 partly temperature-controlled locations

Type Parameter Detail parameter Characteristic Test severity Duration Reference Method

severity
low (°C) -5 -5 (7) 16 h IEC 68-2-1 Ab/Ad: Cold (6)

_________________________________________________________________________________________________________________________________________________________________________________

Air high (°C) +45 +45 (1) or +55 16 h IEC 68-2-2 Bb/Bd: Dry heat

_________________________________________________________________________________________________________________________________________________________________________________

temperature
change (°C) -5/+25 -5/+25 (9) 3 cycles IEC 68-2-14 Na: Change of
t = 3 h temperature
low (%) 5 (2) (8)

____________________________________________________________________________________________________________________________________________________________

relative high (%) 95 93 4 d IEC 68-2-56 Cb: Damp heat
(°C) +30 steady state

____________________________________________________________________________________________________________________________________________________________

condensation yes
(%) 90-100 2 cycles IEC 68-2-30 Db: Damp heat
(°C) +30 cyclic, variant 1

_________________________________________________________________________________________________________________________________________________________________________________

Humidity
absolute low (g/m ) 1 none (2) (8)

____________________________________________________________________________________________________________________________________________________________

high (g/m ) 29 (10)
Air pressure low (kPa) 70 none

____________________________________________________________________________________________________________________________________________________________

high (kPa) 106 none

_________________________________________________________________________________________________________________________________________________________________________________

speed (m/s) 5,0 none
rain intensity no

____________________________________________________________________________________________________________________________________________________________

low temperature no

_________________________________________________________________________________________________________________________________________________________________________________

Water other sources dripping water none (16)

_________________________________________________________________________________________________________________________________________________________________________________

icing & frosting yes none
Radiation solar (W/m)700 (3)

_________________________________________________________________________________________________________________________________________________________________________________

heat (W/m)600 (3)
(continued)
---------------------- Page: 12 ----------------------
SIST ETS 300 019-2-7:1999

Table 2 (concluded): Test specification T 7.2: Partly temperature-controlled locations - climatic tests

Environmental parameter Environmental Environmental test specification T 7.2: Portable,

Class 7.2 temperature-controlled locations

Type Parameter Detail parameter Characteristic Test severity Duration Reference Method

severity
sulphur SO (mg/m ) 0,3/1,0 (4) none (5)

____________________________________________________________________________________________________________________________________________________________

H S (mg/m ) 0,1/0,5 (4) none (5)

_________________________________________________________________________________________________________________________________________________________________________________

salts sea and road salt none (5)
mist

____________________________________________________________________________________________________________________________________________________________

chlorine
Cl (mg/m ) 0,1/0,3 (4) none (5)

____________________________________________________________________________________________________________________________________________________________

Chemically
active HCl (mg/m ) 0,1/0,5 (4) none (5)

_________________________________________________________________________________________________________________________________________________________________________________

sub-
stances nitrogen NO (mg/m ) 0,5/1,0 (4) none (5)

____________________________________________________________________________________________________________________________________________________________

NH (mg/m ) 1,0/3,0 (4) none (5)

_________________________________________________________________________________________________________________________________________________________________________________

hydrogen
fluoride HF (mg/m ) 0,01/0,03 (4) none (5)

_________________________________________________________________________________________________________________________________________________________________________________

ozone O3 (mg/m ) 0,05/0,1 (4) none (5)
sedimentation
Mechanically dust (mg/(m h)) 20 (2)

____________________________________________________________________________________________________________________________________________________________

active
substances suspension (mg/m ) 5,0 (2)

_________________________________________________________________________________________________________________________________________________________________________________

sand (mg/m ) 300 (2)
Flora and micro organisms mould,fungus, etc. none (5)

_________________________________________________________________________________________________________________________________________________________________________________

Fauna
rodents, insects rodents, etc. none (5)

no = this condition does not occur in this class. (n) = NOTE (n = number of note), see subclause 3.5.

none = verification is required only in special cases.
Page 11
ETS 300 019-2-7: May 1994
---------------------- Page: 13 ----------------------
SIST ETS 300 019-2-7:1999
Page 12
ETS 300 019-2-7: May 1994
3.3 Specifi
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.