ETSI EN 302 217-1 V3.3.1 (2021-10)
Fixed Radio Systems; Characteristics and requirements for point-to-point equipment and antennas; Part 1: Overview, common characteristics and requirements not related to access to radio spectrum
Fixed Radio Systems; Characteristics and requirements for point-to-point equipment and antennas; Part 1: Overview, common characteristics and requirements not related to access to radio spectrum
REN/ATTM-0449
Fiksni radijski sistemi - Karakteristike in zahteve za opremo tipa točka-točka in antene - 1. del: Pregled, splošne karakteristike in zahteve, ki niso povezane z dostopom do radijskega spektra
General Information
Buy Standard
Standards Content (Sample)
ETSI EN 302 217-1 V3.3.1 (2021-10)
EUROPEAN STANDARD
Fixed Radio Systems;
Characteristics and requirements for
point-to-point equipment and antennas;
Part 1: Overview, common characteristics and
requirements not related to access to radio spectrum
---------------------- Page: 1 ----------------------
2 ETSI EN 302 217-1 V3.3.1 (2021-10)
Reference
REN/ATTM-0449
Keywords
antenna, DFRS, DRRS, FWA, point-to-point, radio,
transmission
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.
Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2021.
All rights reserved.
ETSI
---------------------- Page: 2 ----------------------
3 ETSI EN 302 217-1 V3.3.1 (2021-10)
Contents
Intellectual Property Rights . 7
Foreword . 7
Modal verbs terminology . 8
1 Scope . 9
2 References . 9
2.1 Normative references . 9
2.2 Informative references . 11
3 Definition of terms, symbols and abbreviations . 14
3.1 Terms . 14
3.2 Symbols . 20
3.3 Abbreviations . 20
4 Structure and applicability of the ETSI EN 302 217 series . 23
4.1 Generality . 23
4.2 Cross references to previously relevant ENs and TSs . 24
4.3 Summary of system options provided . 24
4.4 User's guide . 28
5 General characteristics . 30
5.1 Frequency bands and channel arrangements . 30
5.2 Special compatibility requirements between systems . 30
5.3 Transmission capacity and spectral efficiency . 30
5.4 Performance and availability requirements . 30
5.5 Environmental profiles . 31
5.5.0 Introduction. 31
5.5.1 Environmental profile under Directive 2014/53/EU . 31
5.5.2 ETSI standardized environmental profiles . 31
5.5.2.0 Generality . 31
5.5.2.1 Equipment intended for telecommunications applications installed in weather-protected locations
(indoor locations) . 32
5.5.2.2 Equipment intended for telecommunications applications installed in not-weather-protected
locations (outdoor locations) . 32
5.5.3 Test environment profiles . 32
5.6 Power supply . 32
5.6.0 Introduction. 32
5.6.1 Power supply profile under Directive 2014/53/EU . 32
5.6.2 ETSI power supply profile . 32
5.7 System block diagram . 32
6 Baseband interfaces and parameters . 33
6.0 Introduction . 33
6.1 Ethernet interfaces . 33
6.2 Plesiochronous interfaces . 33
6.3 Synchronous digital hierarchy interfaces . 34
6.4 Other baseband data interfaces . 34
7 Main requirements . 34
7.0 Introduction . 34
7.1 General requirements . 34
7.1.1 System identification . 34
7.1.2 System nominal loading . 35
7.1.3 Environmental profile . 35
7.2 Transmitter characteristics. 35
7.2.1 Transmitter power and power tolerance . 35
7.2.1.1 Transmitter maximum power and EIRP . 35
7.2.1.2 Transmitter combined output power and EIRP limits . 35
ETSI
---------------------- Page: 3 ----------------------
4 ETSI EN 302 217-1 V3.3.1 (2021-10)
7.2.1.3 Transmitter output power environmental variation . 35
7.2.2 Transmitter power and frequency control . 36
7.2.2.1 Transmitter Power and Frequency Control (ATPC, RTPC and RFC) . 36
7.2.2.1.1 Automatic Transmit Power Control (ATPC) . 36
7.2.2.1.2 Remote Transmit Power Control (RTPC) . 37
7.2.2.1.3 Transmitter Remote Frequency Control (RFC) . 37
7.2.3 Transmitter Radio Frequency spectrum mask. 37
7.2.4 Transmitter discrete CW components exceeding the spectrum mask limit . 37
7.2.4.1 Transmitter discrete CW components at the symbol rate . 37
7.2.4.2 Transmitter other discrete CW components exceeding the spectrum mask limit . 37
7.2.5 Transmitter unwanted emissions in the spurious domain . 37
7.2.6 Transmitter dynamic change of modulation order . 37
7.2.7 Transmitter radio frequency tolerance . 37
7.2.8 Transmitter emission limitations outside the allocated band . 38
7.3 Receiver characteristics . 38
7.3.1 Unwanted emissions in the spurious domain . 38
7.3.2 Receiver BER as a function of Receiver Signal Level (RSL) . 38
7.3.3 Receiver selectivity . 38
7.3.3.1 Introduction . 38
7.3.3.2 Receiver co-channel, first and second adjacent channel interference sensitivity . 38
7.3.3.3 Blocking (CW spurious interference sensitivity) . 38
7.4 Antenna directional characteristics . 38
8 Complementary requirements . 39
8.0 Introduction . 39
8.1 Branching/feeder requirements . 39
8.1.1 Waveguide flanges (or other connectors) . 39
8.1.2 Return loss of feeder/antenna systems at equipment antenna port (C/C' reference point) . 40
8.2 Intermodulation products . 41
8.3 Transmitter characteristics. 41
8.3.1 Unwanted emissions - internal . 41
8.3.2 Transmitter Radio Frequency (RF) spectrum mask when mixed manufacturer compatibility is
required . 41
8.4 Receiver characteristics . 42
8.4.1 Receiver maximum input level and input level range . 42
8.4.2 Unwanted emissions - internal . 43
8.4.3 Image rejection . 43
8.4.4 Innermost channel selectivity . 44
8.5 System performance without diversity . 44
8.5.1 Equipment Residual BER (RBER) . 44
8.5.2 Distortion sensitivity . 46
8.5.2.1 Introduction . 46
8.5.2.2 Requirement . 46
8.5.2.3 Assessment . 48
8.5.3 Interference sensitivity for CCDP with XPIC operation . 48
8.5.3.1 General . 48
8.5.3.2 Co-channel "internal" interference sensitivity in flat fading conditions . 48
8.6 System characteristics with diversity . 49
8.6.0 Introduction. 49
8.6.1 Differential delay compensation . 49
8.6.2 BER performance . 49
Annex A (normative): Transmitter Radio Frequency spectrum masks and receiver
selectivity when mixed manufacturer compatibility is required . 50
A.0 Introduction . 50
A.1 Transmitter Radio Frequency masks assessment . 51
A.2 Normal channels - Emission mask floor . 51
A.2.1 RBER impact . 51
A.2.2 Local TX to RX compatibility . 51
A.2.2.1 Spectrum mask . 51
ETSI
---------------------- Page: 4 ----------------------
5 ETSI EN 302 217-1 V3.3.1 (2021-10)
A.2.2.2 Receiver selectivity . 52
A.3 Innermost channels for channel arrangements from about 4 GHz to about 8,5 GHz with channel
separation of 28 MHz to 30 MHz . 52
A.3.0 Introduction . 52
A.3.1 Innermost channels spectrum masks . 52
A.3.2 Receiver innermost channel selectivity . 54
A.4 Innermost channels for channel arrangements from about 4 GHz to 11 GHz with channel
separation of 40 MHz . 55
A.4.0 Introduction . 55
A.4.1 Innermost channels spectrum masks . 55
A.4.2 Receiver innermost channels selectivity . 56
A.5 Innermost channels for 18 GHz channel arrangements with channel separation of 55 MHz . 57
A.5.0 Introduction . 57
A.5.1 Innermost channels spectrum masks . 57
A.5.2 Receiver innermost channels selectivity . 58
Annex B (normative): Definition of equivalent data rates for packet data, PDH/SDH and
other signals on the traffic interface. 60
Annex C (informative): Information on Multi-channel and Channels-aggregation differences
and operation . 61
C.1 Multi-channel and Channels-aggregation (two channel case) . 61
C.2 Channels-aggregation (more than two channels case) . 62
Annex D (informative): Additional information on relevant characteristics and operation . 65
D.1 Residual Bit Error Ratio (RBER) and Residual Frame Error Ratio (RFER) . 65
D.2 Measurement test set for XPI characteristics . 66
D.3 Differential delay compensation range . 67
D.4 FER/BER equivalence and FER performance measurement equipment settings (example) . 68
D.4.1 FER/BER equivalence . 68
D.4.2 FER equipment settings and measurement techniques (example) . 69
D.5 Impact of power control (ATPC and/or RTPC), mixed-mode and bandwidth adaptive operation
on spectrum mask and link design requirements . 69
D.5.0 Introduction . 69
D.5.1 ATPC and RTPC . 69
D.5.1.1 ATPC . 69
D.5.1.2 ATPC and RTPC implementation background . 70
D.5.2 Mixed−mode and bandwidth adaptive operation impact . 72
D.5.2.1 Mixed−mode basic concepts . 72
D.5.2.2 Bandwidth adaptive . 73
D.5.2.2.1 Basic concepts . 73
D.5.2.2.2 Bandwidth (channel) occupancy . 73
D.5.3 Impact on frequency co ordination . 73
D.5.4 Impact of operating conditions on the access to radio spectrum through European Harmonised Standard . 73
D.6 Typical interference sensitivity behaviour for frequency planning purpose . 74
D.7 Band and Carrier Aggregation (BCA) operation . 74
Annex E (informative): Mechanical characteristics . 76
Annex F (informative): Mitigation techniques referred in CEPT/ERC/DEC(00)07
(18 GHz band) . 77
Annex G (informative): Bibliography . 78
ETSI
---------------------- Page: 5 ----------------------
6 ETSI EN 302 217-1 V3.3.1 (2021-10)
Annex H (informative): Change history . 79
History . 80
ETSI
---------------------- Page: 6 ----------------------
7 ETSI EN 302 217-1 V3.3.1 (2021-10)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The declarations
pertaining to these essential IPRs, if any, are publicly available for ETSI members and non-members, and can be
found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to
ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the
ETSI Web server (https://ipr.etsi.org/).
Pursuant to the ETSI Directives including the ETSI IPR Policy, no investigation regarding the essentiality of IPRs,
including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not
referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become,
essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its
Members. 3GPP™ and LTE™ are trademarks of ETSI registered for the benefit of its Members and of the 3GPP
Organizational Partners. oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and of the
®
oneM2M Partners. GSM and the GSM logo are trademarks registered and owned by the GSM Association.
Foreword
This European Standard (EN) has been produced by ETSI Technical Committee Access, Terminals, Transmission and
Multiplexing (ATTM).
The present document is part 1 of a multi-part deliverable covering the Fixed Radio Systems; Characteristics and
requirements for point-to-point equipment and antennas, as identified below (see note):
Part 1: "Overview, common characteristics and requirements not related to access to radio spectrum";
Part 2: "Digital systems operating in frequency bands from 1 GHz to 86 GHz; Harmonised Standard for access to
radio spectrum";
Part 4: "Antennas".
NOTE: In previous regulatory regime under Directive 1999/5/EC more parts (harmonised and non-harmonised
standards) were published. Since Directive 2014/53/EU [i.1] repealed Directive 1999/5/EC the following
parts have been replaced while the content has been moved to other parts of the series.
Those parts are:
Part 2-1: Tec
...
SLOVENSKI STANDARD
SIST EN 302 217-1 V3.3.1:2021
01-december-2021
Fiksni radijski sistemi - Karakteristike in zahteve za opremo tipa točka-točka in
antene - 1. del: Pregled, splošne karakteristike in zahteve, ki niso povezane z
dostopom do radijskega spektra
Fixed Radio Systems - Characteristics and requirements for point-to-point equipment
and antennas - Part 1: Overview, common characteristics and requirements not related
to access to radio spectrum
Ta slovenski standard je istoveten z: ETSI EN 302 217-1 V3.3.1 (2021-10)
ICS:
33.060.30 Radiorelejni in fiksni satelitski Radio relay and fixed satellite
komunikacijski sistemi communications systems
33.120.40 Antene Aerials
SIST EN 302 217-1 V3.3.1:2021 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 302 217-1 V3.3.1:2021
---------------------- Page: 2 ----------------------
SIST EN 302 217-1 V3.3.1:2021
ETSI EN 302 217-1 V3.3.1 (2021-10)
EUROPEAN STANDARD
Fixed Radio Systems;
Characteristics and requirements for
point-to-point equipment and antennas;
Part 1: Overview, common characteristics and
requirements not related to access to radio spectrum
---------------------- Page: 3 ----------------------
SIST EN 302 217-1 V3.3.1:2021
2 ETSI EN 302 217-1 V3.3.1 (2021-10)
Reference
REN/ATTM-0449
Keywords
antenna, DFRS, DRRS, FWA, point-to-point, radio,
transmission
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.
Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2021.
All rights reserved.
ETSI
---------------------- Page: 4 ----------------------
SIST EN 302 217-1 V3.3.1:2021
3 ETSI EN 302 217-1 V3.3.1 (2021-10)
Contents
Intellectual Property Rights . 7
Foreword . 7
Modal verbs terminology . 8
1 Scope . 9
2 References . 9
2.1 Normative references . 9
2.2 Informative references . 11
3 Definition of terms, symbols and abbreviations . 14
3.1 Terms . 14
3.2 Symbols . 20
3.3 Abbreviations . 20
4 Structure and applicability of the ETSI EN 302 217 series . 23
4.1 Generality . 23
4.2 Cross references to previously relevant ENs and TSs . 24
4.3 Summary of system options provided . 24
4.4 User's guide . 28
5 General characteristics . 30
5.1 Frequency bands and channel arrangements . 30
5.2 Special compatibility requirements between systems . 30
5.3 Transmission capacity and spectral efficiency . 30
5.4 Performance and availability requirements . 30
5.5 Environmental profiles . 31
5.5.0 Introduction. 31
5.5.1 Environmental profile under Directive 2014/53/EU . 31
5.5.2 ETSI standardized environmental profiles . 31
5.5.2.0 Generality . 31
5.5.2.1 Equipment intended for telecommunications applications installed in weather-protected locations
(indoor locations) . 32
5.5.2.2 Equipment intended for telecommunications applications installed in not-weather-protected
locations (outdoor locations) . 32
5.5.3 Test environment profiles . 32
5.6 Power supply . 32
5.6.0 Introduction. 32
5.6.1 Power supply profile under Directive 2014/53/EU . 32
5.6.2 ETSI power supply profile . 32
5.7 System block diagram . 32
6 Baseband interfaces and parameters . 33
6.0 Introduction . 33
6.1 Ethernet interfaces . 33
6.2 Plesiochronous interfaces . 33
6.3 Synchronous digital hierarchy interfaces . 34
6.4 Other baseband data interfaces . 34
7 Main requirements . 34
7.0 Introduction . 34
7.1 General requirements . 34
7.1.1 System identification . 34
7.1.2 System nominal loading . 35
7.1.3 Environmental profile . 35
7.2 Transmitter characteristics. 35
7.2.1 Transmitter power and power tolerance . 35
7.2.1.1 Transmitter maximum power and EIRP . 35
7.2.1.2 Transmitter combined output power and EIRP limits . 35
ETSI
---------------------- Page: 5 ----------------------
SIST EN 302 217-1 V3.3.1:2021
4 ETSI EN 302 217-1 V3.3.1 (2021-10)
7.2.1.3 Transmitter output power environmental variation . 35
7.2.2 Transmitter power and frequency control . 36
7.2.2.1 Transmitter Power and Frequency Control (ATPC, RTPC and RFC) . 36
7.2.2.1.1 Automatic Transmit Power Control (ATPC) . 36
7.2.2.1.2 Remote Transmit Power Control (RTPC) . 37
7.2.2.1.3 Transmitter Remote Frequency Control (RFC) . 37
7.2.3 Transmitter Radio Frequency spectrum mask. 37
7.2.4 Transmitter discrete CW components exceeding the spectrum mask limit . 37
7.2.4.1 Transmitter discrete CW components at the symbol rate . 37
7.2.4.2 Transmitter other discrete CW components exceeding the spectrum mask limit . 37
7.2.5 Transmitter unwanted emissions in the spurious domain . 37
7.2.6 Transmitter dynamic change of modulation order . 37
7.2.7 Transmitter radio frequency tolerance . 37
7.2.8 Transmitter emission limitations outside the allocated band . 38
7.3 Receiver characteristics . 38
7.3.1 Unwanted emissions in the spurious domain . 38
7.3.2 Receiver BER as a function of Receiver Signal Level (RSL) . 38
7.3.3 Receiver selectivity . 38
7.3.3.1 Introduction . 38
7.3.3.2 Receiver co-channel, first and second adjacent channel interference sensitivity . 38
7.3.3.3 Blocking (CW spurious interference sensitivity) . 38
7.4 Antenna directional characteristics . 38
8 Complementary requirements . 39
8.0 Introduction . 39
8.1 Branching/feeder requirements . 39
8.1.1 Waveguide flanges (or other connectors) . 39
8.1.2 Return loss of feeder/antenna systems at equipment antenna port (C/C' reference point) . 40
8.2 Intermodulation products . 41
8.3 Transmitter characteristics. 41
8.3.1 Unwanted emissions - internal . 41
8.3.2 Transmitter Radio Frequency (RF) spectrum mask when mixed manufacturer compatibility is
required . 41
8.4 Receiver characteristics . 42
8.4.1 Receiver maximum input level and input level range . 42
8.4.2 Unwanted emissions - internal . 43
8.4.3 Image rejection . 43
8.4.4 Innermost channel selectivity . 44
8.5 System performance without diversity . 44
8.5.1 Equipment Residual BER (RBER) . 44
8.5.2 Distortion sensitivity . 46
8.5.2.1 Introduction . 46
8.5.2.2 Requirement . 46
8.5.2.3 Assessment . 48
8.5.3 Interference sensitivity for CCDP with XPIC operation . 48
8.5.3.1 General . 48
8.5.3.2 Co-channel "internal" interference sensitivity in flat fading conditions . 48
8.6 System characteristics with diversity . 49
8.6.0 Introduction. 49
8.6.1 Differential delay compensation . 49
8.6.2 BER performance . 49
Annex A (normative): Transmitter Radio Frequency spectrum masks and receiver
selectivity when mixed manufacturer compatibility is required . 50
A.0 Introduction . 50
A.1 Transmitter Radio Frequency masks assessment . 51
A.2 Normal channels - Emission mask floor . 51
A.2.1 RBER impact . 51
A.2.2 Local TX to RX compatibility . 51
A.2.2.1 Spectrum mask . 51
ETSI
---------------------- Page: 6 ----------------------
SIST EN 302 217-1 V3.3.1:2021
5 ETSI EN 302 217-1 V3.3.1 (2021-10)
A.2.2.2 Receiver selectivity . 52
A.3 Innermost channels for channel arrangements from about 4 GHz to about 8,5 GHz with channel
separation of 28 MHz to 30 MHz . 52
A.3.0 Introduction . 52
A.3.1 Innermost channels spectrum masks . 52
A.3.2 Receiver innermost channel selectivity . 54
A.4 Innermost channels for channel arrangements from about 4 GHz to 11 GHz with channel
separation of 40 MHz . 55
A.4.0 Introduction . 55
A.4.1 Innermost channels spectrum masks . 55
A.4.2 Receiver innermost channels selectivity . 56
A.5 Innermost channels for 18 GHz channel arrangements with channel separation of 55 MHz . 57
A.5.0 Introduction . 57
A.5.1 Innermost channels spectrum masks . 57
A.5.2 Receiver innermost channels selectivity . 58
Annex B (normative): Definition of equivalent data rates for packet data, PDH/SDH and
other signals on the traffic interface. 60
Annex C (informative): Information on Multi-channel and Channels-aggregation differences
and operation . 61
C.1 Multi-channel and Channels-aggregation (two channel case) . 61
C.2 Channels-aggregation (more than two channels case) . 62
Annex D (informative): Additional information on relevant characteristics and operation . 65
D.1 Residual Bit Error Ratio (RBER) and Residual Frame Error Ratio (RFER) . 65
D.2 Measurement test set for XPI characteristics . 66
D.3 Differential delay compensation range . 67
D.4 FER/BER equivalence and FER performance measurement equipment settings (example) . 68
D.4.1 FER/BER equivalence . 68
D.4.2 FER equipment settings and measurement techniques (example) . 69
D.5 Impact of power control (ATPC and/or RTPC), mixed-mode and bandwidth adaptive operation
on spectrum mask and link design requirements . 69
D.5.0 Introduction . 69
D.5.1 ATPC and RTPC . 69
D.5.1.1 ATPC . 69
D.5.1.2 ATPC and RTPC implementation background . 70
D.5.2 Mixed−mode and bandwidth adaptive operation impact . 72
D.5.2.1 Mixed−mode basic concepts . 72
D.5.2.2 Bandwidth adaptive . 73
D.5.2.2.1 Basic concepts . 73
D.5.2.2.2 Bandwidth (channel) occupancy . 73
D.5.3 Impact on frequency co ordination . 73
D.5.4 Impact of operating conditions on the access to radio spectrum through European Harmonised Standard . 73
D.6 Typical interference sensitivity behaviour for frequency planning purpose . 74
D.7 Band and Carrier Aggregation (BCA) operation . 74
Annex E (informative): Mechanical characteristics . 76
Annex F (informative): Mitigation techniques referred in CEPT/ERC/DEC(00)07
(18 GHz band) . 77
Annex G (informative): Bibliography . 78
ETSI
---------------------- Page: 7 ----------------------
SIST EN 302 217-1 V3.3.1:2021
6 ETSI EN 302 217-1 V3.3.1 (2021-10)
Annex H (informative): Change history . 79
History . 80
ETSI
---------------------- Page: 8 ----------------------
SIST EN 302 217-1 V3.3.1:2021
7 ETSI EN 302 217-1 V3.3.1 (2021-10)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The declarations
pertaining to these essential IPRs, if any, are publicly available for ETSI members and non-members, and can be
found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to
ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the
ETSI Web server (https://ipr.etsi.org/).
Pursuant to the ETSI Directives including the ETSI IPR Policy, no investigation regarding the essentiality of IPRs,
including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not
referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become,
essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its
Members. 3GPP™ and LTE™ are trademarks of ETSI regist
...
Draft ETSI EN 302 217-1 V3.3.0 (2021-06)
EUROPEAN STANDARD
Fixed Radio Systems;
Characteristics and requirements for
point-to-point equipment and antennas;
Part 1: Overview, common characteristics and
requirements not related to access to radio spectrum
---------------------- Page: 1 ----------------------
2 Draft ETSI EN 302 217-1 V3.3.0 (2021-06)
Reference
REN/ATTM-0449
Keywords
antenna, DFRS, DRRS, FWA, point-to-point, radio,
transmission
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.
Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2021.
All rights reserved.
ETSI
---------------------- Page: 2 ----------------------
3 Draft ETSI EN 302 217-1 V3.3.0 (2021-06)
Contents
Intellectual Property Rights . 7
Foreword . 7
Modal verbs terminology . 8
1 Scope . 9
2 References . 9
2.1 Normative references . 9
2.2 Informative references . 11
3 Definition of terms, symbols and abbreviations . 14
3.1 Terms . 14
3.2 Symbols . 20
3.3 Abbreviations . 20
4 Structure and applicability of the ETSI EN 302 217 series . 23
4.1 Generality . 23
4.2 Cross references to previously relevant ENs and TSs . 24
4.3 Summary of system options provided . 24
4.4 User's guide . 28
5 General characteristics . 30
5.1 Frequency bands and channel arrangements . 30
5.2 Special compatibility requirements between systems . 30
5.3 Transmission capacity and spectral efficiency . 30
5.4 Performance and availability requirements . 30
5.5 Environmental profiles . 31
5.5.0 Introduction. 31
5.5.1 Environmental profile under Directive 2014/53/EU . 31
5.5.2 ETSI standardized environmental profiles . 31
5.5.2.0 Generality . 31
5.5.2.1 Equipment intended for telecommunications applications installed in weather-protected locations
(indoor locations) . 32
5.5.2.2 Equipment intended for telecommunications applications installed in not-weather-protected
locations (outdoor locations) . 32
5.5.3 Test environment profiles . 32
5.6 Power supply . 32
5.6.0 Introduction. 32
5.6.1 Power supply profile under Directive 2014/53/EU . 32
5.6.2 ETSI power supply profile . 32
5.7 System block diagram . 32
6 Baseband interfaces and parameters . 33
6.0 Introduction . 33
6.1 Ethernet interfaces . 33
6.2 Plesiochronous interfaces . 33
6.3 Synchronous digital hierarchy interfaces . 34
6.4 Other baseband data interfaces . 34
7 Main requirements . 34
7.0 Introduction . 34
7.1 General requirements . 34
7.1.1 System identification . 34
7.1.2 System nominal loading . 35
7.1.3 Environmental profile . 35
7.2 Transmitter characteristics. 35
7.2.1 Transmitter power and power tolerance . 35
7.2.1.1 Transmitter maximum power and EIRP . 35
7.2.1.2 Transmitter combined output power and EIRP limits . 35
ETSI
---------------------- Page: 3 ----------------------
4 Draft ETSI EN 302 217-1 V3.3.0 (2021-06)
7.2.1.3 Transmitter output power environmental variation . 35
7.2.2 Transmitter power and frequency control . 36
7.2.2.1 Transmitter Power and Frequency Control (ATPC, RTPC and RFC) . 36
7.2.2.1.1 Automatic Transmit Power Control (ATPC) . 36
7.2.2.1.2 Remote Transmit Power Control (RTPC) . 37
7.2.2.1.3 Transmitter Remote Frequency Control (RFC) . 37
7.2.3 Transmitter Radio Frequency spectrum mask. 37
7.2.4 Transmitter discrete CW components exceeding the spectrum mask limit . 37
7.2.4.1 Transmitter discrete CW components at the symbol rate . 37
7.2.4.2 Transmitter other discrete CW components exceeding the spectrum mask limit . 37
7.2.5 Transmitter unwanted emissions in the spurious domain . 37
7.2.6 Transmitter dynamic change of modulation order . 37
7.2.7 Transmitter radio frequency tolerance . 37
7.2.8 Transmitter emission limitations outside the allocated band . 38
7.3 Receiver characteristics . 38
7.3.1 Unwanted emissions in the spurious domain . 38
7.3.2 Receiver BER as a function of Receiver Signal Level (RSL) . 38
7.3.3 Receiver selectivity . 38
7.3.3.1 Introduction . 38
7.3.3.2 Receiver co-channel, first and second adjacent channel interference sensitivity . 38
7.3.3.3 Blocking (CW spurious interference sensitivity) . 38
7.4 Antenna directional characteristics . 38
8 Complementary requirements . 39
8.0 Introduction . 39
8.1 Branching/feeder requirements . 39
8.1.1 Waveguide flanges (or other connectors) . 39
8.1.2 Return loss of feeder/antenna systems at equipment antenna port (C/C' reference point) . 40
8.2 Intermodulation products . 41
8.3 Transmitter characteristics. 41
8.3.1 Unwanted emissions - internal . 41
8.3.2 Transmitter Radio Frequency (RF) spectrum mask when mixed manufacturer compatibility is
required . 41
8.4 Receiver characteristics . 42
8.4.1 Receiver maximum input level and input level range . 42
8.4.2 Unwanted emissions - internal . 43
8.4.3 Image rejection . 43
8.4.4 Innermost channel selectivity . 44
8.5 System performance without diversity . 44
8.5.1 Equipment Residual BER (RBER) . 44
8.5.2 Distortion sensitivity . 46
8.5.2.1 Introduction . 46
8.5.2.2 Requirement . 46
8.5.2.3 Assessment . 48
8.5.3 Interference sensitivity for CCDP with XPIC operation . 48
8.5.3.1 General . 48
8.5.3.2 Co-channel "internal" interference sensitivity in flat fading conditions . 48
8.6 System characteristics with diversity . 49
8.6.0 Introduction. 49
8.6.1 Differential delay compensation . 49
8.6.2 BER performance . 49
Annex A (normative): Transmitter Radio Frequency spectrum masks and receiver
selectivity when mixed manufacturer compatibility is required . 50
A.0 Introduction . 50
A.1 Transmitter Radio Frequency masks assessment . 51
A.2 Normal channels - Emission mask floor . 51
A.2.1 RBER impact . 51
A.2.2 Local TX to RX compatibility . 51
A.2.2.1 Spectrum mask . 51
ETSI
---------------------- Page: 4 ----------------------
5 Draft ETSI EN 302 217-1 V3.3.0 (2021-06)
A.2.2.2 Receiver selectivity . 52
A.3 Innermost channels for channel arrangements from about 4 GHz to about 8,5 GHz with channel
separation of 28 MHz to 30 MHz . 52
A.3.0 Introduction . 52
A.3.1 Innermost channels spectrum masks . 52
A.3.2 Receiver innermost channel selectivity . 54
A.4 Innermost channels for channel arrangements from about 4 GHz to 11 GHz with channel
separation of 40 MHz . 55
A.4.0 Introduction . 55
A.4.1 Innermost channels spectrum masks . 55
A.4.2 Receiver innermost channels selectivity . 56
A.5 Innermost channels for 18 GHz channel arrangements with channel separation of 55 MHz . 57
A.5.0 Introduction . 57
A.5.1 Innermost channels spectrum masks . 57
A.5.2 Receiver innermost channels selectivity . 58
Annex B (normative): Definition of equivalent data rates for packet data, PDH/SDH and
other signals on the traffic interface. 60
Annex C (informative): Information on Multi-channel and Channels-aggregation differences
and operation . 61
C.1 Multi-channel and Channels-aggregation (two channel case) . 61
C.2 Channels-aggregation (more than two channels case) . 62
Annex D (informative): Additional information on relevant characteristics and operation . 65
D.1 Residual Bit Error Ratio (RBER) and Residual Frame Error Ratio (RFER) . 65
D.2 Measurement test set for XPI characteristics . 66
D.3 Differential delay compensation range . 67
D.4 FER/BER equivalence and FER performance measurement equipment settings (example) . 68
D.4.1 FER/BER equivalence . 68
D.4.2 FER equipment settings and measurement techniques (example) . 69
D.5 Impact of power control (ATPC and/or RTPC), mixed-mode and bandwidth adaptive operation
on spectrum mask and link design requirements . 69
D.5.0 Introduction . 69
D.5.1 ATPC and RTPC . 69
D.5.1.1 ATPC . 69
D.5.1.2 ATPC and RTPC implementation background . 70
D.5.2 Mixed−mode and bandwidth adaptive operation impact . 72
D.5.2.1 Mixed−mode basic concepts . 72
D.5.2.2 Bandwidth adaptive . 73
D.5.2.2.1 Basic concepts . 73
D.5.2.2.2 Bandwidth (channel) occupancy . 73
D.5.3 Impact on frequency co ordination . 73
D.5.4 Impact of operating conditions on the access to radio spectrum through European Harmonised Standard . 73
D.6 Typical interference sensitivity behaviour for frequency planning purpose . 74
D.7 Band and Carrier Aggregation (BCA) operation . 74
Annex E (informative): Mechanical characteristics . 76
Annex F (informative): Mitigation techniques referred in CEPT/ERC/DEC(00)07
(18 GHz band) . 77
Annex G (informative): Bibliography . 78
ETSI
---------------------- Page: 5 ----------------------
6 Draft ETSI EN 302 217-1 V3.3.0 (2021-06)
Annex H (informative): Change history . 79
History . 80
ETSI
---------------------- Page: 6 ----------------------
7 Draft ETSI EN 302 217-1 V3.3.0 (2021-06)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The declarations
pertaining to these essential IPRs, if any, are publicly available for ETSI members and non-members, and can be
found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to
ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the
ETSI Web server (https://ipr.etsi.org/).
Pursuant to the ETSI Directives including the ETSI IPR Policy, no investigation regarding the essentiality of IPRs,
including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not
referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become,
essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the benefit of its
Members. 3GPP™ and LTE™ are trademarks of ETSI registered for the benefit of its Members and of the 3GPP
Organizational Partners. oneM2M™ logo is a trademark of ETSI registered for the benefit of its Members and of the
®
oneM2M Partners. GSM and the GSM logo are trademarks registered and owned by the GSM Association.
Foreword
This draft European Standard (EN) has been produced by ETSI Technical Committee Access, Terminals, Transmission
and Multiplexing (ATTM), and is now submitted for the combined Public Enquiry and Vote phase of the ETSI
standards EN Approval Procedure.
The present document is part 1 of a multi-part deliverable covering the Fixed Radio Systems; Characteristics and
requirements for point-to-point equipment and antennas, as identified below (see note):
Part 1: "Overview, common characteristics and requirements not related to access to radio spectrum";
Part 2: "Digital systems operating in frequency bands from 1 GHz to 86 GHz; Harmonised Standard for access to
radio spectrum";
Part 4: "Antennas".
NOTE: In previous regulatory regime under Directive 1999/5/EC more parts (harmonised and non-harmonised
standards) were published. Since Directive 2014/53/EU [i.1] repealed
...
SLOVENSKI STANDARD
oSIST prEN 302 217-1 V3.3.0:2021
01-julij-2021
Fiksni radijski sistemi - Karakteristike in zahteve za opremo tipa točka-točka in
antene - 1. del: Pregled, splošne karakteristike in zahteve, ki niso povezane z
dostopom do radijskega spektra
Fixed Radio Systems - Characteristics and requirements for point-to-point equipment
and antennas - Part 1: Overview, common characteristics and requirements not related
to access to radio spectrum
Ta slovenski standard je istoveten z: ETSI EN 302 217-1 V3.3.0 (2021-06)
ICS:
33.060.30 Radiorelejni in fiksni satelitski Radio relay and fixed satellite
komunikacijski sistemi communications systems
33.120.40 Antene Aerials
oSIST prEN 302 217-1 V3.3.0:2021 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
oSIST prEN 302 217-1 V3.3.0:2021
---------------------- Page: 2 ----------------------
oSIST prEN 302 217-1 V3.3.0:2021
Draft ETSI EN 302 217-1 V3.3.0 (2021-06)
EUROPEAN STANDARD
Fixed Radio Systems;
Characteristics and requirements for
point-to-point equipment and antennas;
Part 1: Overview, common characteristics and
requirements not related to access to radio spectrum
---------------------- Page: 3 ----------------------
oSIST prEN 302 217-1 V3.3.0:2021
2 Draft ETSI EN 302 217-1 V3.3.0 (2021-06)
Reference
REN/ATTM-0449
Keywords
antenna, DFRS, DRRS, FWA, point-to-point, radio,
transmission
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE
Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16
Siret N° 348 623 562 00017 - APE 7112B
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° w061004871
Important notice
The present document can be downloaded from:
http://www.etsi.org/standards-search
The present document may be made available in electronic versions and/or in print. The content of any electronic and/or
print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any
existing or perceived difference in contents between such versions and/or in print, the prevailing version of an ETSI
deliverable is the one made publicly available in PDF format at www.etsi.org/deliver.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
https://portal.etsi.org/TB/ETSIDeliverableStatus.aspx
If you find errors in the present document, please send your comment to one of the following services:
https://portal.etsi.org/People/CommiteeSupportStaff.aspx
Notice of disclaimer & limitation of liability
The information provided in the present deliverable is directed solely to professionals who have the appropriate degree of
experience to understand and interpret its content in accordance with generally accepted engineering or
other professional standard and applicable regulations.
No recommendation as to products and services or vendors is made or should be implied.
In no event shall ETSI be held liable for loss of profits or any other incidental or consequential damages.
Any software contained in this deliverable is provided "AS IS" with no warranties, express or implied, including but not
limited to, the warranties of merchantability, fitness for a particular purpose and non-infringement of intellectual property
rights and ETSI shall not be held liable in any event for any damages whatsoever (including, without limitation, damages
for loss of profits, business interruption, loss of information, or any other pecuniary loss) arising out of or related to the use
of or inability to use the software.
Copyright Notification
No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and
microfilm except as authorized by written permission of ETSI.
The content of the PDF version shall not be modified without the written authorization of ETSI.
The copyright and the foregoing restriction extend to reproduction in all media.
© ETSI 2021.
All rights reserved.
ETSI
---------------------- Page: 4 ----------------------
oSIST prEN 302 217-1 V3.3.0:2021
3 Draft ETSI EN 302 217-1 V3.3.0 (2021-06)
Contents
Intellectual Property Rights . 7
Foreword . 7
Modal verbs terminology . 8
1 Scope . 9
2 References . 9
2.1 Normative references . 9
2.2 Informative references . 11
3 Definition of terms, symbols and abbreviations . 14
3.1 Terms . 14
3.2 Symbols . 20
3.3 Abbreviations . 20
4 Structure and applicability of the ETSI EN 302 217 series . 23
4.1 Generality . 23
4.2 Cross references to previously relevant ENs and TSs . 24
4.3 Summary of system options provided . 24
4.4 User's guide . 28
5 General characteristics . 30
5.1 Frequency bands and channel arrangements . 30
5.2 Special compatibility requirements between systems . 30
5.3 Transmission capacity and spectral efficiency . 30
5.4 Performance and availability requirements . 30
5.5 Environmental profiles . 31
5.5.0 Introduction. 31
5.5.1 Environmental profile under Directive 2014/53/EU . 31
5.5.2 ETSI standardized environmental profiles . 31
5.5.2.0 Generality . 31
5.5.2.1 Equipment intended for telecommunications applications installed in weather-protected locations
(indoor locations) . 32
5.5.2.2 Equipment intended for telecommunications applications installed in not-weather-protected
locations (outdoor locations) . 32
5.5.3 Test environment profiles . 32
5.6 Power supply . 32
5.6.0 Introduction. 32
5.6.1 Power supply profile under Directive 2014/53/EU . 32
5.6.2 ETSI power supply profile . 32
5.7 System block diagram . 32
6 Baseband interfaces and parameters . 33
6.0 Introduction . 33
6.1 Ethernet interfaces . 33
6.2 Plesiochronous interfaces . 33
6.3 Synchronous digital hierarchy interfaces . 34
6.4 Other baseband data interfaces . 34
7 Main requirements . 34
7.0 Introduction . 34
7.1 General requirements . 34
7.1.1 System identification . 34
7.1.2 System nominal loading . 35
7.1.3 Environmental profile . 35
7.2 Transmitter characteristics. 35
7.2.1 Transmitter power and power tolerance . 35
7.2.1.1 Transmitter maximum power and EIRP . 35
7.2.1.2 Transmitter combined output power and EIRP limits . 35
ETSI
---------------------- Page: 5 ----------------------
oSIST prEN 302 217-1 V3.3.0:2021
4 Draft ETSI EN 302 217-1 V3.3.0 (2021-06)
7.2.1.3 Transmitter output power environmental variation . 35
7.2.2 Transmitter power and frequency control . 36
7.2.2.1 Transmitter Power and Frequency Control (ATPC, RTPC and RFC) . 36
7.2.2.1.1 Automatic Transmit Power Control (ATPC) . 36
7.2.2.1.2 Remote Transmit Power Control (RTPC) . 37
7.2.2.1.3 Transmitter Remote Frequency Control (RFC) . 37
7.2.3 Transmitter Radio Frequency spectrum mask. 37
7.2.4 Transmitter discrete CW components exceeding the spectrum mask limit . 37
7.2.4.1 Transmitter discrete CW components at the symbol rate . 37
7.2.4.2 Transmitter other discrete CW components exceeding the spectrum mask limit . 37
7.2.5 Transmitter unwanted emissions in the spurious domain . 37
7.2.6 Transmitter dynamic change of modulation order . 37
7.2.7 Transmitter radio frequency tolerance . 37
7.2.8 Transmitter emission limitations outside the allocated band . 38
7.3 Receiver characteristics . 38
7.3.1 Unwanted emissions in the spurious domain . 38
7.3.2 Receiver BER as a function of Receiver Signal Level (RSL) . 38
7.3.3 Receiver selectivity . 38
7.3.3.1 Introduction . 38
7.3.3.2 Receiver co-channel, first and second adjacent channel interference sensitivity . 38
7.3.3.3 Blocking (CW spurious interference sensitivity) . 38
7.4 Antenna directional characteristics . 38
8 Complementary requirements . 39
8.0 Introduction . 39
8.1 Branching/feeder requirements . 39
8.1.1 Waveguide flanges (or other connectors) . 39
8.1.2 Return loss of feeder/antenna systems at equipment antenna port (C/C' reference point) . 40
8.2 Intermodulation products . 41
8.3 Transmitter characteristics. 41
8.3.1 Unwanted emissions - internal . 41
8.3.2 Transmitter Radio Frequency (RF) spectrum mask when mixed manufacturer compatibility is
required . 41
8.4 Receiver characteristics . 42
8.4.1 Receiver maximum input level and input level range . 42
8.4.2 Unwanted emissions - internal . 43
8.4.3 Image rejection . 43
8.4.4 Innermost channel selectivity . 44
8.5 System performance without diversity . 44
8.5.1 Equipment Residual BER (RBER) . 44
8.5.2 Distortion sensitivity . 46
8.5.2.1 Introduction . 46
8.5.2.2 Requirement . 46
8.5.2.3 Assessment . 48
8.5.3 Interference sensitivity for CCDP with XPIC operation . 48
8.5.3.1 General . 48
8.5.3.2 Co-channel "internal" interference sensitivity in flat fading conditions . 48
8.6 System characteristics with diversity . 49
8.6.0 Introduction. 49
8.6.1 Differential delay compensation . 49
8.6.2 BER performance . 49
Annex A (normative): Transmitter Radio Frequency spectrum masks and receiver
selectivity when mixed manufacturer compatibility is required . 50
A.0 Introduction . 50
A.1 Transmitter Radio Frequency masks assessment . 51
A.2 Normal channels - Emission mask floor . 51
A.2.1 RBER impact . 51
A.2.2 Local TX to RX compatibility . 51
A.2.2.1 Spectrum mask . 51
ETSI
---------------------- Page: 6 ----------------------
oSIST prEN 302 217-1 V3.3.0:2021
5 Draft ETSI EN 302 217-1 V3.3.0 (2021-06)
A.2.2.2 Receiver selectivity . 52
A.3 Innermost channels for channel arrangements from about 4 GHz to about 8,5 GHz with channel
separation of 28 MHz to 30 MHz . 52
A.3.0 Introduction . 52
A.3.1 Innermost channels spectrum masks . 52
A.3.2 Receiver innermost channel selectivity . 54
A.4 Innermost channels for channel arrangements from about 4 GHz to 11 GHz with channel
separation of 40 MHz . 55
A.4.0 Introduction . 55
A.4.1 Innermost channels spectrum masks . 55
A.4.2 Receiver innermost channels selectivity . 56
A.5 Innermost channels for 18 GHz channel arrangements with channel separation of 55 MHz . 57
A.5.0 Introduction . 57
A.5.1 Innermost channels spectrum masks . 57
A.5.2 Receiver innermost channels selectivity . 58
Annex B (normative): Definition of equivalent data rates for packet data, PDH/SDH and
other signals on the traffic interface. 60
Annex C (informative): Information on Multi-channel and Channels-aggregation differences
and operation . 61
C.1 Multi-channel and Channels-aggregation (two channel case) . 61
C.2 Channels-aggregation (more than two channels case) . 62
Annex D (informative): Additional information on relevant characteristics and operation . 65
D.1 Residual Bit Error Ratio (RBER) and Residual Frame Error Ratio (RFER) . 65
D.2 Measurement test set for XPI characteristics . 66
D.3 Differential delay compensation range . 67
D.4 FER/BER equivalence and FER performance measurement equipment settings (example) . 68
D.4.1 FER/BER equivalence . 68
D.4.2 FER equipment settings and measurement techniques (example) . 69
D.5 Impact of power control (ATPC and/or RTPC), mixed-mode and bandwidth adaptive operation
on spectrum mask and link design requirements . 69
D.5.0 Introduction . 69
D.5.1 ATPC and RTPC . 69
D.5.1.1 ATPC . 69
D.5.1.2 ATPC and RTPC implementation background . 70
D.5.2 Mixed−mode and bandwidth adaptive operation impact . 72
D.5.2.1 Mixed−mode basic concepts . 72
D.5.2.2 Bandwidth adaptive . 73
D.5.2.2.1 Basic concepts . 73
D.5.2.2.2 Bandwidth (channel) occupancy . 73
D.5.3 Impact on frequency co ordination . 73
D.5.4 Impact of operating conditions on the access to radio spectrum through European Harmonised Standard . 73
D.6 Typical interference sensitivity behaviour for frequency planning purpose . 74
D.7 Band and Carrier Aggregation (BCA) operation . 74
Annex E (informative): Mechanical characteristics . 76
Annex F (informative): Mitigation techniques referred in CEPT/ERC/DEC(00)07
(18 GHz band) . 77
Annex G (informative): Bibliography . 78
ETSI
---------------------- Page: 7 ----------------------
oSIST prEN 302 217-1 V3.3.0:2021
6 Draft ETSI EN 302 217-1 V3.3.0 (2021-06)
Annex H (informative): Change history . 79
History . 80
ETSI
---------------------- Page: 8 ----------------------
oSIST prEN 302 217-1 V3.3.0:2021
7 Draft ETSI EN 302 217-1 V3.3.0 (2021-06)
Intellectual Property Rights
Essential patents
IPRs essential or potentially essential to normative deliverables may have been declared to ETSI. The declarations
pertaining to these essential IPRs, if any, are publicly available for ETSI members and non-members, and can be
found in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to
ETSI in respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the
ETSI Web server (https://ipr.etsi.org/).
Pursuant to the ETSI Directives including the ETSI IPR Policy, no investigation regarding the essentiality of IPRs,
including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not
referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become,
essential to the present document.
Trademarks
The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.
ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no
right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does
not constitute an endorsement by ETSI of products, services or organizations associated with those trademarks.
DECT™, PLUGTESTS™, UMTS™ and the ETSI logo are trademarks of ETSI registered for the be
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.