ETSI TS 103 268-2 V1.1.1 (2017-04)

SmartM2M; Smart Appliances Ontology and Communication Framework Testing; Part 2: Protocol Implementation Conformance Statement (PICS) pro forma

DTS/SmartM2M-103 268-2_SAP PIC

General Information

• Status: Published
• Publication Date: 06-Apr-2017
• Technical Committee: SmartM2M - Smart M2M
• Current Stage: 12 - Completion
• Due Date: 15-Apr-2017
• Completion Date: 07-Apr-2017

Standards Content (Sample)

ETSI TS 103 268-2 V1.1.1 (2017-04)






TECHNICAL SPECIFICATION
SmartM2M;
Smart Appliances Ontology and Communication
Framework Testing;
Part 2: Protocol Implementation
Conformance Statement (PICS) pro forma

---------------------- Page: 1 ----------------------
2 ETSI TS 103 268-2 V1.1.1 (2017-04)



Reference
DTS/SmartM2M-103 268-2_SAP PIC
Keywords
IoT, M2M, PICS, Smart Appliance, testing
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the
print of the Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2017.
All rights reserved.

TM TM TM
DECT , PLUGTESTS , UMTS and the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members.
TM
3GPP and LTE™ are Trade Marks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
GSM® and the GSM logo are Trade Marks registered and owned by the GSM Association.
ETSI

---------------------- Page: 2 ----------------------
3 ETSI TS 103 268-2 V1.1.1 (2017-04)
Contents
Intellectual Property Rights . 4
Foreword . 4
Modal verbs terminology . 4
1 Scope . 5
2 References . 5
2.1 Normative references . 5
2.2 Informative references . 5
3 Definitions and abbreviations . 6
3.1 Definitions . 6
3.2 Abbreviations . 6
4 Conformance requirement concerning PICS . 6
Annex A (normative): Smart Appliances Testing PICS Pro forma . 7
A.0 Foreword . 7
A.1 Guidance for completing the ICS pro forma . 7
A.1.1 Purposes and structure . 7
A.1.2 Abbreviations and conventions . 7
A.1.3 Instructions for completing the ICS pro forma . 9
A.2 Identification of the implementation . 9
A.2.1 Introduction . 9
A.2.2 Date of the statement . 9
A.2.3 Implementation Under Test (IUT) identification . 9
A.2.4 System Under Test (SUT) identification . 10
A.2.5 Product supplier . 10
A.2.6 Client (if different from product supplier) . 10
A.2.7 ICS contact person. 11
A.3 Identification of the reference specifications . 11
A.4 Global statement of conformance . 12
A.5 Tables . 12
A.5.1 oneM2M Resource Type Statement . 12
A.5.2 SAREF Device Class Statement . 12
A.5.3 SAREF Function Class Statement . 12
A.5.4 SAREF Service Class Statement . 13
A.5.5 SAREF Property Class Statement . 13
A.5.6 SAREF Command Class Statement . 14
A.5.7 SAREF Device Category Class Statement . 14
A.5.8 SAREF State Class Statement . 15
A.5.9 SAREF Task Class Statement . 15
A.5.10 SAREF Unit of Measure Class Statement . 15
A.5.11 SAREF Commodity Class Statement . 16
A.5.12 SAREF Building Object Class Statement . 16
A.5.13 SAREF Building Space Class Statement . 16
A.5.14 SAREF Profile Class Class Statement. 16
A.5.15 SAREF Function Category Class Statement . 17
A.5.16 SAREF Object Properties Statement . 17
A.5.17 SAREF Data Type Statement . 17
A.5.18 oneM2M Operation Statement . 18
A.5.19 oneM2M Thing Statement . 18
A.5.20 oneM2M Aspect Statement . 18
History . 19
ETSI

---------------------- Page: 3 ----------------------
4 ETSI TS 103 268-2 V1.1.1 (2017-04)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This Technical Specification (TS) has been produced by ETSI Technical Committee Smart Machine-to-Machine
communications (SmartM2M).
The present document is part 2 of a multi-part deliverable covering Conformance test specifications for Smart
Appliances Ontology and Communication Framework Testing as identified below:
Part 1: "Testing methodology";
Part 2: "Protocol Implementation Conformance Statement (PICS) pro forma";
Part 3: "Test Suite Structure and Test Purposes (TSS & TP)";
Part 4: "Abstract Test Suite (ATS) and Protocol Implementation eXtra Information for Testing (PIXIT)".
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI

---------------------- Page: 4 ----------------------
5 ETSI TS 103 268-2 V1.1.1 (2017-04)
1 Scope
The present document provides the Protocol Implementation Conformance Statement (PICS) pro forma for
Conformance test specifications for Smart Appliances testing as defined in ETSI TS 103 268-1 [6] and ETSI
TS 118 115 [8] in compliance with the relevant requirements and in accordance with the relevant guidance given in
ISO/IEC 9646-7 [7].
2 References
2.1 Normative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
Referenced documents which are not found to be publicly available in the expected location might be found at
https://docbox.etsi.org/Reference.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are necessary for the application of the present document.
[1] ETSI TS 103 264: "SmartM2M; Smart Appliances; Reference Ontology and oneM2M Mapping".
[2] ETSI TS 103 267: "SmartM2M; Smart Appliances; Communication Framework".
[3] ETSI TS 118 101: "oneM2M; Functional Architecture (oneM2M TS-0001)".
[4] ETSI TS 118 104: "oneM2M; Service Layer Core Protocol Specification (oneM2M TS-0004)".
[5] ETSI TS 118 112: "oneM2M; Base Ontology (oneM2M TS-0012)".
[6] ETSI TS 103 268-1: "SmartM2M; Smart Appliances Ontology and Communication Framework
Testing; Part 1: Testing methodology".
[7] ISO/IEC 9646-7: "Information technology - Open Systems Interconnection - Conformance testing
methodology and framework - Part 7: Implementation Conformance Statements".
[8] ETSI TS 118 115: "oneM2M; Testing Framework (oneM2M TS-0015)".
[9] ISO/IEC 9646-1: "Information technology - Open Systems Interconnection - Conformance testing
methodology and framework - Part 1: General concepts".
2.2 Informative references
References are either specific (identified by date of publication and/or edition number or version number) or
non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the
referenced document (including any amendments) applies.
NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee
their long term validity.
The following referenced documents are not necessary for the application of the present document but they assist the
user with regard to a particular subject area.
Not applicable.
ETSI

---------------------- Page: 5 ----------------------
6 ETSI TS 103 268-2 V1.1.1 (2017-04)
3 Definitions and abbreviations
3.1 Definitions
For the purposes of the present document, the terms and definitions given in ETSI TS 103 268-1 [6],
ISO/IEC 9646-1 [9] and ISO/IEC 9646-7 [7] apply.
3.2 Abbreviations
For the purposes of the present document, the abbreviations given in ETSI TS 103 268-1 [6], ETSI TS 103 264 [1],
ETSI TS 118 112 [5] and the following apply:
API Application Programming Interface
EUT Equipment Under Test
IFS Interoperable Features Statement
IUT Implementation Under Test
IWF InterWorking Function
PICS Protocol Implementation Conformance Statement
QE Qualified Equipment
RP Reference Point
SAP Smart Appliance
SUT System Under Test
TP Test Purpose
TSS Test Suite Structure
4 Conformance requirement concerning PICS
If it claims to conform to the present document, the actual PICS pro forma to be filled in by a supplier shall be
technically equivalent to the text of the PICS pro forma given in annex A, and shall preserve the numbering, naming
and ordering of the pro forma items.
An ICS which conforms to the present document shall be a conforming PICS pro forma completed in accordance with
the instructions for completion given in clause A.1.
ETSI

---------------------- Page: 6 ----------------------
7 ETSI TS 103 268-2 V1.1.1 (2017-04)
Annex A (normative):
Smart Appliances Testing PICS Pro forma
A.0 Foreword
Notwithstanding the provisions of the copyright clause related to the text of the present document, ETSI grants that
users of the present document may freely reproduce the Smart Appliances PICS pro forma in this annex so that it can be
used for its intended purposes and may further publish the completed Smart Appliances PICS.
A.1 Guidance for completing the ICS pro forma
A.1.1 Purposes and structure
The purpose of this ICS pro forma is to provide a mechanism whereby a supplier of an implementation of the
requirements defined in ETSI TS 118 101 [3] may provide information about the implementation in a standardized
manner. The ICS pro forma is subdivided into clauses for the following categories of information:
• guidance for completing the ICS pro forma;
• identification of the implementation;
• identification of the ETSI TS 118 101 [3];
• global statement of conformance;
• ICS pro forma tables.
A.1.2 Abbreviations and conventions
The ICS pro forma contained in this annex is comprised of information in tabular form in accordance with the
guidelines presented in ISO/IEC 9646-7 [7].
Item column
The item column contains a number which identifies the item in the table.
Item description column
The item description column describes in free text each respective item (e.g. parameters, timers, etc.). It implicitly
means "is supported by the implementation?".
Reference column
The reference column gives reference to the relevant clauses in core specifications.
Status column
The various status used in this annex are in accordance with the rules in table A.1.2-1.
ETSI

---------------------- Page: 7 ----------------------
8 ETSI TS 103 268-2 V1.1.1 (2017-04)
Table A.1.2-1: Key to status codes
Status code Status name Meaning
m mandatory The capability shall be supported. It is a static view of the fact that the
conformance requirements related to the capability in the reference
specification are mandatory requirements. This does not mean that a given
behaviour shall always be observed (this would be a dynamic view), but that it
shall be observed when the implementation is placed in conditions where the
conformance requirements from the reference specification compel it to do so.
For instance, if the support for a parameter in a sent PDU is mandatory, it does
not mean that it shall always be present, but that it shall be present according
to the description of the behaviour in the reference specification (dynamic
conformance requirement).
o optional The capability may or may not be supported. It is an implementation choice.
n/a not applicable It is impossible to use the capability. No answer in the support column is
required.
c. conditional The requirement on the capability ("m", "o", "n/a") depends on the support of
other optional or conditional items. is the identifier of the conditional
expression.
o. qualified optional For mutually exclusive or selectable options from a set. is the
identifier of the group of options, and the logic of selection of the options.

Mnemonic column
The Mnemonic column contains mnemonic identifiers for each item.
Support column
The support column shall be filled in by the supplier of the implementation. The following common notations, defined
in ISO/IEC 9646-7 [7], are used for the support column:
Y or y supported by the implementation
N or n not supported by the implementation
N/A, n/a or - no answer required (allowed only if the status is N/A, directly or after evaluation of a conditional
status)
References to items
For each possible item answer (answer in the support column) within the ICS pro forma there exists a unique reference,
used, for example, in the conditional expressions. It is defined as the table identifier, followed by a solidus character "/",
followed by the item number in the table.
EXAMPLE 1: A.5/4 is the reference to the answer of item 4 in table A.5.
EXAMPLE 2: A.6/3b is the reference to the second answer (i.e. in the second support column) of item 3 in
table 6 of annex A.
Values allowed column
The values allowed column contains the type, the list, the range, or the length of values allowed. The following
notations are used:
- range of values:  .
example: 5 . 20
- list of values: , , .,
example: 2 ,4 ,6 ,8, 9
example: '1101'B, '1011'B, '1111'B
example: '0A'H, '34'H, '2F'H
- list of named values: (), (), ., ()
example: reject(1), accept(2)
- length: size ( . )
ETSI

---------------------- Page: 8 ----------------------
9 ETSI TS 103 268-2 V1.1.1 (2017-04)
example: size (1 . 8)
Values supported column
The values supported column shall be filled in by the supplier of the implementation. In this column, the values or the
ranges of values supported by the implementation shall be indicated.
Prerequisite line
A prerequisite line takes the form: Prerequisite: .
A prerequisite line after a clause or table title indicates that the whole clause or the whole table is not required to be
completed if the predicate is FALSE.
A.1.3 Instructions for completing the ICS pro forma
The supplier of the implementation shall complete the ICS pro forma in each of the spaces provided. In particular, an
explicit answer shall be entered, in each of the support or supported column boxes provided, using the notation
described in clause A.1.2.
If necessary, the supplier may provide additional comments in space at the bottom of the tables or separately.
More detailed instructions are given at the beginning of the different clauses of the ICS pro forma.
A.2 Identification of the implementation
A.2.1 Introduction
Identification of the Implementation Under Test (IUT) and the system in which it resides (the System Under Test
(SUT)) should be filled in so as to provide as much detail as possible regarding version numbers and configuration
options.
The product supplier information and client information should both be filled in if they are different.
A person who can answer queries regarding information supplied in the ICS should be named as the contact person.
A.2.2 Date of the statement
.........................................................................................................................................................................................
A.2.3 Implementation Under Test (IUT) identification
IUT name:
.........................................................................................................................................................................................
.........................................................................................................................................................................................
IUT version:
.........................................................................................................................................................................................
.........................................................................................................................................................................................
ETSI

---------------------- Page: 9 ----------------------
10 ETSI TS 103 268-2 V1.1.1 (2017-04)
A.2.4 System Under Test (SUT) identification
SUT name:
.........................................................................................................................................................................................
.........................................................................................................................................................................................
Hardware configuration:
.........................................................................................................................................................................................
.........................................................................................................................................................................................
.........................................................................................................................................................................................
Operating system:
.........................................................................................................................................................................................
.........................................................................................................................................................................................
A.2.5 Product supplier
Name:
.........................................................................................................................................................................................
Address:
.........................................................................................................................................................................................
.........................................................................................................................................................................................
.........................................................................................................................................................................................
Telephone number:
.........................................................................................................................................................................................
Facsimile number:
.........................................................................................................................................................................................
E-mail address:
.........................................................................................................................................................................................
Additional information:
.........................................................................................................................................................................................
.........................................................................................................................................................................................
.........................................................................................................................................................................................
A.2.6 Client (if different from product supplier)
Name:
.........................................................................................................................................................................................
Address:
.........................................................................................................................................................................................
ETSI

---------------------- Page: 10 ----------------------
11 ETSI TS 103 268-2 V1.1.1 (2017-04)
.........................................................................................................................................................................................
.........................................................................................................................................................................................
Telephone number:
.........................................................................................................................................................................................
Facsimile number:
.........................................................................................................................................................................................
E-mail address:
.........................................................................................................................................................................................
Additional information:
.........................................................................................................................................................................................
.........................................................................................................................................................................................
A.2.7 ICS contact person
(A person to contact if there are any queries concerning the content of the ICS)
Name:
.........................................................................................................................................................................................
Telephone number:
.........................................................................................................................................................................................
Facsimile number:
.........................................................................................................................................................................................
E-mail address:
...........
...