ETSI EN 301 842-4 V1.1.1 (2005-02)

Electromagnetic compatibility and Radio spectrum Matters (ERM); VHF air-ground Digital Link (VDL) Mode 4 radio equipment; Technical characteristics and methods of measurement for ground-based equipment; Part 4: Point-to-point functions

REN/ERM-TG25-016-4

Elektromagnetna združljivost in zadeve v zvezi z radijskim spektrom (ERM) – Radijska oprema za digitalne povezave VHF zrak-tla, 4. način – Tehnične karakteristike in merilne metode za talno opremo – 4. del: Funkcije za sistem točka-točka

General Information

• Status: Published
• Publication Date: 23-Feb-2005
• Technical Committee: ERM TG25 - ERM Aeronautical
• Current Stage: 12 - Completion
• Due Date: 04-Mar-2005
• Completion Date: 24-Feb-2005
• Mandate: M/318
• Ref Project: SIST EN 301 842-4 V1.1.1:2006 - Electromagnetic compatibility and Radio spectrum Matters (ERM); VHF air-ground Digital Link (VDL) Mode 4 radio equipment; Technical characteristics and methods of measurement for ground-based equipment; Part 4: Point-to-point functions

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 301 842-4 V1.1.1:2006
01-marec-2006
(OHNWURPDJQHWQD]GUXåOMLYRVWLQ]DGHYHY]YH]L]UDGLMVNLPVSHNWURP(50±
5DGLMVNDRSUHPD]DGLJLWDOQHSRYH]DYH9+)]UDNWODQDþLQ±7HKQLþQH
NDUDNWHULVWLNHLQPHULOQHPHWRGH]DWDOQRRSUHPR±GHO)XQNFLMH]DVLVWHPWRþND
WRþND
Electromagnetic compatibility and Radio spectrum Matters (ERM); VHF air-ground Digital
Link (VDL) Mode 4 radio equipment; Technical characteristics and methods of
measurement for ground-based equipment; Part 4: Point-to-point functions
Ta slovenski standard je istoveten z: EN 301 842-4 Version 1.1.1
ICS:
33.060.99 Druga oprema za radijske Other equipment for
komunikacije radiocommunications
33.100.01 Elektromagnetna združljivost Electromagnetic compatibility
na splošno in general
SIST EN 301 842-4 V1.1.1:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 301 842-4 V1.1.1:2006

---------------------- Page: 2 ----------------------

SIST EN 301 842-4 V1.1.1:2006

ETSI EN 301 842-4 V1.1.1 (2005-02)
European Standard (Telecommunications series)

Electromagnetic compatibility
and Radio spectrum Matters (ERM);
VHF air-ground Digital Link (VDL) Mode 4 radio equipment;
Technical characteristics and methods of measurement
for ground-based equipment;
Part 4: Point-to-point functions

---------------------- Page: 3 ----------------------

SIST EN 301 842-4 V1.1.1:2006
 2 ETSI EN 301 842-4 V1.1.1 (2005-02)



Reference
DEN/ERM-TG25-016-4
Keywords
aeronautical, digital, radio, testing, VHF
ETSI
650 Route des Lucioles
F-06921 Sophia Antipolis Cedex - FRANCE

Tel.: [phone]  Fax: [phone]

Siret N° 348 623 562 00017 - NAF 742 C
Association à but non lucratif enregistrée à la
Sous-Préfecture de Grasse (06) N° 7803/88

Important notice
Individual copies of the present document can be downloaded from:
http://www.etsi.org
The present document may be made available in more than one electronic version or in print. In any case of existing or
perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF).
In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive
within ETSI Secretariat.
Users of the present document should be aware that the document may be subject to revision or change of status.
Information on the current status of this and other ETSI documents is available at
http://portal.etsi.org/tb/status/status.asp
If you find errors in the present document, please send your comment to one of the following services:
http://portal.etsi.org/chaircor/ETSI_support.asp
Copyright Notification
No part may be reproduced except as authorized by written permission.
The copyright and the foregoing restriction extend to reproduction in all media.

© European Telecommunications Standards Institute 2005.
All rights reserved.

TM TM TM
DECT , PLUGTESTS and UMTS are Trade Marks of ETSI registered for the benefit of its Members.
TM
TIPHON and the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members.
TM
3GPP is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners.
ETSI

---------------------- Page: 4 ----------------------

SIST EN 301 842-4 V1.1.1:2006
 3 ETSI EN 301 842-4 V1.1.1 (2005-02)
Contents
Intellectual Property Rights.6
Foreword.6
Introduction .7
1 Scope.8
2 References.9
3 Definitions and abbreviations.9
3.1 Definitions.9
3.1.1 Basic reference model definitions.9
3.1.2 Service conventions definitions .9
3.1.3 General definitions.10
3.2 Abbreviations.10
4 General description of VDL Mode 4 ground station point-to-point services.11
4.1 General.11
4.2 Data Link Service (DLS) and Link Management Entity (LME) .12
4.2.1 General.12
4.2.2 DLS timers.15
4.2.3 DLS counters.15
4.2.4 Toggle bit (T).15
4.2.5 State variables (T and T ) .15
t r
4.2.6 Initialize Bit (IB).16
4.2.7 More bit (M) .16
4.2.8 Priority (pr).16
4.2.9 Message fragmentation and concatenation .16
4.2.10 DLS procedures.16
4.2.10.1 Selection of DLS procedures.16
4.2.10.2 Short transmission procedures .16
4.2.10.3 Long transmission procedures.17
4.2.11 Linking transmissions.19
4.2.11.1 Types of linking .19
4.2.11.2 Combined RTS / DATA DLPDUs.19
4.2.11.3 Combined DATA / ACK DLPDUs.19
4.2.11.4 Combined RTS / ACK DLPDUs .19
4.2.11.5 Combined CTS / ACK DLPDUs .19
4.2.12 Ground-air link management.19
4.2.13 Air-air link management.20
4.3 Additional VSS Services .20
5 Minimum performance specification under standard test conditions.20
5.1 DLS Sublayer.20
5.1.1 General.20
5.1.1.1 Services.20
5.1.1.2 Data transfer.21
5.1.1.3 DATA DLPDU duplicate suppression and sequencing .21
5.1.1.4 Error detection.21
5.1.1.5 Station identification.21
5.1.1.6 Broadcast addressing.21
5.1.1.7 DLS Priority.21
5.1.1.8 DLS Link control DLPDUs .22
5.1.2 DLS protocol specification .22
5.1.2.1 State Variables.22
5.1.2.2 DLS burst formats.22
5.1.3 DLS system parameters.25
5.1.4 DLS procedures.26
5.1.4.1 Setting of re-transmission parameter.26
ETSI

---------------------- Page: 5 ----------------------

SIST EN 301 842-4 V1.1.1:2006
 4 ETSI EN 301 842-4 V1.1.1 (2005-02)
5.1.4.2 Selection of user data packet for transmission .27
5.1.4.3 Selection of transmission procedures.28
5.1.4.4 Short transmission procedures .28
5.1.4.5 Long transmission procedures.29
5.1.4.6 No link with sender .31
5.1.4.7 User data packet reception .32
5.1.4.8 Receipt of ACK DLPDU .32
5.1.4.9 Link reset.33
5.1.4.10 Linking DLS DLPDU transmissions.34
5.1.4.11 CTRL DLPDU.34
5.2 Link management entity sublayer.35
5.2.1 Services.35
5.2.1.1 General.35
5.2.1.2 Link provision.35
5.2.1.3 Link change notifications.35
5.2.1.4 CTRL DLPDU.35
5.2.1.5 Broadcast link management burst .36
5.2.2 Control (CTRL) parameter formats .36
5.2.2.1 Encoding.36
5.2.2.2 General purpose information parameters .36
5.2.2.3 Mobile-initiated information parameters.41
5.2.2.4 Ground-initiated modification parameters .42
5.2.2.5 Ground-initiated information parameters.45
5.2.3 LME timers and parameters.47
5.2.3.1 General.47
5.2.3.2 Counter L1 (maximum number of missed reservations) and Timer TL3 (inter-miss timer).48
5.2.3.3 Timer TL1 (maximum link overlap time) .48
5.2.3.4 Parameters TL2 (link initialization time) .49
5.2.3.5 Timer TL4 (leave generation latency).49
5.2.4 CTRL DLPDU types and procedures .49
5.2.5 CTRL transmission procedures.53
5.2.5.1 Link connectivity procedures.53
5.2.5.2 Ground Station Identification.53
5.2.5.3 Link establishment.53
5.2.5.4 Mobile-initiated handoff.54
5.2.5.5 Mobile-requested ground-initiated handoff.54
5.2.5.6 Ground-initiated handoff.55
5.2.5.7 Ground-requested mobile-initiated handoff.55
5.2.5.8 Ground-requested broadcast handoff .55
5.2.5.9 Ground-commanded autotune.56
5.2.6 VDL Mode 4 Mobile Subnetwork Dependent Convergence Function (SNDCF) .56
5.2.6.1 Frame Mode SNDCF .56
5.3 Additional VSS Requirements.56
5.3.1 Additional VSS quality of service parameters.56
5.3.1.1 Parameter Q5 (VSS retransmission parameters) .56
5.3.2 Unicast request protocol specification .56
5.3.2.1 Unicast request parameters.57
5.3.2.2 Unicast request transmission procedures .58
5.3.3 Information transfer request protocol specification .58
5.3.3.1 Information transfer request parameters.58
5.3.3.2 Information transfer request transmission procedures .60
5.3.3.3 Information transfer request acknowledgement procedures.60
5.3.4 Retransmission procedures.60
6 General design requirements.61
7 Protocol test procedures.61
7.1 General.61
7.2 Required test rig .61
7.3 Protocol test-suite description methodology .62
7.4 Detailed protocol test procedures .62
7.4.1 Test-suite overview.62
ETSI

---------------------- Page: 6 ----------------------

SIST EN 301 842-4 V1.1.1:2006
 5 ETSI EN 301 842-4 V1.1.1 (2005-02)
7.4.2 Declarations.64
7.4.3 Constraints.64
7.4.3.1 Abbreviations.64
7.4.3.1.1 Subfield mnemonics.64
7.4.3.1.2 Special characters used in the subfield definitions .65
7.4.3.1.3 Station addresses and positions .65
7.4.3.1.4 VDL bursts.66
7.4.3.2 Test cases.96
7.4.3.2.1 Test case macros.97
7.4.3.2.2 Test case descriptions .99
Annex A (informative): Cross reference matrix .147
Annex B (informative): Bibliography.156
History .161

ETSI

---------------------- Page: 7 ----------------------

SIST EN 301 842-4 V1.1.1:2006
 6 ETSI EN 301 842-4 V1.1.1 (2005-02)
Intellectual Property Rights
IPRs essential or potentially essential to the present document may have been declared to ETSI. The information
pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
in ETSI SR 000 314: "Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in
respect of ETSI standards", which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web
server (http://webapp.etsi.org/IPR/home.asp).
Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web
server) which are, or may be, or may become, essential to the present document.
Foreword
This European Standard (Telecommunications series) has been produced by ETSI Technical Committee
Electromagnetic compatibility and Radio spectrum Matters (ERM).
The present document is part 4 of a multi-part deliverable covering the VHF air-ground Digital Link (VDL) Mode 4
radio equipment; Technical characteristics and methods of measurement for ground-based equipment, as identified
below:
Part 1: "EN for ground equipment";
Part 2: "General description and data link layer";
Part 3: "Additional broadcast aspects";
Part 4: "Point-to-point functions".
The present document is accompanied by an equivalent airborne standard, EN 302 842 [7] Parts 1 to 4, covering the
VHF air-ground Digital Link (VDL) Mode 4 radio equipment; Technical characteristics and methods of measurement
for airborne equipment.

National transposition dates
Date of adoption of this EN: 18 February 2005
Date of latest announcement of this EN (doa): 31 May 2005
Date of latest publication of new National Standard
or endorsement of this EN (dop/e): 30 November 2005
Date of withdrawal of any conflicting National Standard (dow): 30 November 2005

ETSI

---------------------- Page: 8 ----------------------

SIST EN 301 842-4 V1.1.1:2006
 7 ETSI EN 301 842-4 V1.1.1 (2005-02)
Introduction
The present document states the technical specifications for Very High Frequency (VHF) Digital Link (VDL) Mode 4
ground-based radio transmitters, transceivers and receivers for air-ground communications operating in the VHF band,
using Gaussian-filtered Frequency Shift Keying (GFSK) Modulation with 25 kHz channel spacing and capable of
tuning to any of the 25 kHz channels from 118,000 MHz to 136,975 MHz as defined in ICAO VHF Digital Link (VDL)
Standards and Recommended Practices (SARPs) [8].
The present document may be used to produce tests for the assessment of the performance of the equipment. The
performance of the equipment submitted for type testing should be representative of the performance of the
corresponding production model.
The present document has been written on the assumption that:
• the type test measurements will be performed only once, in an accredited test laboratory and the measurements
accepted by the various authorities in order to grant type approval;
• if equipment available on the market is required to be checked it will be tested in accordance with the methods
of measurement specified in the present document or a documented alternative approved by the certifying
authority;
• Equipment comply with EN 301 489-22 [2], EN 301 842-1 [4] and EN 301 842-2 [5].
ETSI

---------------------- Page: 9 ----------------------

SIST EN 301 842-4 V1.1.1:2006
 8 ETSI EN 301 842-4 V1.1.1 (2005-02)
1 Scope
The present document provides part 4 of the technical specifications for Very High Frequency (VHF) Digital Link
(VDL) Mode 4 ground-based radio transmitters and receivers for air-ground communications operating in the VHF
band, using Gaussian-filtered Frequency Shift Keying (GFSK) Modulation with 25 kHz channel spacing and capable of
tuning to any of the 25 kHz channels from 118,000 MHz to 136,975 MHz as defined in ICAO VHF Digital Link (VDL)
Standards and Recommended Practices (SARPs) [8].
The present document is designed to ensure that equipment certified to it will be compatible with the relevant ICAO
VHF Digital Link (VDL) Standards and Recommended Practices (SARPs) [8] and VDL Mode 4 Technical Manual
(TM) [1].
Manufacturers should note that in future the tuning range for the ground transceivers may also cover any 25 kHz
channel from 108,000 MHz to 117,975 MHz.
The scope of the present document is limited to ground stations. The equivalent specification for airborne stations is
EN 302 842 [7].
A description of the scope of the VDL Mode 4 system is provided in part 2 of these technical specifications (see
EN 301 842-2 [5], clause 1).
EN 301 842-1 [4] deals with tests of the physical layer, EN 301 842-2 [5] deals with core link layer functionality and
EN 301 842-3 [6] with additional broadcast functionality. The present document deals with tests of the datalink layer
(DLS) and the link layer sufficient to support point-to-point functionality. Note that, as described in EN 301 842-2 [5], a
system supporting point-to-point functionality is required to conform to EN 301 489-22 [2], EN 301 842-1 [4],
EN 301 842-2 [5] and the specification in the present document.
The present document includes:
• references, definitions, abbreviations and symbols are provided in clauses 2 and 3;
• clause 4 describes the VDL Mode 4 ground station point-to-point functions;
• clause 5 performance specifications for the VDL Mode 4 ground station;
• clause 6 provides general design requirements;
• clause 7 provide protocol tests for the point-to-point functions of the system;
• a document history is contained in clause 8;
• clause A provides a detailed cross-reference to the relevant requirements contained in [1].
Note that the system can support a very wide range of functions. It is not practical to provide specific tests for all
aspects of functionality. The approach used is to provide detailed tests for the core point-to-point functionality and
to provide tests of those remaining requirements which, if wrongly implemented, could cause a deterioration in the
service offered by other VDL Mode 4 stations.
Mandating and Recommendation Phrases
a) "Shall":
- the use of the word "Shall" indicates a mandated criterion; i.e. compliance with the particular procedure
or specification is mandatory and no alternative may be applied.
b) "Should":
- the use of the word "Should" (and phrases such as "It is recommended that.", etc.) indicates that though
the procedure or cr
...