LTE; Evolved Universal Terrestrial Radio Access (E-UTRA) and Evolved Universal Terrestrial Radio Access Network (E-UTRAN); Overall description; Stage 2 (3GPP TS 36.300 version 14.11.0 Release 14)

RTS/TSGR-0236300veb0

General Information

Status
Published
Publication Date
14-Oct-2019
Current Stage
12 - Completion
Completion Date
15-Oct-2019
Ref Project

Buy Standard

Standard
ETSI TS 136 300 V14.11.0 (2019-10) - LTE; Evolved Universal Terrestrial Radio Access (E-UTRA) and Evolved Universal Terrestrial Radio Access Network (E-UTRAN); Overall description; Stage 2 (3GPP TS 36.300 version 14.11.0 Release 14)
English language
343 pages
sale 15% off
Preview
sale 15% off
Preview

Standards Content (Sample)

ETSI TS 136 300 V14.11.0 (2019-10)






TECHNICAL SPECIFICATION
LTE;
Evolved Universal Terrestrial Radio Access (E-UTRA)
and Evolved Universal Terrestrial
Radio Access Network (E-UTRAN);
Overall description;
Stage 2
(3GPP TS 36.300 version 14.11.0 Release 14)

---------------------- Page: 1 ----------------------
3GPP TS 36.300 version 14.11.0 Release 14 1 ETSI TS 136 300 V14.11.0 (2019-10)



Reference
RTS/TSGR-0236300veb0
Keywords
LTE
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: +33 4 92 94 42 00  Fax: +33 4 93 65 47 16

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
and microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.

© ETSI 2019.
All rights reserved.

DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its Members.

3GPP™ and LTE™ are trademarks of ETSI registered for the benefit of its Members and
of the 3GPP Organizational Partners.
oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and
of the oneM2M Partners.
®
GSM and the GSM logo are trademarks registered and owned by the GSM Association.
ETSI

---------------------- Page: 2 ----------------------
3GPP TS 36.300 version 14.11.0 Release 14 2 ETSI TS 136 300 V14.11.0 (2019-10)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (https://ipr.etsi.org/).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
Legal Notice
This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP).
The present document may refer to technical specifications or reports using their 3GPP identities. These shall be
interpreted as being references to the corresponding ETSI deliverables.
The cross reference between 3GPP and ETSI identities can be found under http://webapp.etsi.org/key/queryform.asp.
Modal verbs terminology
In the present document "shall", "shall not", "should", "should not", "may", "need not", "will", "will not", "can" and
"cannot" are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of
provisions).
"must" and "must not" are NOT allowed in ETSI deliverables except when used in direct citation.
ETSI

---------------------- Page: 3 ----------------------
3GPP TS 36.300 version 14.11.0 Release 14 3 ETSI TS 136 300 V14.11.0 (2019-10)
Contents
Intellectual Property Rights . 2
Legal Notice . 2
Modal verbs terminology . 2
Foreword . 16
1 Scope . 17
2 References . 17
3 Definitions, symbols and abbreviations . 20
3.1 Definitions . 20
3.2 Abbreviations . 22
4 Overall architecture . 27
4.1 Functional Split . 28
4.2 Void . 30
4.2.1 Void . 30
4.2.2 Void . 30
4.3 Radio Protocol architecture . 30
4.3.1 User plane . 30
4.3.2 Control plane . 31
4.4 Synchronization . 32
4.5 IP fragmentation . 32
4.6 Support of HeNBs . 32
4.6.1 Architecture . 32
4.6.2 Functional Split . 34
4.6.3 Interfaces. 36
4.6.3.1 Protocol Stack for S1 User Plane . 36
4.6.3.2 Protocol Stacks for S1 Control Plane . 37
4.6.3.3 Protocol Stack for S5 interface. 38
4.6.3.4 Protocol Stack for SGi interface . 38
4.6.3.5 Protocol Stack for X2 User Plane and X2 Control Plane . 38
4.6.4 Void . 38
4.6.5 Support of LIPA with HeNB . 38
4.6.6 Support of X2 GW . 40
4.6.6.1 Enhanced TNL Address Discovery . 41
4.6.6.2 Routing of X2AP messages . 41
4.6.6.3 (H)eNB unavailability . 41
4.6.6.4 (H)eNB registration . 41
4.7 Support for relaying. 41
4.7.1 General . 41
4.7.2 Architecture . 42
4.7.3 S1 and X2 user plane aspects . 42
4.7.4 S1 and X2 control plane aspects . 43
4.7.5 Radio protocol aspects . 44
4.7.6 Signalling procedures . 45
4.7.6.1 RN attach procedure . 45
4.7.6.2 E-RAB activation/modification. 46
4.7.6.3 RN startup procedure . 46
4.7.6.4 RN detach procedure . 47
4.7.6.5 Neighbouring Information Transfer . 48
4.7.6.6 Mobility to or from RN . 48
4.7.7 Relay Node OAM Aspects . 48
4.7.7.1 Architecture . 48
4.7.7.2 OAM Traffic QoS Requirements . 49
4.7.7.3 Security Aspects . 49
4.7.7.4 Void. 49
4.7.7.5 OAM Requirements for Configuration Parameters . 49
ETSI

---------------------- Page: 4 ----------------------
3GPP TS 36.300 version 14.11.0 Release 14 4 ETSI TS 136 300 V14.11.0 (2019-10)
4.7.7.5.1 Parameters Associated with Relay Bearer Mapping . 49
4.8 Support of SIPTO at the Local Network . 49
4.8.1 General . 49
4.8.2 SIPTO at the Local Network with collocated L-GW . 50
4.8.3 Support for SIPTO@LN with Stand-Alone Gateway . 51
4.9 Support for Dual Connectivity . 51
4.9.1 General . 51
4.9.2 Radio Protocol Architecture . 51
4.9.3 Network Interfaces . 52
4.9.3.1 E-UTRAN Control Plane for Dual Connectivity . 52
4.9.3.2 E-UTRAN User Plane for Dual Connectivity . 52
4.9.3.3 Support of HeNBs for Dual Connectivity . 53
4.9.3.4 Support of SIPTO@LN and LIPA for Dual Connectivity . 53
4.10 NB-IoT . 55
5 Physical Layer for E-UTRA . 55
5.1 Downlink Transmission Scheme . 58
5.1.1 Basic transmission scheme based on OFDM . 58
5.1.1a Basic transmission scheme based on OFDM for NB-IoT . 58
5.1.2 Physical-layer processing . 58
5.1.3 Physical downlink control channels . 59
5.1.4 Downlink Reference signal and synchronization signals . 60
5.1.4a Downlink Reference signal and synchronization signals for NB-IoT . 60
5.1.5 Downlink multi-antenna transmission . 60
5.1.5a Downlink multi-antenna transmission for NB-IoT . 61
5.1.6 MBSFN transmission . 61
5.1.7 Physical layer procedure . 61
5.1.7.1 Link adaptation . 61
5.1.7.2 Power Control . 61
5.1.7.3 Cell search . 61
5.1.7.3a Cell search for NB-IoT . 61
5.1.8 Physical layer measurements definition . 62
5.1.9 Coordinated Multi-Point transmission . 62
5.2 Uplink Transmission Scheme . 62
5.2.1 Basic transmission scheme . 62
5.2.1a Basic transmission scheme for NB-IoT . 63
5.2.2 Physical-layer processing . 63
5.2.3 Physical uplink control channel . 63
5.2.3a Uplink control information for NB-IoT . 64
5.2.4 Uplink Reference signal . 64
5.2.4a Uplink Reference signal for NB-IoT . 64
5.2.5 Random access preamble . 65
5.2.5a Random access preamble for NB-IoT . 65
5.2.6 Uplink multi-antenna transmission . 65
5.2.7 Physical channel procedure. 65
5.2.7.1 Link adaptation . 65
5.2.7.2 Uplink Power control . 65
5.2.7.3 Uplink timing control . 66
5.2.8 Coordinated Multi-Point reception . 66
5.3 Transport Channels. 66
5.3.1 Mapping between transport channels and physical channels . 67
5.3.1a Mapping between transport channels and narrowband physical channels . 68
5.4 E-UTRA physical layer model . 69
5.4.1 Void . 69
5.4.2 Void . 69
5.5 Carrier Aggregation . 69
5.5.1 SRS switching between component carriers . 70
5.5a Multi-carrier operation for NB-IoT . 70
5.6 Sidelink . 71
5.6.1 Basic transmission scheme . 71
5.6.2 Physical-layer processing . 71
5.6.3 Physical Sidelink control channel . 71
ETSI

---------------------- Page: 5 ----------------------
3GPP TS 36.300 version 14.11.0 Release 14 5 ETSI TS 136 300 V14.11.0 (2019-10)
5.6.4 Sidelink reference signals . 71
5.6.5 Physical channel procedure. 71
5.6.5.1 Sidelink power control . 71
5.6.6 Physical layer measurements definition . 71
5.7 Licensed-Assisted Access . 72
5.7.1 Channel Access Priority Classes . 72
5.7.2 Multiplexing of data. 72
6 Layer 2 . 73
6.1 MAC Sublayer . 75
6.1.1 Services and Functions . 75
6.1.2 Logical Channels . 75
6.1.2.1 Control Channels . 75
6.1.2.2 Traffic Channels . 76
6.1.3 Mapping between logical channels and transport channels . 76
6.1.3.1 Mapping in Uplink . 76
6.1.3.2 Mapping in Downlink . 77
6.1.3.3 Mapping in Sidelink . 78
6.2 RLC Sublayer . 78
6.2.1 Services and Functions . 78
6.2.2 PDU Structure . 78
6.3 PDCP Sublayer . 79
6.3.1 Services and Functions . 79
6.3.2 PDU Structure . 80
6.4 Carrier Aggregation . 80
6.5 Dual Connectivity. 81
7 RRC . 83
7.1 Services and Functions . 83
7.2 RRC protocol states & state transitions . 83
7.3 Transport of NAS messages . 84
7.3a CIoT signalling reduction optimizations . 85
7.3a.1 General . 85
7.3a.2 Control Plane CIoT EPS optimizations . 85
7.3a.3 User Plane CIoT EPS optimizations . 86
7.4 System Information . 88
7.5 Carrier Aggregation . 90
7.6 Dual Connectivity. 91
8 E-UTRAN identities . 92
8.1 E-UTRAN related UE identities . 92
8.2 Network entity related Identities . 93
8.3 Sidelink communication and V2X Sidelink Communication related identities . 93
8.4 MBMS related identities . 94
9 ARQ and HARQ .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.