ETSI ES 204 915-9 V1.1.1 (2008-05)
Open Service Access (OSA); Application Programming Interface (API); Part 9: Generic Messaging SCF (Parlay 6)
Open Service Access (OSA); Application Programming Interface (API); Part 9: Generic Messaging SCF (Parlay 6)
DES/TISPAN-01032-9-OSA
Odprti dostop do storitve (OSA) - Aplikacijski programski vmesnik (API) - 9. del: Lastnost storitvene zmožnosti (SCF) za generično sporočanje (Parlay 6)
General Information
Buy Standard
Standards Content (Sample)
ETSI ES 204 915-9 V1.1.1 (2008-05)
ETSI Standard
Open Service Access (OSA);
Application Programming Interface (API);
Part 9: Generic Messaging SCF
(Parlay 6)
�
---------------------- Page: 1 ----------------------
2 ETSI ES 204 915-9 V1.1.1 (2008-05)
Reference
DES/TISPAN-01032-9-OSA
Keywords
API, IDL, OSA, UML
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2008.
© The Parlay Group 2008.
All rights reserved.
TM TM TM TM
DECT , PLUGTESTS , UMTS , TIPHON , the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered
for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
ETSI
---------------------- Page: 2 ----------------------
3 ETSI ES 204 915-9 V1.1.1 (2008-05)
Contents
Intellectual Property Rights.6
Foreword.6
1 Scope.7
2 References.7
3 Definitions and abbreviations.7
3.1 Definitions.7
3.2 Abbreviations.7
4 Generic Messaging SCF.7
5 Sequence Diagrams.8
5.1 Prepare Mailbox.8
5.2 Open Mailbox.9
5.3 Get Message.9
5.4 Get Folder Information.10
5.5 Close Mailbox.11
6 Class Diagrams.11
7 The Service Interface Specifications.12
7.1 Interface Specification Format .12
7.1.1 Interface Class.12
7.1.2 Method descriptions.12
7.1.3 Parameter descriptions.13
7.1.4 State Model.13
7.2 Base Interface.13
7.2.1 Interface Class IpInterface .13
7.3 Service Interfaces.13
7.3.1 Overview.13
7.4 Generic Service Interface .13
7.4.1 Interface Class IpService .13
7.4.1.1 Method setCallback().14
7.4.1.2 Method setCallbackWithSessionID().14
8 Generic Messaging Interface Classes.14
8.1 Interface Class IpMessagingManager .15
8.1.1 Method openMailbox().15
8.1.2 Method enableMessagingNotification().16
8.1.3 Method disableMessagingNotification().16
8.2 Interface Class IpAppMessagingManager.16
8.2.1 Method mailboxTerminated().17
8.2.2 Method mailboxFaultDetected().17
8.2.3 Method messagingEventNotify().17
8.2.4 Method messagingNotificationTerminated().18
8.3 Interface Class IpMailbox .18
8.3.1 Method close().18
8.3.2 Method lock().19
8.3.3 Method unlock().19
8.3.4 Method getInfoAmount().19
8.3.5 Method getInfoProperties().20
8.3.6 Method setInfoProperties().20
8.3.7 Method openFolder().21
8.3.8 Method createFolder().21
8.3.9 Method remove().21
8.4 Interface Class IpMailboxFolder.22
8.4.1 Method getInfoAmount().22
ETSI
---------------------- Page: 3 ----------------------
4 ETSI ES 204 915-9 V1.1.1 (2008-05)
8.4.2 Method getInfoProperties().23
8.4.3 Method setInfoProperties().23
8.4.4 Method putMessage().24
8.4.5 Method getMessage().24
8.4.6 Method close().25
8.4.7 Method remove().25
8.5 Interface Class IpMessage.25
8.5.1 Method getInfoAmount().26
8.5.2 Method getInfoProperties().26
8.5.3 Method setInfoProperties().27
8.5.4 Method remove().28
8.5.5 Method getContent().28
9 State Transition Diagrams.28
10 Data Definitions.29
10.1 Event notification Definitions .29
10.1.1 TpMessagingEventName.29
10.1.2 TpMessagingEventCriteria.29
10.1.3 TpGMSNewMessageArrivedCriteria.29
10.1.4 TpMessagingEventInfo.29
10.1.5 TpGMSNewMessageArrivedInfo.30
10.2 Generic Messaging Data Definitions.30
10.2.1 IpMessagingManager.30
10.2.2 IpMessagingManagerRef.30
10.2.3 IpAppMessagingManager.30
10.2.4 IpAppMessagingManagerRef.30
10.2.5 IpMailbox.30
10.2.6 IpMailboxRef.30
10.2.7 IpMailboxFolder.30
10.2.8 IpMailboxFolderRef.30
10.2.9 IpMessage.30
10.2.10 IpMessageRef .30
10.2.11 TpFolderInfoProperty.31
10.2.12 TpFolderInfoPropertyName.31
10.2.13 TpFolderInfoPropertySet.31
10.2.14 TpMailboxFolderIdentifier.31
10.2.15 TpMailboxIdentifier.31
10.2.16 TpMailboxInfoProperty.32
10.2.17 TpMailboxInfoPropertyName.32
10.2.18 TpMailboxInfoPropertySet.32
10.2.19 TpMessage.32
10.2.20 TpMessageFormat.32
10.2.21 TpMessageInfoProperty.32
10.2.22 TpMessageInfoPropertyName.33
10.2.23 TpMessageInfoPropertySet.33
10.2.24 TpMessagePriority.33
10.2.25 TpMessageStatus.34
10.2.26 TpMessagingFault.34
11 Exception Classes.34
Annex A (normative): OMG IDL Description of Generic Messaging SCF .35
Annex B (informative): W3C WSDL Description of Generic Messaging SCF.36
Annex C (informative): Java™ API Description of the Generic Messaging SCF .37
Annex D (informative): Record of changes .38
D.1 Interfaces.38
D.1.1 New.38
D.1.1 Deprecated.38
D.1.3 Removed.38
ETSI
---------------------- Page: 4 ----------------------
5 ETSI ES 204 915-9 V1.1.1 (2008-05)
D.2 Methods.38
D.2.1 New.38
D.2.2 Deprecated.38
D.2.3 Modified.39
D.2.4 Removed.39
D.3 Data Definitions.39
D.3.1 New.39
D.3.2 Modified.39
D.3.3 Removed.39
D.4 Service Properties.39
D.4.1 New.39
D.4.2 Deprecated.40
D.4.3 Modified.40
D.4.4 Removed.40
D.5 Exceptions.40
D.5.1 New.40
D.5.2 Modified.40
D.5.3 Removed.40
D.6 Others.40
History .41
ETSI
---------------------- Page: 5 ----------------------
6 ETSI ES 204 915-9 V1.1.1 (2008-05)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This ETSI Standard (ES) has been produced by ETSI Technical Committee Telecommunications and Internet
converged Services and Protocols for Advanced Networking (TISPAN).
The present document is part 9 of a multi-part deliverable covering Open Service Access (OSA); Application
Programming Interface (API), as identified below. The API specification (ES 204 915) is structured in the following
parts:
Part 1: "Overview";
Part 2: "Common Data Definitions";
Part 3: "Framework";
Part 4: "Call Control";
Part 5: "User Interaction SCF";
Part 6: "Mobility SCF";
Part 7: "Terminal Capabilities SCF";
Part 8: "Data Session Control SCF";
Part 9: "Generic Messaging SCF";
Part 10: "Connectivity Manager SCF";
Part 11: "Account Management SCF";
Part 12: "Charging SCF";
Part 13: "Policy Management SCF";
Part 14: "Presence and Availability Management SCF";
Part 15: "Multi-Media Messaging SCF";
Part 16: "Service Broker SCF".
The present document has been defined jointly between ETSI, The Parlay Group (http://www.parlay.org) and the 3GPP,
in co-operation with a number of JAIN™ Community (http://www.java.sun.com/products/jain) member companies.
The present document forms part of the Parlay 6.0 set of specifications.
ETSI
---------------------- Page: 6 ----------------------
7 ETSI ES 204 915-9 V1.1.1 (2008-05)
1 Scope
The present document is part 9 of the Stage 3 specification for an Application Programming Interface (API) for Open
Service Access (OSA).
The OSA specifications define an architecture that enables application developers to make use of network functionality
through an open standardised interface, i.e. the OSA APIs.
The present document specifies the Generic Messaging Service Capability Feature (SCF) aspects of the interface. All
aspects of the Generic Messaging SCF are defined here, these being:
• Sequence Diagrams.
• Class Diagrams.
• Interface specification plus detailed method descriptions.
• State Transition diagrams.
• Data Definitions.
• IDL Description of the interfaces.
The process by which this task is accomplished is through the use of object modelling techniques described by the
Unified Modelling Language (UML).
2 References
The references listed in clause 2 of ES 204 915-1 contain provisions which, through reference in this text, constitute
provisions of the present document.
ETSI ES 204 915-1: "Open Service Access (OSA); Application Programming Interface (API); Part 1: Overview
(Parlay 6)".
3 Definitions and abbreviations
3.1 Definitions
For the purposes of the present document, the terms and definitions given in ES 204 915-1 apply.
3.2 Abbreviations
For the purposes of the present document, the abbreviations given in ES 204 915-1 apply.
4 Generic Messaging SCF
The following clauses describe each aspect of the Generic Messaging Service Capability Feature (SCF).
The order is as follows:
• The Sequence diagrams give the reader a practical idea of how each of the SCF is implemented.
• The Class relationships clause shows how each of the interfaces applicable to the SCF, relate to one another.
ETSI
---------------------- Page: 7 ----------------------
8 ETSI ES 204 915-9 V1.1.1 (2008-05)
• The Interface specification clause describes in detail each of the interfaces shown within the Class diagram
part.
• The State Transition Diagrams (STD) show the transition between states in the SCF. The states and transitions
are well-defined; either methods specified in the Interface specification or events occurring in the underlying
networks cause state transitions.
• The Data Definitions clause shows a detailed expansion of each of the data types associated with the methods
within the classes. Note that some data types are used in other methods and classes and are therefore defined
within the Common Data types part ES 204 915-2.
An implementation of this API which supports or implements a method described in the present document, shall
support or implement the functionality described for that method, for at least one valid set of values for the parameters
of that method. Where a method is not supported by an implementation of a Service interface, the exception
P_METHOD_NOT_SUPPORTED shall be returned to any call of that method.
5 Sequence Diagrams
5.1 Prepare Mailbox
: : :
IpAppLogic IpAppMess agingManager IpMessagingManager
1: new()
2: enableMessagingNotification( )
3: messagingEventNotify( )
4: 'forward event'
1: This message is used by the application to create an object implementing the IpAppMessagingManager
interface.
2: This message is used to enable the notification mechanism so that events can be sent to the application.
When new mail, that matches the event criteria set in message 2, arrives a message indicating the presence of
new mail (not shown) is directed to the object implementing the IpMessagingManager.
3: This message is used to pass the new mail event to the object implementing the IpAppMessagingManager
interface.
4: This message is used to forward message 3 to the IpAppLogic.
ETSI
---------------------- Page: 8 ----------------------
9 ETSI ES 204 915-9 V1.1.1 (2008-05)
5.2 Open Mailbox
: : : IpMailbox
IpAppLogic IpMessagingManager
1: openMailbox( )
2: new()
1: This message requests the object implementing the IpMessagingManager interface to create an object
implementing the IpMailbox interface.
2: Assuming that the criteria for creating an object implementing the IpMailbox interface is met, message 2 is
used to create it.
5.3 Get Message
: : IpMailbox : IpMailboxFolder : IpMessage
IpAppLogic
1: openFolder( )
2: getInfoAmount( )
3: getInfoProperties( )
4: getMessage( )
5: new()
1: This message requests a folder to be opened and returns a reference to that folder.
2: This message requests the number of folder information properties of the opened folder.
3: This message requests all of the folder information properties.
ETSI
---------------------- Page: 9 ----------------------
10 ETSI ES 204 915-9 V1.1.1 (2008-05)
4: This message requests a message from the opened mailbox folder.
5: Assuming that the criteria for creating an object implementing the IpMessage interface are met, the (internal)
message 5 is used to create it.
5.4 Get Folder Information
: :
IpAppLogic IpMailboxFolder
1: getInfoAmount( )
2: getInfoProperties( )
3: getInfoProperties( )
1: This message requests the number of folder i
...
Final draft ETSI ES 204 915-9 V1.1.1 (2008-02)
ETSI Standard
Open Service Access (OSA);
Application Programming Interface (API);
Part 9: Generic Messaging SCF
(Parlay 6)
�
---------------------- Page: 1 ----------------------
2 Final draft ETSI ES 204 915-9 V1.1.1 (2008-02)
Reference
DES/TISPAN-01032-9-OSA
Keywords
API, IDL, OSA, UML
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2008.
© The Parlay Group 2008.
All rights reserved.
TM TM TM TM
DECT , PLUGTESTS , UMTS , TIPHON , the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered
for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
ETSI
---------------------- Page: 2 ----------------------
3 Final draft ETSI ES 204 915-9 V1.1.1 (2008-02)
Contents
Intellectual Property Rights.6
Foreword.6
1 Scope.7
2 References.7
3 Definitions and abbreviations.7
3.1 Definitions.7
3.2 Abbreviations.7
4 Generic Messaging SCF.7
5 Sequence Diagrams.8
5.1 Prepare Mailbox.8
5.2 Open Mailbox.9
5.3 Get Message.9
5.4 Get Folder Information.10
5.5 Close Mailbox.11
6 Class Diagrams.11
7 The Service Interface Specifications.12
7.1 Interface Specification Format .12
7.1.1 Interface Class.12
7.1.2 Method descriptions.12
7.1.3 Parameter descriptions.13
7.1.4 State Model.13
7.2 Base Interface.13
7.2.1 Interface Class IpInterface .13
7.3 Service Interfaces.13
7.3.1 Overview.13
7.4 Generic Service Interface .13
7.4.1 Interface Class IpService .13
7.4.1.1 Method setCallback().14
7.4.1.2 Method setCallbackWithSessionID().14
8 Generic Messaging Interface Classes.14
8.1 Interface Class IpMessagingManager .15
8.1.1 Method openMailbox().15
8.1.2 Method enableMessagingNotification().16
8.1.3 Method disableMessagingNotification().16
8.2 Interface Class IpAppMessagingManager.16
8.2.1 Method mailboxTerminated().17
8.2.2 Method mailboxFaultDetected().17
8.2.3 Method messagingEventNotify().17
8.2.4 Method messagingNotificationTerminated().18
8.3 Interface Class IpMailbox .18
8.3.1 Method close().18
8.3.2 Method lock().19
8.3.3 Method unlock().19
8.3.4 Method getInfoAmount().19
8.3.5 Method getInfoProperties().20
8.3.6 Method setInfoProperties().20
8.3.7 Method openFolder().21
8.3.8 Method createFolder().21
8.3.9 Method remove().21
8.4 Interface Class IpMailboxFolder.22
8.4.1 Method getInfoAmount().22
ETSI
---------------------- Page: 3 ----------------------
4 Final draft ETSI ES 204 915-9 V1.1.1 (2008-02)
8.4.2 Method getInfoProperties().23
8.4.3 Method setInfoProperties().23
8.4.4 Method putMessage().24
8.4.5 Method getMessage().24
8.4.6 Method close().25
8.4.7 Method remove().25
8.5 Interface Class IpMessage.25
8.5.1 Method getInfoAmount().26
8.5.2 Method getInfoProperties().26
8.5.3 Method setInfoProperties().27
8.5.4 Method remove().28
8.5.5 Method getContent().28
9 State Transition Diagrams.28
10 Data Definitions.29
10.1 Event notification Definitions .29
10.1.1 TpMessagingEventName.29
10.1.2 TpMessagingEventCriteria.29
10.1.3 TpGMSNewMessageArrivedCriteria.29
10.1.4 TpMessagingEventInfo.29
10.1.5 TpGMSNewMessageArrivedInfo.30
10.2 Generic Messaging Data Definitions.30
10.2.1 IpMessagingManager.30
10.2.2 IpMessagingManagerRef.30
10.2.3 IpAppMessagingManager.30
10.2.4 IpAppMessagingManagerRef.30
10.2.5 IpMailbox.30
10.2.6 IpMailboxRef.30
10.2.7 IpMailboxFolder.30
10.2.8 IpMailboxFolderRef.30
10.2.9 IpMessage.30
10.2.10 IpMessageRef .30
10.2.11 TpFolderInfoProperty.31
10.2.12 TpFolderInfoPropertyName.31
10.2.13 TpFolderInfoPropertySet.31
10.2.14 TpMailboxFolderIdentifier.31
10.2.15 TpMailboxIdentifier.31
10.2.16 TpMailboxInfoProperty.32
10.2.17 TpMailboxInfoPropertyName.32
10.2.18 TpMailboxInfoPropertySet.32
10.2.19 TpMessage.32
10.2.20 TpMessageFormat.32
10.2.21 TpMessageInfoProperty.32
10.2.22 TpMessageInfoPropertyName.33
10.2.23 TpMessageInfoPropertySet.33
10.2.24 TpMessagePriority.33
10.2.25 TpMessageStatus.34
10.2.26 TpMessagingFault.34
11 Exception Classes.34
Annex A (normative): OMG IDL Description of Generic Messaging SCF .35
Annex B (informative): W3C WSDL Description of Generic Messaging SCF.36
Annex C (informative): Java™ API Description of the Generic Messaging SCF .37
Annex D (informative): Record of changes .38
D.1 Interfaces.38
D.1.1 New.38
D.1.1 Deprecated.38
D.1.3 Removed.38
ETSI
---------------------- Page: 4 ----------------------
5 Final draft ETSI ES 204 915-9 V1.1.1 (2008-02)
D.2 Methods.38
D.2.1 New.38
D.2.2 Deprecated.38
D.2.3 Modified.39
D.2.4 Removed.39
D.3 Data Definitions.39
D.3.1 New.39
D.3.2 Modified.39
D.3.3 Removed.39
D.4 Service Properties.39
D.4.1 New.39
D.4.2 Deprecated.40
D.4.3 Modified.40
D.4.4 Removed.40
D.5 Exceptions.40
D.5.1 New.40
D.5.2 Modified.40
D.5.3 Removed.40
D.6 Others.40
History .41
ETSI
---------------------- Page: 5 ----------------------
6 Final draft ETSI ES 204 915-9 V1.1.1 (2008-02)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This ETSI Standard (ES) has been produced by ETSI Technical Committee Telecommunications and Internet
converged Services and Protocols for Advanced Networking (TISPAN), and is now submitted for the ETSI standards
Membership Approval Procedure.
The present document is part 9 of a multi-part deliverable covering Open Service Access (OSA); Application
Programming Interface (API), as identified below. The API specification (ES 204 915) is structured in the following
parts:
Part 1: "Overview";
Part 2: "Common Data Definitions";
Part 3: "Framework";
Part 4: "Call Control";
Part 5: "User Interaction SCF";
Part 6: "Mobility SCF";
Part 7: "Terminal Capabilities SCF";
Part 8: "Data Session Control SCF";
Part 9: "Generic Messaging SCF";
Part 10: "Connectivity Manager SCF";
Part 11: "Account Management SCF";
Part 12: "Charging SCF";
Part 13: "Policy Management SCF";
Part 14: "Presence and Availability Management SCF";
Part 15: "Multi-Media Messaging SCF";
Part 16: "Service Broker SCF".
The present document has been defined jointly between ETSI, The Parlay Group (http://www.parlay.org) and the 3GPP,
in co-operation with a number of JAIN™ Community (http://www.java.sun.com/products/jain) member companies.
The present document forms part of the Parlay 6.0 set of specifications.
ETSI
---------------------- Page: 6 ----------------------
7 Final draft ETSI ES 204 915-9 V1.1.1 (2008-02)
1 Scope
The present document is part 9 of the Stage 3 specification for an Application Programming Interface (API) for Open
Service Access (OSA).
The OSA specifications define an architecture that enables application developers to make use of network functionality
through an open standardised interface, i.e. the OSA APIs.
The present document specifies the Generic Messaging Service Capability Feature (SCF) aspects of the interface. All
aspects of the Generic Messaging SCF are defined here, these being:
• Sequence Diagrams.
• Class Diagrams.
• Interface specification plus detailed method descriptions.
• State Transition diagrams.
• Data Definitions.
• IDL Description of the interfaces.
The process by which this task is accomplished is through the use of object modelling techniques described by the
Unified Modelling Language (UML).
2 References
The references listed in clause 2 of ES 204 915-1 contain provisions which, through reference in this text, constitute
provisions of the present document.
ETSI ES 204 915-1: "Open Service Access (OSA); Application Programming Interface (API); Part 1: Overview
(Parlay 6)".
3 Definitions and abbreviations
3.1 Definitions
For the purposes of the present document, the terms and definitions given in ES 204 915-1 apply.
3.2 Abbreviations
For the purposes of the present document, the abbreviations given in ES 204 915-1 apply.
4 Generic Messaging SCF
The following clauses describe each aspect of the Generic Messaging Service Capability Feature (SCF).
The order is as follows:
• The Sequence diagrams give the reader a practical idea of how each of the SCF is implemented.
• The Class relationships clause shows how each of the interfaces applicable to the SCF, relate to one another.
ETSI
---------------------- Page: 7 ----------------------
8 Final draft ETSI ES 204 915-9 V1.1.1 (2008-02)
• The Interface specification clause describes in detail each of the interfaces shown within the Class diagram
part.
• The State Transition Diagrams (STD) show the transition between states in the SCF. The states and transitions
are well-defined; either methods specified in the Interface specification or events occurring in the underlying
networks cause state transitions.
• The Data Definitions clause shows a detailed expansion of each of the data types associated with the methods
within the classes. Note that some data types are used in other methods and classes and are therefore defined
within the Common Data types part ES 204 915-2.
An implementation of this API which supports or implements a method described in the present document, shall
support or implement the functionality described for that method, for at least one valid set of values for the parameters
of that method. Where a method is not supported by an implementation of a Service interface, the exception
P_METHOD_NOT_SUPPORTED shall be returned to any call of that method.
5 Sequence Diagrams
5.1 Prepare Mailbox
: : :
IpAppLogic IpAppMess agingManager IpMessagingManager
1: new()
2: enableMessagingNotification( )
3: messagingEventNotify( )
4: 'forward event'
1: This message is used by the application to create an object implementing the IpAppMessagingManager
interface.
2: This message is used to enable the notification mechanism so that events can be sent to the application.
When new mail, that matches the event criteria set in message 2, arrives a message indicating the presence of
new mail (not shown) is directed to the object implementing the IpMessagingManager.
3: This message is used to pass the new mail event to the object implementing the IpAppMessagingManager
interface.
4: This message is used to forward message 3 to the IpAppLogic.
ETSI
---------------------- Page: 8 ----------------------
9 Final draft ETSI ES 204 915-9 V1.1.1 (2008-02)
5.2 Open Mailbox
: : : IpMailbox
IpAppLogic IpMessagingManager
1: openMailbox( )
2: new()
1: This message requests the object implementing the IpMessagingManager interface to create an object
implementing the IpMailbox interface.
2: Assuming that the criteria for creating an object implementing the IpMailbox interface is met, message 2 is
used to create it.
5.3 Get Message
: : IpMailbox : IpMailboxFolder : IpMessage
IpAppLogic
1: openFolder( )
2: getInfoAmount( )
3: getInfoProperties( )
4: getMessage( )
5: new()
1: This message requests a folder to be opened and returns a reference to that folder.
2: This message requests the number of folder information properties of the opened folder.
3: This message requests all of the folder information properties.
ETSI
---------------------- Page: 9 ----------------------
10 Final draft ETSI ES 204 915-9 V1.1.1 (2008-02)
4: This message requests a message from the opened mailbox folder.
5: Assuming that the criteria for creating an object implementing the IpMessage interface are met, the (internal)
message 5 is used
...
SLOVENSKI STANDARD
SIST ES 204 915-9 V1.1.1:2008
01-september-2008
2GSUWLGRVWRSGRVWRULWYH 26$ $SOLNDFLMVNLSURJUDPVNLYPHVQLN $3, GHO
/DVWQRVWVWRULWYHQH]PRåQRVWL 6&) ]DJHQHULþQRVSRURþDQMH 3DUOD\
Open Service Access (OSA) - Application Programming Interface (API) - Part 9: Generic
Messaging SCF (Parlay 6)
Ta slovenski standard je istoveten z: ES 204 915-9 Version 1.1.1
ICS:
35.100.01 Medsebojno povezovanje Open systems
odprtih sistemov na splošno interconnection in general
SIST ES 204 915-9 V1.1.1:2008 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST ES 204 915-9 V1.1.1:2008
---------------------- Page: 2 ----------------------
SIST ES 204 915-9 V1.1.1:2008
ETSI ES 204 915-9 V1.1.1 (2008-05)
ETSI Standard
Open Service Access (OSA);
Application Programming Interface (API);
Part 9: Generic Messaging SCF
(Parlay 6)
�
---------------------- Page: 3 ----------------------
SIST ES 204 915-9 V1.1.1:2008
2 ETSI ES 204 915-9 V1.1.1 (2008-05)
Reference
DES/TISPAN-01032-9-OSA
Keywords
API, IDL, OSA, UML
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88
Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 2008.
© The Parlay Group 2008.
All rights reserved.
TM TM TM TM
DECT , PLUGTESTS , UMTS , TIPHON , the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered
for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
ETSI
---------------------- Page: 4 ----------------------
SIST ES 204 915-9 V1.1.1:2008
3 ETSI ES 204 915-9 V1.1.1 (2008-05)
Contents
Intellectual Property Rights.6
Foreword.6
1 Scope.7
2 References.7
3 Definitions and abbreviations.7
3.1 Definitions.7
3.2 Abbreviations.7
4 Generic Messaging SCF.7
5 Sequence Diagrams.8
5.1 Prepare Mailbox.8
5.2 Open Mailbox.9
5.3 Get Message.9
5.4 Get Folder Information.10
5.5 Close Mailbox.11
6 Class Diagrams.11
7 The Service Interface Specifications.12
7.1 Interface Specification Format .12
7.1.1 Interface Class.12
7.1.2 Method descriptions.12
7.1.3 Parameter descriptions.13
7.1.4 State Model.13
7.2 Base Interface.13
7.2.1 Interface Class IpInterface .13
7.3 Service Interfaces.13
7.3.1 Overview.13
7.4 Generic Service Interface .13
7.4.1 Interface Class IpService .13
7.4.1.1 Method setCallback().14
7.4.1.2 Method setCallbackWithSessionID().14
8 Generic Messaging Interface Classes.14
8.1 Interface Class IpMessagingManager .15
8.1.1 Method openMailbox().15
8.1.2 Method enableMessagingNotification().16
8.1.3 Method disableMessagingNotification().16
8.2 Interface Class IpAppMessagingManager.16
8.2.1 Method mailboxTerminated().17
8.2.2 Method mailboxFaultDetected().17
8.2.3 Method messagingEventNotify().17
8.2.4 Method messagingNotificationTerminated().18
8.3 Interface Class IpMailbox .18
8.3.1 Method close().18
8.3.2 Method lock().19
8.3.3 Method unlock().19
8.3.4 Method getInfoAmount().19
8.3.5 Method getInfoProperties().20
8.3.6 Method setInfoProperties().20
8.3.7 Method openFolder().21
8.3.8 Method createFolder().21
8.3.9 Method remove().21
8.4 Interface Class IpMailboxFolder.22
8.4.1 Method getInfoAmount().22
ETSI
---------------------- Page: 5 ----------------------
SIST ES 204 915-9 V1.1.1:2008
4 ETSI ES 204 915-9 V1.1.1 (2008-05)
8.4.2 Method getInfoProperties().23
8.4.3 Method setInfoProperties().23
8.4.4 Method putMessage().24
8.4.5 Method getMessage().24
8.4.6 Method close().25
8.4.7 Method remove().25
8.5 Interface Class IpMessage.25
8.5.1 Method getInfoAmount().26
8.5.2 Method getInfoProperties().26
8.5.3 Method setInfoProperties().27
8.5.4 Method remove().28
8.5.5 Method getContent().28
9 State Transition Diagrams.28
10 Data Definitions.29
10.1 Event notification Definitions .29
10.1.1 TpMessagingEventName.29
10.1.2 TpMessagingEventCriteria.29
10.1.3 TpGMSNewMessageArrivedCriteria.29
10.1.4 TpMessagingEventInfo.29
10.1.5 TpGMSNewMessageArrivedInfo.30
10.2 Generic Messaging Data Definitions.30
10.2.1 IpMessagingManager.30
10.2.2 IpMessagingManagerRef.30
10.2.3 IpAppMessagingManager.30
10.2.4 IpAppMessagingManagerRef.30
10.2.5 IpMailbox.30
10.2.6 IpMailboxRef.30
10.2.7 IpMailboxFolder.30
10.2.8 IpMailboxFolderRef.30
10.2.9 IpMessage.30
10.2.10 IpMessageRef .30
10.2.11 TpFolderInfoProperty.31
10.2.12 TpFolderInfoPropertyName.31
10.2.13 TpFolderInfoPropertySet.31
10.2.14 TpMailboxFolderIdentifier.31
10.2.15 TpMailboxIdentifier.31
10.2.16 TpMailboxInfoProperty.32
10.2.17 TpMailboxInfoPropertyName.32
10.2.18 TpMailboxInfoPropertySet.32
10.2.19 TpMessage.32
10.2.20 TpMessageFormat.32
10.2.21 TpMessageInfoProperty.32
10.2.22 TpMessageInfoPropertyName.33
10.2.23 TpMessageInfoPropertySet.33
10.2.24 TpMessagePriority.33
10.2.25 TpMessageStatus.34
10.2.26 TpMessagingFault.34
11 Exception Classes.34
Annex A (normative): OMG IDL Description of Generic Messaging SCF .35
Annex B (informative): W3C WSDL Description of Generic Messaging SCF.36
Annex C (informative): Java™ API Description of the Generic Messaging SCF .37
Annex D (informative): Record of changes .38
D.1 Interfaces.38
D.1.1 New.38
D.1.1 Deprecated.38
D.1.3 Removed.38
ETSI
---------------------- Page: 6 ----------------------
SIST ES 204 915-9 V1.1.1:2008
5 ETSI ES 204 915-9 V1.1.1 (2008-05)
D.2 Methods.38
D.2.1 New.38
D.2.2 Deprecated.38
D.2.3 Modified.39
D.2.4 Removed.39
D.3 Data Definitions.39
D.3.1 New.39
D.3.2 Modified.39
D.3.3 Removed.39
D.4 Service Properties.39
D.4.1 New.39
D.4.2 Deprecated.40
D.4.3 Modified.40
D.4.4 Removed.40
D.5 Exceptions.40
D.5.1 New.40
D.5.2 Modified.40
D.5.3 Removed.40
D.6 Others.40
History .41
ETSI
---------------------- Page: 7 ----------------------
SIST ES 204 915-9 V1.1.1:2008
6 ETSI ES 204 915-9 V1.1.1 (2008-05)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This ETSI Standard (ES) has been produced by ETSI Technical Committee Telecommunications and Internet
converged Services and Protocols for Advanced Networking (TISPAN).
The present document is part 9 of a multi-part deliverable covering Open Service Access (OSA); Application
Programming Interface (API), as identified below. The API specification (ES 204 915) is structured in the following
parts:
Part 1: "Overview";
Part 2: "Common Data Definitions";
Part 3: "Framework";
Part 4: "Call Control";
Part 5: "User Interaction SCF";
Part 6: "Mobility SCF";
Part 7: "Terminal Capabilities SCF";
Part 8: "Data Session Control SCF";
Part 9: "Generic Messaging SCF";
Part 10: "Connectivity Manager SCF";
Part 11: "Account Management SCF";
Part 12: "Charging SCF";
Part 13: "Policy Management SCF";
Part 14: "Presence and Availability Management SCF";
Part 15: "Multi-Media Messaging SCF";
Part 16: "Service Broker SCF".
The present document has been defined jointly between ETSI, The Parlay Group (http://www.parlay.org) and the 3GPP,
in co-operation with a number of JAIN™ Community (http://www.java.sun.com/products/jain) member companies.
The present document forms part of the Parlay 6.0 set of specifications.
ETSI
---------------------- Page: 8 ----------------------
SIST ES 204 915-9 V1.1.1:2008
7 ETSI ES 204 915-9 V1.1.1 (2008-05)
1 Scope
The present document is part 9 of the Stage 3 specification for an Application Programming Interface (API) for Open
Service Access (OSA).
The OSA specifications define an architecture that enables application developers to make use of network functionality
through an open standardised interface, i.e. the OSA APIs.
The present document specifies the Generic Messaging Service Capability Feature (SCF) aspects of the interface. All
aspects of the Generic Messaging SCF are defined here, these being:
• Sequence Diagrams.
• Class Diagrams.
• Interface specification plus detailed method descriptions.
• State Transition diagrams.
• Data Definitions.
• IDL Description of the interfaces.
The process by which this task is accomplished is through the use of object modelling techniques described by the
Unified Modelling Language (UML).
2 References
The references listed in clause 2 of ES 204 915-1 contain provisions which, through reference in this text, constitute
provisions of the present document.
ETSI ES 204 915-1: "Open Service Access (OSA); Application Programming Interface (API); Part 1: Overview
(Parlay 6)".
3 Definitions and abbreviations
3.1 Definitions
For the purposes of the present document, the terms and definitions given in ES 204 915-1 apply.
3.2 Abbreviations
For the purposes of the present document, the abbreviations given in ES 204 915-1 apply.
4 Generic Messaging SCF
The following clauses describe each aspect of the Generic Messaging Service Capability Feature (SCF).
The order is as follows:
• The Sequence diagrams give the reader a practical idea of how each of the SCF is implemented.
• The Class relationships clause shows how each of the interfaces applicable to the SCF, relate to one another.
ETSI
---------------------- Page: 9 ----------------------
SIST ES 204 915-9 V1.1.1:2008
8 ETSI ES 204 915-9 V1.1.1 (2008-05)
• The Interface specification clause describes in detail each of the interfaces shown within the Class diagram
part.
• The State Transition Diagrams (STD) show the transition between states in the SCF. The states and transitions
are well-defined; either methods specified in the Interface specification or events occurring in the underlying
networks cause state transitions.
• The Data Definitions clause shows a detailed expansion of each of the data types associated with the methods
within the classes. Note that some data types are used in other methods and classes and are therefore defined
within the Common Data types part ES 204 915-2.
An implementation of this API which supports or implements a method described in the present document, shall
support or implement the functionality described for that method, for at least one valid set of values for the parameters
of that method. Where a method is not supported by an implementation of a Service interface, the exception
P_METHOD_NOT_SUPPORTED shall be returned to any call of that method.
5 Sequence Diagrams
5.1 Prepare Mailbox
: : :
IpAppLogic IpAppMess agingManager IpMessagingManager
1: new()
2: enableMessagingNotification( )
3: messagingEventNotify( )
4: 'forward event'
1: This message is used by the application to create an object implementing the IpAppMessagingManager
interface.
2: This message is used to enable the notification mechanism so that events can be sent to the application.
When new mail, that matches the event criteria set in message 2, arrives a message indicating the presence of
new mail (not shown) is directed to the object implementing the IpMessagingManager.
3: This message is used to pass the new mail event to the object implementing the IpAppMessagingManager
interface.
4: This message is used to forward message 3 to the IpAppLogic.
ETSI
---------------------- Page: 10 ----------------------
SIST ES 204 915-9 V1.1.1:2008
9 ETSI ES 204 915-9 V1.1.1 (2008-05)
5.2 Open Mailbox
: : : IpMailbox
IpAppLogic IpMessagingManager
1: openMailbox( )
2: new()
1: This message requests the object implementing the IpMessagingManager interface to cr
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.