ETSI TR 102 495-3 V1.3.1 (2008-02)

Electromagnetic compatibility and Radio spectrum Matters (ERM); System Reference Document; Short Range Devices (SRD); Technical Characteristics for SRD equipment using Ultra-Wideband Sensor Technology (UWB); Part 3: Location tracking applications type 1 operating in the frequency band from 6 GHz to 8,5 GHz for indoor, portable and mobile outdoor applications

RTR/ERM-RM-263-3

General Information

• Status: Published
• Publication Date: 25-Feb-2008
• Technical Committee: ERM WGRM - ERM Radio Matters
• Current Stage: 12 - Completion
• Due Date: 08-Jan-2008
• Completion Date: 26-Feb-2008

Standards Content (Sample)

ETSI TR 102 495-3 V1.3.1 (2008-02)
Technical Report
Electromagnetic compatibility
and Radio spectrum Matters (ERM);
System Reference Document;
Short Range Devices (SRD);
Technical characteristics for SRD equipment using
Ultra Wide Band Sensor technology (UWB);
Part 3: Location tracking applications type 1 operating
in the frequency band from 6 GHz to 8,5 GHz
for indoor, portable and mobile outdoor applications

---------------------- Page: 1 ----------------------
2 ETSI TR 102 495-3 V1.3.1 (2008-02)



Reference
RTR/ERM-RM-263-3
Keywords
radar, radio, short range, SRDoc, testing, UWB
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2008.
All rights reserved.

TM TM TM TM
DECT , PLUGTESTS , UMTS , TIPHON , the TIPHON logo and the ETSI logo are Trade Marks of ETSI registered
for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
ETSI

---------------------- Page: 2 ----------------------
3 ETSI TR 102 495-3 V1.3.1 (2008-02)
Contents
Intellectual Property Rights.4
Foreword.4
Introduction .5
1 Scope.6
2 References.6
2.1 Informative references.7
3 Definitions, symbols and abbreviations .7
3.1 Definitions.7
3.2 Symbols.8
3.3 Abbreviations.8
4 Executive summary.8
4.1 Status of the present document.8
4.2 Market information.9
4.3 Technical system description .9
5 Current regulations.9
6 Proposed regulations.9
7 Main conclusions.9
8 Expected ECC and ETSI actions.10
Annex A: Detailed market information .11
A.1 Range of applications .11
A.2 Market size and value.12
A.3 Traffic evaluation .12
Annex B: Technical information .13
B.1 Detailed technical description .13
B.2 Technical justification for spectrum.14
B.2.1 Technical justification for proposed power levels.15
B.2.2 Technical justification for bandwidth.15
Annex C: Expected compatibility issues .17
C.1 Coexistence issues.17
C.2 Current ITU allocations.17
C.3 Sharing issues.17
History .18

ETSI

---------------------- Page: 3 ----------------------
4 ETSI TR 102 495-3 V1.3.1 (2008-02)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Technical Report (TR) has been produced by ETSI Technical Committee Electromagnetic compatibility and Radio
spectrum Matters (ERM).
The present document is part 3 of a multi-part deliverable covering Electromagnetic compatibility and Radio spectrum
Matters (ERM); Short Range Devices (SRD); Technical characteristics for SRD equipment using Ultra Wide Band
technology (UWB) as identified below:
Part 1: "Building material analysis and classification applications operating in the frequency band from 2,2 GHz
to 8 GHz";
Part 2: "Object Discrimination and Characterization (ODC) applications operating in the frequency band from
2,2 GHz to 8,5 GHz";
Part 3: "Location tracking applications type 1 operating in the frequency band from 6 GHz to 8,5 GHz for
indoor, portable and mobile outdoor applications";
Part 4: "Object identification for surveillance applications operating in the frequency band from 2,2 GHz to
8 GHz";
Part 5: "Location tracking applications type 2 operating in the frequency bands from 3,4 GHz to 4,8 GHz and
from 6 GHz to 8,5 GHz for personnel tracking and industrial applications;
Part 6: "Object Detection for industrial Mobile, construction, agriculture and other off-road applications
operating in the frequency band from 6 GHz to 7,25 GHz (ODM)";
Part 7: "Location tracking and sensor applications for automotive and transportation environments operating in
the frequency band from 3.1 GHz to 4.8 GHz and 6 GHz to 9 GHz".
The difference between version 1.1.1 of TR 102 495-3 and version 1.2.1 of TR 102 495-3 is that in version 1.1.1
operation is limited to indoor usage. Version 1.2.1 covers indoor and portable outdoor applications.
The difference between version 1.2.1 of TR 102 495-3 and version 1.3.1 of TR 102 495-3 is that this new version
covers indoor and portable or mobile outdoor applications under the conditions of the generic ECC decision as amended
in July 2007.
ETSI

---------------------- Page: 4 ----------------------
5 ETSI TR 102 495-3 V1.3.1 (2008-02)
Introduction
Ultra Wide Band (UWB) technology enables a new generation of Location Tracking devices and opens new markets
with very different applications. UWB radio location devices with an operating bandwidth of several GHz allow
centimetre-level localization and positioning even in the presence of severe multipath effects caused by walls, furniture
etc.
It is a viable positioning technology that meets industrial requirements in the following markets:
1) Healthcare.
2) Workplace/Smart Office.
3) Public buildings.
4) Security.
5) Defence training.
6) Entertainment.
7) Logistics, warehouses.
8) Manufacturing assembly lines.
9) Road and rail vehicles.
The purpose of producing the present document is to lay a foundation for industry to quickly bring innovative and
useful products to the market while avoiding any harmful interference with other services and equipment.
ETSI

---------------------- Page: 5 ----------------------
6 ETSI TR 102 495-3 V1.3.1 (2008-02)
1 Scope
The present document defines the requirements for radio frequency usage for Ultra Wide Band (UWB) location
tracking devices type 1. These devices are operating in the frequency range from 6 GHz to 8,5 GHz. Operation is
foreseen for indoor, portable and mobile outdoor applications and the operating distance is limited to a maximum of
about 100 metres. It will include applications from all different markets (see list of markets in introduction).
The type 1 equipment complies with the conditions of the amended generic ECC decision [5]. Type 2 is covered in
part 5 of TR 102 495 [9] and corresponds to a future generation of the equipment.
The present document covers ultra-wideband location tracking tags which are attached to people or objects and tags are
tracked using a fixed receiver infrastructure to only receive the UWB emission emitted by the tags. Equipment covered
by the present document is fitted with an integral or dedicated antenna.
The present document includes necessary information to support the co-operation between ETSI and the Electronic
Communications Committee (ECC) of the European Conference of Post and Telecommunications Administrations
(CEPT), including:
• Detailed market information (annex A).
• Technical information (annex B).
• Expected compatibility issues (annex C).
2 References
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific.
• For a specific reference, subsequent revisions do not apply.
• Non-specific reference may be made only to a complete document or a part thereof and only in the following
cases:
- if it is accepted that it will be possible to use all future changes of the referenced document for the
purposes of the referring document;
- for informative references.
Referenced documents which are not found to be publicly available in the expected location might be found at
http://docbox.etsi.org/Reference.
For online referenced documents, information sufficient to identify and locate the source shall be provided. Preferably,
the primary source of the referenced document should be cited, in order to ensure traceability. Furthermore, the
reference should, as far as possible, remain valid for the expected life of the document. The reference shall include the
method of access to the referenced document and the full network address, with the same punctuation and use of upper
case and lower case letters.
NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee
their long term validity.
ETSI

---------------------- Page: 6 ----------------------
7 ETSI TR 102 495-3 V1.3.1 (2008-02)
2.1 Informative references
The following referenced documents are indispensable for the application of the present document. For dated
references, only the edition cited applies. For non-specific references, the latest edition of the referenced document
(including any amendments) applies.
[1] CEPT/ECC Report 64: "The protection requirements of radiocommunications systems below
10,6 GHz from generic UWB applications", Helsinki, February 2005
http://www.ero.dk/doc98/Official/pdf/ECCREP064.pdf.
[2] CEPT/ERC Report 25: "The European table of frequency allocations and utilizations covering the
frequency range 9 kHz to 275 GHz" Lisboa January 2002 - Dublin 2003 - Turkey 2004 -
Copenhagen 2004.
[3] Document TG3#7-19R0: ("Effects of PSD limits on UWB positioning systems"), submitted to
ECC TG3 meeting, Brest, 1-3 March 2005.
[4] FCC 03-33: "Revision of Part 15 of the Commission's Rules Regarding UWB Transmission
Systems".
[5] ECC/DEC/(06)04: "ECC Decision of 24 March 2006 amended 6. July 2007 at Constanta on the
harmonized conditions for devices using. Ultra-Wideband (UWB) technology in bands below
10.6 GHz.".
[6] Revised Terms of reference for ECC TG3 (July 2006).
[7] Report developed by the European Conference of Postal and Telecommunications Administrations
(CEPT) in response to the European Commission (EC) under the Mandate dealing with the
harmonized technical conditions for the use in the European Union of the mitigation techniques for
UWB applications.
[8] ITU-R, Radio Regulation, Geneva, 2004.
[9] ETSI TR 102 495: " Electromagnetic compatibility and Radio spectrum Matters (ERM); Short
Range Devices (SRD); Technical characteristics for SRD equipment using Ultra Wide Band
Sensor technology (UWB); System Reference Document".
[10] ETSI EN 302 500 (V1.2.1): "Electromagnetic compatibility and Radio spectrum Matters (ERM);
Short Range Devices (SRD) using Ultra WideBand (UWB) technology; Location Tracking
equipment operating in the frequency range from 6 GHz to 8,5 GHz; Part 1: Technical
characteristics and test methods".
[11] ETSI EN 302 500 (V1.1.1): "Electromagnetic compatibility and Radio spectrum Matters (ERM);
Short Range Devices (SRD) using Ultra WideBand (UWB) technology; Location Tracking
equipment operating in the frequency range from 6 GHz to 8,5 GHz; Part 2: Harmonized EN
covering essential requirements of article 3.2 of the R&TTE Directive".
3 Definitions, symbols and abbreviations
3.1 Definitions
For the purposes of the present document, the following terms and definitions apply:
activity factor: reflects the effective transmission time ratio
light licensing: individual regulatory approval (or notification duty) required for each specific installation based on
location and scope
mobile equipment : equipment intended to be used while in motion or during halts at unspecified points
portable equipment: equipment normally used on a stand-alone basis and to be carried around
ETSI

---------------------- Page: 7 ----------------------
8 ETSI TR 102 495-3 V1.3.1 (2008-02)
range resolution: ability to resolve two targets at different ranges
3.2 Symbols
For the purposes of the present document, the following symbols apply:
c velocity of light in a vacuum
δR range resolution or multipath rejection resolution
dBm deciBel relative to 1 mW
T pulse width
P
3.3 Abbreviations
For the purposes of the present document, the following abbreviations apply:
2D/3D Two Dimensional/Three Dimensional
CCTV Closed Circuit TeleVision
CEPT Conference Europeenne des administrations de Postes et des Telecommunications
ECC Electronic Communications Committee
ERC European Radiocommunications Committee
ERM Electromagnetic compatibility and Radio spectrum Matters
GPS Global Positioning System
ITU International Telecommunication Union
LAN Local Area Network
LORAN LOng RAnge Navigation
OoB Out of Band
PRF Pulse Repetition Frequency
PSD Power Spectral Density
RF Radio Frequency
SRD Short Range Device
ToR Terms of Reference
UWB Ultra Wide Band
4 Executive summary
The present document describes devices using Ultra Wide Band Sensor technology for location tracking applications.
In UWB location tracking, small, mobile tags, operating as either transmitters or receivers, or both, are attached to the
objects to be located, or are carried by personnel. A network of reference stations around the area to be covered
communicate with the tags. By analysing, e.g. the time-of-arrival and/or angle-of-arrival of the radio signal relative to
the known reference stations, the 2D/3D position of the tag can be found. Typically, the range between a tag and a
reference station might be up to 100 m, depending on the area to be observed.
There is evidence that these devices can address versatile industrial requirements in many different markets and
therefore, a socio-economic benefit is given.
It is also possible that such a system will significantly enhance the security and safety of persons monitored in different
applications such as health care.
A high precision in range measurement is required. This means that the required signals necessarily demand short pulse
length resulting in a high bandwidth to provide the required accuracy.
4.1 Status of the present document
A previous version of the present document has been agreed by TG31C and included several inputs from ECC TG3.
The present document (TR 102 495-3 V1.3.1) is approved by TC-ERM, for publication. It ta
...