ETSI ETS 300 176-1 ed.2 (1996-11)

Digital Enhanced Cordless Telecommunications (DECT); Approval test specification; Part 1: Radio

RE/RES-03028-1

Digitalne izboljšane brezvrvične telekomunikacije (DECT) - Specifikacija odobritvenega preskusa - 1. del: Radio

General Information

• Status: Published
• Publication Date: 03-Nov-1996
• Technical Committee: RES 3 - DECT
• Current Stage: 12 - Completion
• Due Date: 15-Nov-1996
• Completion Date: 04-Nov-1996
• Ref Project: SIST ETS 300 176-1:1999 - Digital Enhanced Cordless Telecommunications (DECT); Approval test specification; Part 1: Radio

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.LNDFLMDDigital Enhanced Cordless Telecommunications (DECT); Approval test specification; Part 1: Radio33.070.30'(&7Digital Enhanced Cordless Telecommunications (DECT)ICS:Ta slovenski standard je istoveten z:ETS 300 176-1 E23SIST ETS 300 176-1:199en01-GHFHPEHU-1993SIST ETS 300 176-1:199SLOVENSKI
STANDARD



SIST ETS 300 176-1:1999



EUROPEANETS 300 176-1TELECOMMUNICATIONNovember 1996STANDARDSecond EditionSource: ETSI TC-RESReference: RE/RES-03028-1ICS:33.020, 33.060.50Key words:DECT, radio, testing, type approvalRadio Equipment and Systems (RES);Digital Enhanced Cordless Telecommunications (DECT);Approval test specification;Part 1: RadioETSIEuropean Telecommunications Standards InstituteETSI SecretariatPostal address: F-06921 Sophia Antipolis CEDEX - FRANCEOffice address: 650 Route des Lucioles - Sophia Antipolis - Valbonne - FRANCEX.400: c=fr, a=atlas, p=etsi, s=secretariat - Internet: [e-mail].: [phone] - Fax: [phone]Copyright Notification: No part may be reproduced except as authorized by written permission. The copyright and theforegoing restriction extend to reproduction in all media.© European Telecommunications Standards Institute 1996. All rights reserved.SIST ETS 300 176-1:1999



Page 2ETS 300 176-1: November 1996Whilst every care has been taken in the preparation and publication of this document, errors in content,typographical or otherwise, may occur. If you have comments concerning its accuracy, please write to"ETSI Editing and Committee Support Dept." at the address shown on the title page.SIST ETS 300 176-1:1999



Page 3ETS 300 176-1: November 1996ContentsForeword.91Scope.112Normative references.123Definitions and abbreviations.133.1Definitions.133.2Abbreviations.154General.164.1Document layout.164.1.1Test suites.164.1.2Test groups.164.1.3Test cases.174.2Presentation of equipment for testing purposes.174.2.1Choice of model for type examination.174.2.2Description of equipment.184.2.2.1Protocol Implementation Conformance Statement (PICS).184.2.2.2Protocol Implementation eXtra Information for Testing(PIXIT).184.2.2.3Environmental test conditions.184.2.3Host connected equipment.184.2.4Applicant's declaration.184.3Applicability of type tests.184.3.1Equipment that includes only a DECT RF receiver.184.3.2Equipment that includes a radio transmitter.194.3.3Equipment that is equipped with an analogue port.194.3.4Equipment with a synchronization port.194.3.5Equipment incorporating the IPEI (PPs only).194.3.6All FP equipment.194.3.7PPs with direct PP to PP communication option.194.3.8Installation related issues.194.3.9Wireless relay stations.194.4Interpretation of the measurement results.205General test requirements.205.1Test philosophy.205.2Test site.215.2.1Open air test site.215.2.1.1Description.215.2.1.2Calibration.225.2.2Anechoic chamber.235.2.2.1General.235.2.2.2Description.235.2.2.3Influence of parasitic reflections.255.2.2.4Calibration and mode of use.255.2.3Stripline coupler.255.2.3.1Description.255.2.3.2Calibration.255.2.3.3Mode of use.265.3Standard position.265.4Test antenna of the LT.265.5Substitution antenna.265.6Test fixture.275.6.1Description.275.6.1.1Calibration of the test fixture for the measurement oftransmitter characteristics.27SIST ETS 300 176-1:1999



Page 4ETS 300 176-1: November 19965.6.1.2Calibration of the test fixture for the measurement ofreceiver characteristics.285.6.1.3Mode of use.285.6.2Equipment with a temporary or internal permanent antenna connector.295.6.2.1Equipment with a temporary antenna connector.295.7Indoor test site.295.7.1Description.295.7.2Test for parasitic reflections.305.7.3Calibration and mode of use.305.8Lower Tester (LT).315.8.1Description.315.8.2Connections between the EUT and the LT.315.8.3Functions and abilities.325.8.4Signal generation uncertainty.325.8.4.1Modulated DECT-like carrier.325.8.4.2CW interferers.325.8.4.3DECT RF Signal.325.8.4.4Test modulation signals.325.8.5Measurement uncertainty.335.9Upper Tester (UT).335.9.1Description of the UT.335.9.2The test standby mode.335.9.3Test messages.345.10Description of the lower tester FT and PT.345.11General test methods.345.11.1General.345.11.2Sampling the RF signal.355.11.2.1Introduction.355.11.2.2Sampling method.355.11.3Determining the reference position.355.11.3.1Case 1: EUTs that cannot transmit.355.11.3.2Case 2: EUTs that can transmit.355.11.4Bit error rate (BER) measurements.355.12Test setup.365.12.1Test setup 1.365.12.2Test setup 2.365.12.3Test setup 3.375.12.4Test setup 4.375.12.5Test setup 5.385.13Test arrangements for intermodulation measurements.385.13.1PT to PT arrangement.385.13.2FT to FT arrangement.395.13.3FT to PT arrangement.396Test conditions, power sources and ambient temperatures.406.1General.406.2Nominal test conditions.406.3Extreme test conditions.416.4Test power source - general requirements.426.5Nominal test power source.426.5.1Mains voltage.426.5.2Regulated lead acid battery power sources.426.5.3Nickel cadmium battery.426.5.4Other power sources.426.6Extreme test power source.426.6.1Mains voltage.426.6.2Regulated lead acid battery power sources.426.6.3Nickel cadmium battery.426.6.4Other power sources.436.7Testing of host connected equipment and plug-in cards.436.7.1Alternative A: composite equipment.436.7.2Alternative B: use of a test jig and three hosts.43SIST ETS 300 176-1:1999



Page 5ETS 300 176-1: November 19967Accuracy and stability of RF carriers.447.1Definition.447.2Test environment.447.3Method of measurement.447.4Verdict criteria when the EUT is a RFP.457.5Verdict criteria when the EUT is a PP.457.5.1Case 1: When the measurement is made during the first 1 s of the EUTgoing into a transmit mode from a non-transmitting mode.457.5.2Case 2: When the measurement is made at any other time.458Accuracy and stability of timing parameters.458.1Slot structure definitions.458.2Definition of the position of p0.468.3Measurement of packet timing jitter.468.3.1Test environment.468.3.2Method of measurement.478.3.3Verdict criteria.478.4Measurement of the reference timing accuracy of a RFP.478.4.1Test environment.478.4.2Method of measurement.478.4.3Verdict criteria.488.5Measurement of packet transmission accuracy of a PP.488.5.1Test environment.488.5.2Method of measurement.488.5.3Verdict criteria.499Transmission burst.499.1Definitions.499.1.1Physical packets.499.1.2Transmitted power.499.1.3Normal Transmitted Power (NTP).499.1.4Transmitter attack time.499.1.5Transmitter release time.499.1.6Minimum power.499.1.7Maximum power.509.1.8Maintenance of transmission after packet end.509.1.9Transmitter idle power output.509.2Test environment.509.3Method of measurement.509.4Verdict criteria.5110Transmitted power.5110.1Definitions.5110.1.1PP and RFP with an integral antenna.5110.1.2PP and RFP with external connections for all antennas.5110.1.3PP and RFP with both integral and external antennas.5210.2PP and RFP with an integral antenna.5210.2.1Test environment.5210.2.2Method of measurement.5210.2.2.1Measurement of NTP.5210.2.2.2Measurement of antenna gain.5310.2.3Verdict criteria for all EUTs.5310.3PP and RFP with external antenna connection(s).5410.3.1Test environment.5410.3.2Method of measurement.5410.3.3Verdict criteria for all EUTs.5411RF carrier modulation.5411.1Test environment.5411.2Method of measurement, Parts 1 and 2.5511.2.1Part 1.5511.2.2Part 2.5511.3Method of measurement, Parts 3 and 4.56SIST ETS 300 176-1:1999



Page 6ETS 300 176-1: November 199611.3.1Part 3.5611.3.2Part 4.5611.4Verdict criteria for Part 1.5611.5Verdict criteria for Part 2.5611.6Verdict criteria for Part 3.5611.7Verdict criteria for Part 4.5712Unwanted RF power radiation.5812.1General test conditions.5812.2Emissions due to modulation.5812.2.1Definition.5812.2.2Test environment.5812.2.3Method of measurement.5912.2.4Verdict criteria.5912.3Emissions due to transmitter transients.6012.3.1Definition.6012.3.2Test environment.6012.3.3Method of measurement.6012.3.4Verdict criteria.6112.4Emissions due to intermodulation.6112.4.1Definition.6112.4.2Test environment.6112.4.3Method of measurement.6212.4.4Verdict criteria.6212.5Spurious emissions when allocated a transmit channel.6312.5.1Definition.6312.5.2Radiated emissions.6312.5.2.1Test environment.6312.5.2.2Method of measurement.6312.5.2.3Verdict criteria.6412.5.3Conducted spurious emissions.6412.5.3.1Test environment.6412.5.3.2Method of measurement.6412.5.3.3Verdict criteria.6513Radio receiver testing.6513.1Radio receiver sensitivity.6513.1.1Definition.6513.1.2Test environment.6513.1.3Method of measurement.6513.1.4Verdict criteria.6613.2Radio receiver reference BER.6613.2.1Definition.6613.2.2Test environment.6613.2.3Method of measurement.6613.2.4Verdict criteria.6613.3Radio receiver interference performance.6713.3.1Definition.6713.3.2Test environment.6713.3.3Method of measurement.6713.3.4Verdict criteria.6713.4Radio receiver blocking case 1: owing to signals occurring at the same time but onother frequencies.6813.4.1Definition.6813.4.2Test environment.6813.4.3Method of measurement.6813.4.4Verdict criteria.6913.5Radio receiver blocking case 2: owing to signals occurring at a different time.6913.5.1Definition.6913.5.2Test environment.6913.5.3Method of measurement.7013.5.4Verdict criteria.7013.6Receiver intermodulation performance.70SIST ETS 300 176-1:1999



Page 7ETS 300 176-1: November 199613.6.1Definition.7013.6.2Test environment.7013.6.3Method of measurement.7113.6.4Verdict criteria.7113.7Spurious emissions when the PP has no allocated transmit channel.7113.7.1Definition.7113.7.2Test environment.7113.7.3Method of measurement.7213.7.4Verdict criteria (outside the DECT band).7213.7.5Verdict criteria (inside the DECT band).7214Synchronization port (FP only).7214.1Description.7214.2Test environment.7314.3FP as a master.
...

SLOVENSKI STANDARD
SIST ETS 300 176-1:1999
01-julij-1999
'LJLWDOQHL]EROMãDQHEUH]YUYLþQHWHOHNRPXQLNDFLMH'(&76SHFLILNDFLMD
RGREULWYHQHJDSUHVNXVDGHO5DGLR
Digital Enhanced Cordless Telecommunications (DECT); Approval test specification;
Part 1: Radio
Ta slovenski standard je istoveten z: ETS 300 176-1 Edition 2
ICS:
33.070.30 'LJLWDOQHL]EROMãDQH Digital Enhanced Cordless
EUH]YUYLþQHWHOHNRPXQLNDFLMH Telecommunications (DECT)
'(&7
SIST ETS 300 176-1:1999 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST ETS 300 176-1:1999

---------------------- Page: 2 ----------------------

SIST ETS 300 176-1:1999
EUROPEAN ETS 300 176-1
TELECOMMUNICATION November 1996
STANDARD Second Edition
Source: ETSI TC-RES Reference: RE/RES-03028-1
ICS: 33.020, 33.060.50
Key words: DECT, radio, testing, type approval
Radio Equipment and Systems (RES);
Digital Enhanced Cordless Telecommunications (DECT);
Approval test specification;
Part 1: Radio
ETSI
European Telecommunications Standards Institute
ETSI Secretariat
Postal address: F-06921 Sophia Antipolis CEDEX - FRANCE
Office address: 650 Route des Lucioles - Sophia Antipolis - Valbonne - FRANCE
X.400: c=fr, a=atlas, p=etsi, s=secretariat - Internet: [e-mail]
Tel.: [phone] - Fax: [phone]
Copyright Notification: No part may be reproduced except as authorized by written permission. The copyright and the
foregoing restriction extend to reproduction in all media.
© European Telecommunications Standards Institute 1996. All rights reserved.

---------------------- Page: 3 ----------------------

SIST ETS 300 176-1:1999
Page 2
ETS 300 176-1: November 1996
Whilst every care has been taken in the preparation and publication of this document, errors in content,
typographical or otherwise, may occur. If you have comments concerning its accuracy, please write to
"ETSI Editing and Committee Support Dept." at the address shown on the title page.

---------------------- Page: 4 ----------------------

SIST ETS 300 176-1:1999
Page 3
ETS 300 176-1: November 1996
Contents
Foreword .9
1 Scope .11
2 Normative references.12
3 Definitions and abbreviations .13
3.1 Definitions .13
3.2 Abbreviations .15
4 General.16
4.1 Document layout.16
4.1.1 Test suites.16
4.1.2 Test groups .16
4.1.3 Test cases.17
4.2 Presentation of equipment for testing purposes .17
4.2.1 Choice of model for type examination.17
4.2.2 Description of equipment.18
4.2.2.1 Protocol Implementation Conformance Statement (PICS).18
4.2.2.2 Protocol Implementation eXtra Information for Testing
(PIXIT) .18
4.2.2.3 Environmental test conditions.18
4.2.3 Host connected equipment.18
4.2.4 Applicant's declaration.18
4.3 Applicability of type tests.18
4.3.1 Equipment that includes only a DECT RF receiver.18
4.3.2 Equipment that includes a radio transmitter.19
4.3.3 Equipment that is equipped with an analogue port .19
4.3.4 Equipment with a synchronization port.19
4.3.5 Equipment incorporating the IPEI (PPs only) .19
4.3.6 All FP equipment .19
4.3.7 PPs with direct PP to PP communication option.19
4.3.8 Installation related issues .19
4.3.9 Wireless relay stations .19
4.4 Interpretation of the measurement results.20
5 General test requirements.20
5.1 Test philosophy.20
5.2 Test site .21
5.2.1 Open air test site .21
5.2.1.1 Description.21
5.2.1.2 Calibration.22
5.2.2 Anechoic chamber.23
5.2.2.1 General.23
5.2.2.2 Description.23
5.2.2.3 Influence of parasitic reflections .25
5.2.2.4 Calibration and mode of use.25
5.2.3 Stripline coupler.25
5.2.3.1 Description.25
5.2.3.2 Calibration.25
5.2.3.3 Mode of use.26
5.3 Standard position.26
5.4 Test antenna of the LT.26
5.5 Substitution antenna .26
5.6 Test fixture .27
5.6.1 Description .27
5.6.1.1 Calibration of the test fixture for the measurement of
transmitter characteristics.27

---------------------- Page: 5 ----------------------

SIST ETS 300 176-1:1999
Page 4
ETS 300 176-1: November 1996
5.6.1.2 Calibration of the test fixture for the measurement of
receiver characteristics . 28
5.6.1.3 Mode of use . 28
5.6.2 Equipment with a temporary or internal permanent antenna connector. 29
5.6.2.1 Equipment with a temporary antenna connector . 29
5.7 Indoor test site. 29
5.7.1 Description. 29
5.7.2 Test for parasitic reflections. 30
5.7.3 Calibration and mode of use. 30
5.8 Lower Tester (LT). 31
5.8.1 Description. 31
5.8.2 Connections between the EUT and the LT. 31
5.8.3 Functions and abilities . 32
5.8.4 Signal generation uncertainty . 32
5.8.4.1 Modulated DECT-like carrier. 32
5.8.4.2 CW interferers. 32
5.8.4.3 DECT RF Signal. 32
5.8.4.4 Test modulation signals . 32
5.8.5 Measurement uncertainty . 33
5.9 Upper Tester (UT). 33
5.9.1 Description of the UT. 33
5.9.2 The test standby mode . 33
5.9.3 Test messages . 34
5.10 Description of the lower tester FT and PT. 34
5.11 General test methods.34
5.11.1 General . 34
5.11.2 Sampling the RF signal. 35
5.11.2.1 Introduction . 35
5.11.2.2 Sampling method . 35
5.11.3 Determining the reference position. 35
5.11.3.1 Case 1: EUTs that cannot transmit. 35
5.11.3.2 Case 2: EUTs that can transmit. 35
5.11.4 Bit error rate (BER) measurements. 35
5.12 Test setup . 36
5.12.1 Test setup 1. 36
5.12.2 Test setup 2. 36
5.12.3 Test setup 3. 37
5.12.4 Test setup 4. 37
5.12.5 Test setup 5. 38
5.13 Test arrangements for intermodulation measurements. 38
5.13.1 PT to PT arrangement . 38
5.13.2 FT to FT arrangement . 39
5.13.3 FT to PT arrangement . 39
6 Test conditions, power sources and ambient temperatures. 40
6.1 General. 40
6.2 Nominal test conditions . 40
6.3 Extreme test conditions. 41
6.4 Test power source - general requirements . 42
6.5 Nominal test power source. 42
6.5.1 Mains voltage. 42
6.5.2 Regulated lead acid battery power sources. 42
6.5.3 Nickel cadmium battery . 42
6.5.4 Other power sources . 42
6.6 Extreme test power source . 42
6.6.1 Mains voltage. 42
6.6.2 Regulated lead acid battery power sources. 42
6.6.3 Nickel cadmium battery . 42
6.6.4 Other power sources . 43
6.7 Testing of host connected equipment and plug-in cards . 43
6.7.1 Alternative A: composite equipment . 43
6.7.2 Alternative B: use of a test jig and three hosts . 43

---------------------- Page: 6 ----------------------

SIST ETS 300 176-1:1999
Page 5
ETS 300 176-1: November 1996
7 Accuracy and stability of RF carriers.44
7.1 Definition.44
7.2 Test environment .44
7.3 Method of measurement.44
7.4 Verdict criteria when the EUT is a RFP .45
7.5 Verdict criteria when the EUT is a PP.45
7.5.1 Case 1: When the measurement is made during the first 1 s of the EUT
going into a transmit mode from a non-transmitting mode.45
7.5.2 Case 2: When the measurement is made at any other time.45
8 Accuracy and stability of timing parameters.45
8.1 Slot structure definitions.45
8.2 Definition of the position of p0.46
8.3 Measurement of packet timing jitter.46
8.3.1 Test environment.46
8.3.2 Method of measurement .47
8.3.3 Verdict criteria .47
8.4 Measurement of the reference timing accuracy of a RFP .47
8.4.1 Test environment.47
8.4.2 Method of measurement .47
8.4.3 Verdict criteria .48
8.5 Measurement of packet transmission accuracy of a PP.48
8.5.1 Test environment.48
8.5.2 Method of measurement .48
8.5.3 Verdict criteria .49
9 Transmission burst.49
9.1 Definitions .49
9.1.1 Physical packets.49
9.1.2 Transmitted power.49
9.1.3 Normal Transmitted Power (NTP).49
9.1.4 Transmitter attack time.49
9.1.5 Transmitter release time .49
9.1.6 Minimum power.49
9.1.7 Maximum power.50
9.1.8 Maintenance of transmission after packet end.50
9.1.9 Transmitter idle power output.50
9.2 Test environment .50
9.3 Method of measurement.50
9.4 Verdict criteria.51
10 Transmitted power .51
10.1 Definitions .51
10.1.1 PP and RFP with an integral antenna .51
10.1.2 PP and RFP with external connections for all antennas .51
10.1.3 PP and RFP with both integral and external antennas.52
10.2 PP and RFP with an integral antenna.52
10.2.1 Test environment.52
10.2.2 Method of measurement .52
10.2.2.1 Measurement of NTP .52
10.2.2.2 Measurement of antenna gain.53
10.2.3 Verdict criteria for all EUTs.53
10.3 PP and RFP with external antenna connection(s) .54
10.3.1 Test environment.54
10.3.2 Method of measurement .54
10.3.3 Verdict criteria for all EUTs.54
11 RF carrier modulation.54
11.1 Test environment .54
11.2 Method of measurement, Parts 1 and 2 .55
11.2.1 Part 1.55
11.2.2 Part 2.55
11.3 Method of measurement, Parts 3 and 4 .56

---------------------- Page: 7 ----------------------

SIST ETS 300 176-1:1999
Page 6
ETS 300 176-1: November 1996
11.3.1 Part 3 . 56
11.3.2 Part 4 . 56
11.4 Verdict criteria for Part 1 . 56
11.5 Verdict criteria for Part 2 . 56
11.6 Verdict criteria for Part 3 . 56
11.7 Verdict criteria for Part 4 . 57
12 Unwanted RF power radiation . 58
12.1 General test conditions. 58
12.2 Emissions due to modulation . 58
12.2.1 Definition. 58
12.2.2 Test environment. 58
12.2.3 Method of measurement. 59
12.2.4 Verdict criteria. 59
12.3 Emissions due to transmitter transients . 60
12.3.1 Definition. 60
12.3.2 Test environment. 60
12.3.3 Method of measurement. 60
12.3.4 Verdict criteria. 61
12.4 Emissions due to intermodulation . 61
12.4.1 Definition. 61
12.4.2 Test environment. 61
12.4.3 Method of measurement. 62
12.4.4 Verdict criteria. 62
12.5 Spurious emissions when allocated a transmit channel. 63
12.5.1 Definition. 63
12.5.2 Radiated emissions . 63
12.5.2.1 Test environment . 63
12.5.2.2 Method of measurement. 63
12.5.2.3 Verdict criteria . 64
12.5.3 Conducted spurious emissions. 64
12.5.3.1 Test environment . 64
12.5.3.2 Method of measurement. 64
12.5.3.3 Verdict criteria . 65
13 Radio receiver testing. 65
13.1 Radio receiver sensitivity. 65
13.1.1 Definition. 65
13.1.2 Test environment. 65
13.1.3 Method of measurement. 65
13.1.4 Verdict criteria. 66
13.2 Radio receiver reference BER . 66
13.2.1 Definition. 66
13.2.2 Test environment. 66
13.2.3 Method of measurement. 66
13.2.4 Verdict criteria. 66
13.3 Radio receiver interference performance. 67
13.3.1 Definition. 67
13.3.2 Test environment. 67
13.3.3 Method of measurement. 67
13.3.4 Verdict criteria. 67
13.4 Radio receiver blocking case 1: owing to signals occurring at the same time but on
other frequencies . 68
13.4.1 Definition. 68
13.4.2 Test environment. 68
13.4.3 Method of measurement. 68
13.4.4 Verdict criteria. 69
13.5 Radio receiver blocking case 2: owing to signals occurring at a different time. 69
13.5.1 Definition. 69
13.5.2 Test environment. 69
13.5.3 Method of measurement. 70
13.5.4 Verdict criteria. 70
13.6 Receiver intermodulation performance . 70

---------------------- Page: 8 ----------------------

SIST ETS 300 176-1:1999
Page 7
ETS 300 176-1: November 1996
13.6.1 Definition .70
13.6.2 Test environment.70
13.6.3 Method of measurem
...