ETSI ES 202 336-7 V1.1.1 (2009-12)

Environmental Engineering (EE); Monitoring and Control Interface for Infrastructure Equipment (Power, Cooling and Building Environment Systems used in Telecommunication Networks); Part 7: Other utilities system control and monitoring information model

DES/EE-02037-7

Okoljski inženiring (EE) - Nadzorovalni in krmilni vmesnik za infrastrukturno opremo (elektroenergetski, hladilni in stavbni okoljski sistemi v telekomunikacijskih omrežjih) - 7.del: Informacijski model za krmiljenje in nadzorovanje sistema za drugo uporabo

General Information

• Status: Published
• Publication Date: 16-Dec-2009
• Technical Committee: EE 2 - EE Power Supply
• Current Stage: 12 - Completion
• Due Date: 25-Dec-2009
• Completion Date: 17-Dec-2009
• Mandate: M/462
• Ref Project: kSIST prES 202 336-7 V1.1.1:2009 - Environmental Engineering (EE) - Monitoring and Control Interface for Infrastructure Equipment (Power, Cooling and Building Environment Systems used in Telecommunication Networks) - Part 7: Other utilities system control and monitoring information model

Standards Content (Sample)

ETSI ES 202 336-7 V1.1.1 (2009-12)
ETSI Standard

Environmental Engineering (EE);
Monitoring and Control Interface for Infrastructure Equipment
(Power, Cooling and Building Environment Systems used in
Telecommunication Networks);
Part 7: Other utilities system
control and monitoring information model

---------------------- Page: 1 ----------------------
2 ETSI ES 202 336-7 V1.1.1 (2009-12)



Reference
DES/EE-02037-7
Keywords
control, interface, management, power, system
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2009.
All rights reserved.

TM TM TM TM
DECT , PLUGTESTS , UMTS , TIPHON , the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered
for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
LTE™ is a Trade Mark of ETSI currently being registered
for the benefit of its Members and of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI

---------------------- Page: 2 ----------------------
3 ETSI ES 202 336-7 V1.1.1 (2009-12)
Contents
Intellectual Property Rights . 4
Foreword . 4
1 Scope . 5
2 References . 5
2.1 Normative references . 5
2.2 Informative references . 5
3 Definitions and abbreviations . 6
3.1 Definitions . 6
3.2 Abbreviations . 7
4 Other utilities system . 7
Annex A (normative): Summary of mandatory monitoring/supervision information and
f unctions . 9
A.1 Other utilities system . 9
A.1.1 Table for access control system . 9
A.1.2 Table for video monitor system . 10
Annex B (informative): Summary of non-mandatory monitoring/supervision information
and functions . 11
B.1 Access control system . 11
B.2 Video monitor system . 12
Annex C (normative): Mandatory XML structure and elements . 13
C.1 Structure of an XML document for other utilities system . 13
Annex D (informative): Examples of XML elements for other utilities system . 15
D.1 The elements of other utilities system . 15
D.2 The elements of access control system . 15
D.3 The elements of access control system . 15
D.4 The elements of access control system . 16
D.5 The elements of access control system . 16
D.6 The elements of access control system . 16
D.7 The elements of video monitor system . 16
D.8 The elements of video monitor system . 16
D.9 The elements of video monitor system . 17
Annex E (informative): Bibliography . 18
History . 19

ETSI

---------------------- Page: 3 ----------------------
4 ETSI ES 202 336-7 V1.1.1 (2009-12)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This ETSI Standard (ES) has been produced by ETSI Technical Committee Environmental Engineering (EE).
The present document is part 7 of a multi-part deliverable covering Monitoring and control interface for infrastructure
equipment (Power, Cooling and environment systems used in telecommunication networks), as identified below:
Part 1: "Generic Interface";
Part 2: "DC power system control and monitoring information model";
Part 3: "AC UPS power system control and monitoring information model";
Part 4: "AC distribution power system control and monitoring information model";
Part 5: "AC diesel back-up generator system control and monitoring information model";
Part 6: "Air conditioning system control and monitoring information model";
Part 7: "Other utilities system control and monitoring information model";
Part 8: "Remote Power Feeding System control and monitoring information model".
ETSI

---------------------- Page: 4 ----------------------
5 ETSI ES 202 336-7 V1.1.1 (2009-12)
1 Scope
The present document applies to monitoring and control of other utilities for telecommunication equipment.
The present document defines:
• The monitored and controlled other utilities system architectures.
• The minimum set of exchanged information required at the interface, described in "natural language" in text
tables.
• The XML files with tags and variables corresponding to the data in the tables.
2 References
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific.
• For a specific reference, subsequent revisions do not apply.
• Non-specific reference may be made only to a complete document or a part thereof and only in the following
cases:
- if it is accepted that it will be possible to use all future changes of the referenced document for the
purposes of the referring document;
- for informative references.
Referenced documents which are not found to be publicly available in the expected location might be found at
http://docbox.etsi.org/Reference.
NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee
their long term validity.
2.1 Normative references
The following referenced documents are indispensable for the application of the present document. For dated
references, only the edition cited applies. For non-specific references, the latest edition of the referenced document
(including any amendments) applies.
[1] ETSI ES 202 336-1: "Environmental Engineering (EE); Monitoring and Control Interface for
Infrastructure Equipment (Power, Cooling and Building Environment Systems used in
Telecommunication Networks); Part 1: Generic Interface".
[2] IETF RFC 4566: "Session Description Protocol".
2.2 Informative references
The following referenced documents are not essential to the use of the present document but they assist the user with
regard to a particular subject area. For non-specific references, the latest version of the referenced document (including
any amendments) applies.
[i.1] IEEE 802 (part 1 to part 11): "IEEE Standard for Local and Metropolitan Area Networks:
Overview and Architecture".
[i.2] ISO/IEC 8879:1986: "Information processing -- Text and office systems -- Standard Generalized
Markup Language (SGML)".
ETSI

---------------------- Page: 5 ----------------------
6 ETSI ES 202 336-7 V1.1.1 (2009-12)
3 Definitions and abbreviations
3.1 Definitions
For the purposes of the present document, the following terms and definitions apply:
alarm: any information signalling abnormal state, i.e. different to specified normal state of hardware, software,
environment condition (temperature, humidity, etc.)
NOTE: The alarm signal shall be understood by itself by an operator and shall always have at least one severity
qualification or codification (colour, level, etc.).
EXAMPLE: Rectifier failure, battery low volage, etc.
alarm loop: electrical loop which open or closed state correspond to alarm start (set) or end (clear) state
alarm message: text parts of the alarm structure
alarm structure: organized set of information fields in an alarm data frame (time stamp, set/clear, text, etc.)
Control Unit (CU): integrated unit in an equipment to monitor and control this equipment through sensors and
actuators
Data Gathering Unit (DGU): functional unit used for several functions:
• collect serial, digital, and analog data from several equipment;
• option to send (output) serial or digital commands;
• forward/receive information to/from the Local/Remote Management Application via agreed protocols;
• mediation between interfaces and protocols.
NOTE: This function may be integrated as part of specific equipment.
ethernet: LAN protocol
NOTE: Equivalent to IEEE 802.1 to 11 [i.1].
event: any information signalling a change of state which is not an alarm: e.g. battery test, change of state of battery
charge
NOTE: The event signal is be understood by itself by an operator and is always have at least one severity
qualification or codification (color, level, etc.). It is be transmitted in a formatted structure with text
message and other fields like for alarm, e.g. an event can be coded as an alarm with severity "0".
eXtensible Mark-up Language (XML): application profile or restricted form of SGML
NOTE: By construction, XML documents are conforming SGML the Standard Generalized Markup Language
(ISO/IEC 8879 [i.2]). documents. XML is designed to describe data and focus on what data is. XML is
discerned from the well known Hypertext Transfer Mark-up Language (HTML) which was designed to
display data and to focus on how data looks.
Extensible Style sheet Language (XSL): language for expressing style sheets
NOTE: It consists of two parts, a language for transforming XML documents, and an XML vocabulary for
specifying formatting semantics. An XSL style sheet specifies the presentation of a class of XML
documents by describing how an instance of the class is transformed into an XML document that uses the
formatting vocabulary.
infrastructure equipment: power, cooling and building environment systems used in telecommunications centres and
access networks locations
EXAMPLE: Cabinets, shelters, underground locations, etc.
ETSI

---------------------- Page: 6 ----------------------
7 ETSI ES 202 336-7 V1.1.1 (2009-12)
object: class description of items that accept a set of properties or functions
NOTE: Generic objects can include more specific items and inherit from their properties. If correctly structured,
object programming can allow the system to evolve, i.e. be more future-proof. The code should
intrinsically be open and structured.
warning: low severity alarm
World Wide Web Consortium (W3C): consortium founded in October 1994 to develop common interoperable
protocols and promote World Wide Web
NOTE: See http://www.w3c.org.
XCU: CU enabled to communicate using XML interface as defined in the present document
XML Schema Definition (XSD): new more detailed XML description compared to the previous one, the DTD
3.2 Abbreviations
For the purposes of the present document, the following abbreviations apply:
CIF Common Intermediate Format
CU Control Unit of an equipment
CUE Current Using Equipment
D1 4 CIF
DGU Data Gathering Unit
DTD Document Type Definition
FTP File Transfer Protocol
HTML Hypertext Transfer Make-up Language
HTTP Hypertext Transfer Protocol
IP Internet Protocol
LAN Local Array Network
PTZ Pan/Tilt/Zoom
PTZ Pan Tilt Zoom
QCIF Quarter Common Intermediate Format
QVGA Quart VGA
RTSP Real Time Streaming Protocol
RTSP Real Time Streaming Protocol
SDP Session Description Protocol
SGML Standard Generalized Markup Language
TCP Transmission Control Protocol for IP
URL Uniform Resource Locator
VGA Video Graphics Array
XCU XML enabled CU
XCU XML enabled CU
XML eXtensible Markup Language (see W3C)
4 Other utilities system
Other utilities system includes access control system and video monitor system which ensure the safety and reliability
of telecommunication equipment.
Access control system is used to authenticate and control electronic lock. The main elements of access system are:
• secret key (inductive card,
...

Final draft ETSI ES 202 336-7 V1.1.1 (2009-10)
ETSI Standard

Environmental Engineering (EE);
Monitoring and Control Interface for Infrastructure Equipment
(Power, Cooling and Building Environment Systems used in
Telecommunication Networks);
Part 7: Other utilities system
control and monitoring information model

---------------------- Page: 1 ----------------------
2 Final draft ETSI ES 202 336-7 V1.1.1 (2009-10)



Reference
DES/EE-02037-7
Keywords
control, interface, management, power, system
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2009.
All rights reserved.

TM TM TM TM
DECT , PLUGTESTS , UMTS , TIPHON , the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered
for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
LTE™ is a Trade Mark of ETSI currently being registered
for the benefit of its Members and of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI

---------------------- Page: 2 ----------------------
3 Final draft ETSI ES 202 336-7 V1.1.1 (2009-10)
Contents
Intellectual Property Rights . 4
Foreword . 4
1 Scope . 5
2 References . 5
2.1 Normative references . 5
2.2 Informative references . 5
3 Definitions and abbreviations . 6
3.1 Definitions . 6
3.2 Abbreviations . 7
4 Other utilities system . 7
Annex A (normative): Summary of mandatory monitoring/supervision information and
f unctions . 9
A.1 Other utilities system . 9
A.1.1 Table for access control system . 9
A.1.2 Table for video monitor system . 10
Annex B (informative): Summary of non-mandatory monitoring/supervision information
and functions . 11
B.1 Access control system . 11
B.2 Video monitor system . 12
Annex C (normative): Mandatory XML structure and elements . 13
C.1 Structure of an XML document for other utilities system . 13
Annex D (informative): Examples of XML elements for other utilities system . 15
D.1 The elements of other utilities system . 15
D.2 The elements of access control system . 15
D.3 The elements of access control system . 16
D.4 The elements of access control system . 16
D.5 The elements of access control system . 16
D.6 The elements of access control system . 16
D.7 The elements of video monitor system . 16
D.8 The elements of video monitor system . 17
D.9 The elements of video monitor system . 17
Annex E (informative): Bibliography . 18
History . 19

ETSI

---------------------- Page: 3 ----------------------
4 Final draft ETSI ES 202 336-7 V1.1.1 (2009-10)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This ETSI Standard (ES) has been produced by ETSI Technical Committee Environmental Engineering (EE), and is
now submitted for the ETSI standards Membership Approval Procedure.
The present document is part 7 of a multi-part deliverable covering Monitoring and control interface for infrastructure
equipment (Power, Cooling and environment systems used in telecommunication networks), as identified below:
Part 1: "Generic Interface";
Part 2: "DC power system control and monitoring information model";
Part 3: "AC UPS power system control and monitoring information model";
Part 4: "AC distribution power system control and monitoring information model";
Part 5: "AC diesel back-up generator system control and monitoring information model";
Part 6: "Air conditioning system control and monitoring information model";
Part 7: "Other utilities system control and monitoring information model";
Part 8: "Remote Power Feeding System control and monitoring information model".
ETSI

---------------------- Page: 4 ----------------------
5 Final draft ETSI ES 202 336-7 V1.1.1 (2009-10)
1 Scope
The present document applies to monitoring and control of other utilities for telecommunication equipment.
The present document defines:
• The monitored and controlled other utilities system architectures.
• The minimum set of exchanged information required at the interface, described in "natural language" in text
tables.
• The XML files with tags and variables corresponding to the data in the tables.
2 References
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific.
• For a specific reference, subsequent revisions do not apply.
• Non-specific reference may be made only to a complete document or a part thereof and only in the following
cases:
- if it is accepted that it will be possible to use all future changes of the referenced document for the
purposes of the referring document;
- for informative references.
Referenced documents which are not found to be publicly available in the expected location might be found at
http://docbox.etsi.org/Reference.
NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee
their long term validity.
2.1 Normative references
The following referenced documents are indispensable for the application of the present document. For dated
references, only the edition cited applies. For non-specific references, the latest edition of the referenced document
(including any amendments) applies.
[1] ETSI ES 202 336-1: "Environmental Engineering (EE); Monitoring and Control Interface for
Infrastructure Equipment (Power, Cooling and Building Environment Systems used in
Telecommunication Networks); Part 1: Generic Interface".
[2] IETF RFC 4566: "Session Description Protocol".
2.2 Informative references
The following referenced documents are not essential to the use of the present document but they assist the user with
regard to a particular subject area. For non-specific references, the latest version of the referenced document (including
any amendments) applies.
[i.1] IEEE 802 (part 1 to part 11): "IEEE Standard for Local and Metropolitan Area Networks:
Overview and Architecture".
[i.2] ISO/IEC 8879:1986: "Information processing -- Text and office systems -- Standard Generalized
Markup Language (SGML)".
ETSI

---------------------- Page: 5 ----------------------
6 Final draft ETSI ES 202 336-7 V1.1.1 (2009-10)
3 Definitions and abbreviations
3.1 Definitions
For the purposes of the present document, the following terms and definitions apply:
alarm: any information signalling abnormal state, i.e. different to specified normal state of hardware, software,
environment condition (temperature, humidity, etc.)
NOTE: The alarm signal shall be understood by itself by an operator and shall always have at least one severity
qualification or codification (colour, level, etc.).
EXAMPLE: Rectifier failure, battery low volage, etc.
alarm loop: electrical loop which open or closed state correspond to alarm start (set) or end (clear) state
alarm message: text parts of the alarm structure
alarm structure: organized set of information fields in an alarm data frame (time stamp, set/clear, text, etc.)
Control Unit (CU): integrated unit in an equipment to monitor and control this equipment through sensors and
actuators
Data Gathering Unit (DGU): functional unit used for several functions:
• collect serial, digital, and analog data from several equipment;
• option to send (output) serial or digital commands;
• forward/receive information to/from the Local/Remote Management Application via agreed protocols;
• mediation between interfaces and protocols.
NOTE: This function may be integrated as part of specific equipment.
ethernet: LAN protocol
NOTE: Equivalent to IEEE 802.1 to 11 [i.1].
event: any information signalling a change of state which is not an alarm: e.g. battery test, change of state of battery
charge
NOTE: The event signal is be understood by itself by an operator and is always have at least one severity
qualification or codification (color, level, etc.). It is be transmitted in a formatted structure with text
message and other fields like for alarm, e.g. an event can be coded as an alarm with severity "0".
eXtensible Mark-up Language (XML): application profile or restricted form of SGML
NOTE: By construction, XML documents are conforming SGML the Standard Generalized Markup Language
(ISO/IEC 8879 [i.2]). documents. XML is designed to describe data and focus on what data is. XML is
discerned from the well known Hypertext Transfer Mark-up Language (HTML) which was designed to
display data and to focus on how data looks.
Extensible Style sheet Language (XSL): language for expressing style sheets
NOTE: It consists of two parts, a language for transforming XML documents, and an XML vocabulary for
specifying formatting semantics. An XSL style sheet specifies the presentation of a class of XML
documents by describing how an instance of the class is transformed into an XML document that uses the
formatting vocabulary.
infrastructure equipment: power, cooling and building environment systems used in telecommunications centres and
access networks locations
EXAMPLE: Cabinets, shelters, underground locations, etc.
ETSI

---------------------- Page: 6 ----------------------
7 Final draft ETSI ES 202 336-7 V1.1.1 (2009-10)
object: class description of items that accept a set of properties or functions
NOTE: Generic objects can include more specific items and inherit from their properties. If correctly structured,
object programming can allow the system to evolve, i.e. be more future-proof. The code should
intrinsically be open and structured.
warning: low severity alarm
World Wide Web Consortium (W3C): consortium founded in October 1994 to develop common interoperable
protocols and promote World Wide Web
NOTE: See http://www.w3c.org.
XCU: CU enabled to communicate using XML interface as defined in the present document
XML Schema Definition (XSD): new more detailed XML description compared to the previous one, the DTD
3.2 Abbreviations
For the purposes of the present document, the following abbreviations apply:
CIF Common Intermediate Format
CU Control Unit of an equipment
CUE Current Using Equipment
D1 4 CIF
DGU Data Gathering Unit
DTD Document Type Definition
FTP File Transfer Protocol
HTML Hypertext Transfer Make-up Language
HTTP Hypertext Transfer Protocol
IP Internet Protocol
LAN Local Array Network
PTZ Pan/Tilt/Zoom
PTZ Pan Tilt Zoom
QCIF Quarter Common Intermediate Format
QVGA Quart VGA
RTSP Real Time Streaming Protocol
RTSP Real Time Streaming Protocol
SDP Session Description Protocol
SGML Standard Generalized Markup Language
TCP Transmission Control Protocol for IP
URL Uniform Resource Locator
VGA Video Graphics Array
XCU XML enabled CU
XCU XML enabled CU
XML eXtensible Markup Language (see W3C)
4 Other utilities system
Other utilities system includes access control system and video monitor system which ensure the safety and reliability
of telecommunication equipment.
Access control system is used to authenticate and control electronic lock. The main elements of access system are:
• secret
...